Search Results
Standard List
- Ontario Provincial Standards
- Region of Durham
- City of London
- Ontario Statutes, Regulations, etc
- American Society for Testing and Materials
- ASTM International
- ASTM 7906-14 Solution Using Toluene and the Rotary Evaporator
- ASTM A1007-15 Carbon Steel Wire for Wire Rope
- ASTM A1008/A1008M-15 Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
- ASTM A1011/A1011M-14 (Repl A569/A569M,A570/A570M) Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
- ASTM A1018/A1018M-15 Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
- ASTM A1019/A1019M (Withdrawn 2012*) Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
- ASTM A1022/A1022M-15 Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
- ASTM A1023/A1023M-15 Stranded Carbon Steel Wire Ropes for General Purposes
- ASTM A1024/A1024M-02(2012) Steel Line Pipe, Black, Plain-End, Seamless
- ASTM A1031/A1031M-12 Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
- ASTM A1032-04(2015) Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
- ASTM A1034/A1034M-10a Testing Mechanical Splices for Steel Reinforcing Bars
- ASTM A1035/A1035M-15 Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
- ASTM A1042/A1042M-04(2009) (Withdrawn 2015*) Composite Corrugated Steel Pipe for Sewers and Drains
- ASTM A1044/A1044M-15 Steel Stud Assemblies for Shear Reinforcement of Concrete
- ASTM A105/A105M-14 Carbon Steel Forgings for Piping Applications
- ASTM A1055/A1055M-10e1 Zinc and Epoxy Dual Coated Steel Reinforcing Bars
- ASTM A1057/A1057M-08(2014) Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM A1060/A1060M-14 Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A1061/A1061M-09 Testing Multi-Wire Steel Strand
- ASTM A1063/A1063M-11a Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
- ASTM A1064/A1064M-15 Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- ASTM A1075-12 Flanged Steel U-Channel Posts
- ASTM A1078/A1078M-12e1 Epoxy-Coated Steel Dowels for Concrete Pavement
- ASTM A108-13 Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM A1094/A1094M-15 Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
- ASTM A116-11 Metallic-Coated, Steel Woven Wire Fence Fabric
- ASTM A123/A123M-15 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
- ASTM A126-04(2014) Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM A134-96(2012) Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
- ASTM A135/A135M-09(2014) Electric-Resistance-Welded Steel Pipe
- ASTM A139/A139M-04(2010) Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
- ASTM A139/A139M-16 Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
- ASTM A143/A143M-07 Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
- ASTM A148/A148M-15a Steel Castings, High Strength, for Structural Purposes
- ASTM A153/A153M-05 Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM A153/A153M-09 Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM A165 (Withdrawn 1988*, Replaced By B766) Electrodeposited Coatings of Cadmium on Steel
- ASTM A167-99(2009) Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
- ASTM A182/A182M-15 Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM A183-14 Carbon Steel Track Bolts and Nuts
- ASTM A184/A184M-06(2011) Welded Deformed Steel Bar Mats for Concrete Reinforcement
- ASTM A185-02 Steel Welded Wire Reinforcement, Plain, for Concrete
- ASTM A185/A185M-07 (Withdrawn*, Repl by A1064) Steel Welded Wire Reinforcement, Plain, for Concrete
- ASTM A193/A193M-14a Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM A194/A194M-15 Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
- ASTM A216/A216M-14e1 Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
- ASTM A227/A227M-06(2011) Steel Wire, Cold-Drawn for Mechanical Springs
- ASTM A239-14 Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
- ASTM A240/A240M-14 Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM A242/A242M-13 High-Strength Low-Alloy Structural Steel
- ASTM A252-10 Welded and Seamless Steel Pipe Piles
- ASTM A252-98e1 Welded and Seamless Steel Pipe Piles
- ASTM A27/A27M-13 Steel Castings, Carbon for General Application
- ASTM A276-04 Stainless Steel Bars and Shapes
- ASTM A276-08A Stainless Steel Bars and Shapes
- ASTM A276/A276M-15 Stainless Steel Bars and Shapes
