Planitop<sup>®</sup> X

Planitop^® X

Manufactured by Mapei Inc.
Brand: Planitop^®

Fast setting horizontal, vertical and overhead one component polymer modified high build cementitious repair mortar, to thickness of featheredge 0 cm (0") to 10 cm (4") per lift, with corrosion inhibitor.

Categories:

Pavements | Concrete | Restoration | Concrete Patching

Structures and Structural | Concrete | Patching | High Early Strength

Structures and Structural | Concrete | Patching | High Strength

Structures and Structural | Concrete | Patching | Horizontal

Structures and Structural | Concrete | Patching | Overhead

Structures and Structural | Concrete | Patching | Vertical

Structures and Structural | Concrete | Patching | Working Time | < 15 Minutes

Structures and Structural | Structural Members | Concrete

Certifications: PMC - Accepted for Use

ASTM International
- ASTM C109/C109M-13e1 - Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C1202-12 - Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
- ASTM C138/C138M-14 - Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- ASTM C348-14 - Flexural Strength of Hydraulic-Cement Mortars
- ASTM C39/C39M-15a - Compressive Strength of Cylindrical Concrete Specimens
- ASTM C469/C469M-14 - Static Modulus of Elasticity and Poisons's Ratio of Concrete in Compression
- ASTM C666/C666M-03(2015) - Resistance of Concrete to Rapid Freezing and Thawing
- ASTM C672/C672M-12 - Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
Canadian Standards Association
- CAN/CSA-A23.2-6B-14 [See A23.2-14] - Method of Test to Determine Adhesion by Tensile Load

Manufacturer
- Mapei Inc.

Paul LoCicero, Regional Technical Representative
Mapei Inc.
95 Walker Drive
Brampton ON L6T 5K5
plocicero@mapei.com
http://www.mapei.ca
Phone: 905-799-6884 x83232 x83232
Toll Free: 800-361-9309
Fax: 905-799-9870

Planitop^® X

About

Membership

Links

Planitop® X

About

Membership

Links

Planitop^® X