- ASTM A283/A283M-13 Low and Intermediate Tensile Strength Carbon Steel Plates
- ASTM A285/A285M-12 Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
- ASTM A29/A29M-12e1 Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
- ASTM A304-11 Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
- ASTM A307-14E1 Carbon Steel Bolts and Studs, and Threaded Rod 60 000 PSI Tensile Strength
- ASTM A308/A308M-10 Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
- ASTM A311/A311M-04(2015) Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
- ASTM A312/A312M-15b Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM A312/A312M-17 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM A313/A313M-10e1 Stainless Steel Spring Wire
- ASTM A314-15 Stainless Steel Billets and Bars for Forging
- ASTM A320/A320M-15a Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
- ASTM A325M-14 Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
- ASTM A328/A328M-13a Steel Sheet Piling
- ASTM A333/A333M-13 Seamless and Welded Steel Pipe for Low-Temperature Service
- ASTM A336/A336M-10a Alloy Steel Forgings for Pressure and High-Temperature Parts
- ASTM A351/A351M-15 Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
- ASTM A354-11 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- ASTM A36/A36M-08 Carbon Structural Steel
- ASTM A36/A36M-14 Carbon Structural Steel
- ASTM A368-95a(2013) Stainless Steel Wire Strand
- ASTM A370-14 Mechanical Testing of Steel Products
- ASTM A377-03(2008)e1 Standard Index of Specifications for Ductile-Iron Pressure Pipe
- ASTM A388/A388M-15 Ultrasonic Examination of Steel Forgings
- ASTM A392-11a Zinc-Coated Steel Chain-Link Fence Fabric
- ASTM A394-08e1 Steel Transmission Tower Bolts, Zinc-Coated and Bare
- ASTM A403/A403M-13 Wrought Austenitic Stainless Steel Piping Fittings
- ASTM A407-07(2013) Steel Wire, Cold-Drawn, for Coiled-Type Springs
- ASTM A416/A416M-02 Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
- ASTM A416/A416M-12a Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
- ASTM A421/A421M-02 Stress-Relieved Steel Wire for Prestressed Concrete
- ASTM A421/A421M-10 Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
- ASTM A426/A426M-13 Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
- ASTM A428/A428M-10 Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
- ASTM A446/A446M-93 (Withdrawn 1994, Repl By A653) Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality
- ASTM A449-14 Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
- ASTM A47/A47M-99(2014) Ferritic Malleable Iron Castings
- ASTM A474-03(2013) Aluminum-Coated Steel Wire Strand
- ASTM A48/A48M-03(2012) Gray Iron Castings
- ASTM A480/A480M-15 General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- ASTM A484/A484M-15 General Requirements for Stainless Steel Bars, Billets, and Forgings
- ASTM A489-12 Carbon Steel Lifting Eyes
- ASTM A490M-14a High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
- ASTM A491-11 Aluminum-Coated Steel Chain-Link Fence Fabric
- ASTM A492-95(2009) Stainless Steel Rope Wire
- ASTM A493-09 Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
- ASTM A496-02 Steel Wire, Deformed, for Concrete Reinforcement
- ASTM A496/A496M-07 (Withdrawn*, Repl by A1064) Steel Wire, Deformed, for Concrete Reinforcement
- ASTM A497/A497M-02 Steel Welded Wire Reinforcement, Deformed, for Concrete
- ASTM A497/A497M-07 Steel Welded Wire Reinforcement, Deformed, for Concrete
- ASTM A499-15 Steel Bars and Shapes, Carbon Rolled from "T" Rails
- ASTM A500/A500M-10a Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
- ASTM A502-03(2015) Rivets, Steel, Structural
- ASTM A510/A510M-13 General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel (Metric)
- ASTM A513/A513M-12 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- ASTM A518/A518M-99(2012) Corrosion-Resistant High-Silicon Iron Castings
- ASTM A519-06 Seamless Carbon and Alloy Steel Mechanical Tubing
- ASTM A522/A522M-11 Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
- ASTM A525M-93 (Withdrawn 1994*, Replaced By A653) Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Metric) Withdrawn 1994
- ASTM A526/A526M-90 (Withdrawn 1994 , Repl by A653) Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
- ASTM A53/A53M-12 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
- ASTM A532/A532M-10 Abrasion-Resistant Cast Irons
- ASTM A536-84 Ductile Iron Castings
- ASTM A551/A551M-08 Carbon Steel Tires for Railway and Rapid Transit
- ASTM A555/A555M-05(2014) General Requirements for Stainless Steel Wire and Wire Rods
- ASTM A563M-07(2013) Carbon and Alloy Steel Nuts (Metric)
- ASTM A564/A564M-10 Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- ASTM A568/A568M-14 Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled
- ASTM A569/A569M-98 (Withdrawn 2000*, Repl A1011) Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
- ASTM A570/A570M-98 (Withdrawn 2000*, Repl A1011) Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality (Discontinued 2000) ,
- ASTM A574M-12 Alloy Steel Socket-Head Cap Screws (Metric)
- ASTM A576-90b(2012) Steel Bars, Carbon, Hot-Wrought, Special Quality
- ASTM A580/A580M-15 Stainless Steel Wire
- ASTM A588/A588M-15 High-Strength Low-Alloy Structural Steel 50 ksi [345 MPa] Min Yield Point, with Atmospheric Corrosion Resistance
- ASTM A6/A6M-13a General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- ASTM A603-98(2014) Zinc-Coated Steel Structural Wire Rope
- ASTM A606/A606M-09a Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
- ASTM A609/A609M-91(2007) Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
- ASTM A615/A615M-15a Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
- ASTM A616/A616M-96a (Withdrawn 1999*, Repl A996) Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
- ASTM A617/A617M-96a (Withdrawn 1999*, Repl A996) Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
- ASTM A635/A635M-14 Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
- ASTM A641/A641M-09a(2014) Zinc-Coated (Galvanized) Carbon Steel Wire
- ASTM A648-12 Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
- ASTM A653/A653M-15 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A663/A663M-12 Steel Bars, Carbon, Merchant Quality, Mechanical Properties
- ASTM A666-15 Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
- ASTM A668/A668M-14 Steel Forgings, Carbon and Alloy, for General Industrial Use
- ASTM A684/A684M-14 Steel, Strip, High-Carbon, Cold-Rolled
- ASTM A702-13 Steel Fence Posts and Assemblies, Hot Wrought
- ASTM A704/A704M-06(2011) Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
- ASTM A706/A706M-15 Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
- ASTM A709/A709M-13a Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
- ASTM A715-98 (Withdrawn 2000*) Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000, Replaced by A1008, A1011)
- ASTM A716-08(2014) Ductile Iron Culvert Pipe
- ASTM A722/A722M-15 Uncoated High-Strength Steel Bar for Prestressing Concrete
- ASTM A722/A722M-98 (2003) Uncoated High-Strength Steel Bar for Prestressing Concrete
- ASTM A74-15 Cast Iron Soil Pipe and Fittings
- ASTM A741-11e1 Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
- ASTM A742/A742M-13 Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
- ASTM A743/A743M-13a Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
- ASTM A746-09(2014) Ductile Iron Gravity Sewer Pipe
- ASTM A751-14a Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
- ASTM A760/A760M-15 Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- ASTM A761/A761M-15 Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- ASTM A762/A762M-15 Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM A764-12 Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
- ASTM A767/A767M-09 Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
- ASTM A775/A 775M-06 Epoxy-Coated Steel Reinforcing Bars
- ASTM A775/A775M-07b Annex A1 Epoxy-Coated Steel Reinforcing Bars (chemical resistance, cathodic disbondment, salt spray resistance, chloride permeability, coating flexibility, relative bond strength, abrasion resistance, impact r
- ASTM A775/A775M-07b(2014) Epoxy-Coated Steel Reinforcing Bars
- ASTM A778/A778M-16 Welded, Unannealed Austenitic Stainless Steel Tubular Products
- ASTM A779/A779M-12 Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
- ASTM A780-01 Repair for Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- ASTM A780/A780M-09(2015) Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- ASTM A787/A787M-09 Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
- ASTM A792/A792M-10(2015) Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
- ASTM A795/A795M-13 Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
- ASTM A796/A796M-15a Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
- ASTM A798/A798M-07 Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
- ASTM A799/A799M-10 Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
- ASTM A807/A807M-13 Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
- ASTM A815/A815M-13a Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
- ASTM A817-12 Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
- ASTM A82-02 Steel Wire, Plain, for Concrete Reinforcement
- ASTM A82-02/A82M-07 (Withdrawn*, Repl by A1064) Steel Wire, Plain, for Concrete Reinforcement
- ASTM A820/A820M-11 Steel Fibers for Fiber-Reinforced Concrete
- ASTM A821/A821M-15 Steel Wire, Hard Drawn for Prestressing Concrete Tanks
- ASTM A824-01(2012) Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
- ASTM A849-15 Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- ASTM A854/A854M-08(2013) Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
- ASTM A858/A858M-13 Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
- ASTM A871/A871M-14 High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
- ASTM A872/A872M-07a(2012) Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
- ASTM A881/A881M-10 Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
- ASTM A882/A882M-04a(2010) Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
- ASTM A884/A884M-14 Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
- ASTM A886/A886M-12 Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
- ASTM A888-15 Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
- ASTM A899-91(2014) Steel Wire, Epoxy-Coated
- ASTM A90/A90M-13 Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
- ASTM A910/A910M-12 Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
- ASTM A924/A924M-14 General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- ASTM A929/A929M-01(2013) Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
- ASTM A930-09(2014) Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
- ASTM A931-08(2013) Tension Testing of Wire Ropes and Strand
- ASTM A933/A933M-14 Vinyl-Coated Steel Wire and Welded Wire Reinforcement
- ASTM A934/A934M-13 Epoxy-Coated Prefabricated Steel Reinforcing Bars
- ASTM A944-10(2015) Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
- ASTM A955/A955M-04a Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
- ASTM A955/A955M-15 Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
- ASTM A961/A961M-14 Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- ASTM A967-05e2 Chemical Passivation Treatments for Stainless Steel Parts
- ASTM A970/A970M-15e1 Headed Steel Bars for Concrete Reinforcement
- ASTM A974-97(2011) Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
- ASTM A975-11 Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
- ASTM A978/A978M-08(2013) Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
- ASTM A992/A992M-11(2015) Structural Steel Shapes
- ASTM A996/A996M-15 Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
- ASTM B1-13 Hard-Drawn Copper Wire
- ASTM B108/B108M-14 Aluminum-Alloy Permanent Mold Castings
- ASTM B117-11 Operating Salt Spray (Fog) Apparatus
- ASTM B137-95(2014) Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
- ASTM B138/B138M-11 Manganese Bronze Rod, Bar, and Shapes
- ASTM B148-14 Aluminum-Bronze Sand Castings
- ASTM B16/B16M-10 Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
- ASTM B209-14M Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
- ASTM B22/B22M-15 Bronze Castings for Bridges and Turntables
- ASTM B221-08 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM B221-13 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
- ASTM B240-13 Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B26/B26M-14e1 Aluminum-Alloy Sand Castings
- ASTM B265-13 Titanium and Titanium Alloy Strip, Sheet, and Plate
- ASTM B271/B271M-11e1 Copper-Base Alloy Centrifugal Castings
- ASTM B272-12 Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
- ASTM B3-13 Soft or Annealed Copper Wire
- ASTM B30-14a Copper Alloys in Ingot Form
- ASTM B316/B316M-10 Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
- ASTM B36/B36M-13 Brass Plate, Sheet, Strip, and Rolled Bar
- ASTM B418-01 Cast and Wrought Galvanic Zinc Anodes
- ASTM B418-12 Cast and Wrought Galvanic Zinc Anodes
- ASTM B447-12 Welded Copper Tube
- ASTM B449-93(2015) Chromates on Aluminum
- ASTM B452-09 Copper-Clad Steel Wire for Electronic Application
- ASTM B487-85(2013) Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross-Section
- ASTM B498/B498M-08 Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
- ASTM B499-09 (2014) Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- ASTM B584-14 Copper Alloy Sand Castings for General Applications
- ASTM B6-13 Zinc
- ASTM B62-09 Composition Bronze or Ounce Metal Castings
- ASTM B633-13 Electrodeposited Coatings of Zinc on Iron and Steel
- ASTM B669-97 (Withdrawn 1999*) Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B69-13 Rolled Zinc
- ASTM B695-04(2009) Coatings of Zinc Mechanically Deposited on Iron and Steel
- ASTM B698-10 Seamless Copper and Copper Alloy Plumbing Pipe and Tube
- ASTM B746/B746M-02(2012) Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches and Arches
- ASTM B750-12 GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
- ASTM B766-86(2015) Electrodeposited Coatings of Cadmium
- ASTM B789/B789M-99(2011) Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
- ASTM B790/B790M-11 Structural Design of Corrugated Aluminum Pipe, Pipe-Arches and Arches for Culverts, Storm Seers, and Other Buried Conduits
- ASTM B833-13 Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
- ASTM B843-13 Magnesium Alloy Anodes for Cathodic Protection
- ASTM B864/B864M-13 Corrugated Aluminum Box Culverts
- ASTM B88-09 Seamless Copper Water Tube
- ASTM B88M-14 Seamless Copper Water Tube (Metric)
- ASTM B905-00(2010) Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
- ASTM B927/B927M-13 Brass Rod, Bar, and Shapes
- ASTM B965-09(2014) High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
- ASTM C10/C10M-14 Natural Cement
- ASTM C10/C10M-14 Natural Cement
- ASTM C1005-10 Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
- ASTM C1007-11a(2015) Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
- ASTM C1012/C1012M-15 Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
- ASTM C1016-14 Determination of Water Absorption of Sealant Backing
- ASTM C1017/C1017M-13e1 Chemical Admixtures for Use in Producing Flowing Concrete
- ASTM C1019-14 Sampling and Testing Grout
- ASTM C1028-07e1 Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
- ASTM C1029-15 Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
- ASTM C1038/C1038M-14b Expansion of Hydraulic Cement Mortar Bars Stored in Water
- ASTM C1042-99 (Withdrawn 2008*) Bond Strength of Latex Systems Used With Concrete By Slant Shear
- ASTM C1059/C1059M-13 Latex Agents for Bonding Fresh To Hardened Concrete
- ASTM C1064/C1064M-12 Temperature of Freshly Mixed Portland Cement Concrete
- ASTM C1072-13e1 Measurement of Masonry Flexural Bond Strength
- ASTM C1077-15a Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- ASTM C1083-06(2011) Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
- ASTM C1089-13 Spun Cast Prestressed Concrete Poles
- ASTM C109/C109M-13e1 Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
- ASTM C1090-10 Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
- ASTM C1091-03a(2013) Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
- ASTM C110-15 Physical Testing of Quicklime, Hydrated Lime, and Limestone
- ASTM C1103M-14 Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
- ASTM C1104/C1104M-13a Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
- ASTM C1107/C1107M-14a Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
- ASTM C1116/C1116M-10a(2015) Fiber-Reinforced Concrete and Shotcrete
- ASTM C1117-89(1994) (Withdrawn 2003*) Time of Setting of Shotcrete Mixtures by Penetration Resistance
- ASTM C1131-10(2015) Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
- ASTM C1134-90(2007)e1 Water Retention of Rigid Thermal Insulations Following Partial Immersion
- ASTM C1135-00(2011) Determining Tensile Adhesion Properties of Structural Sealants
- ASTM C114-15 Chemical Analysis of Hydraulic Cement
- ASTM C1140/C1140M-14 Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM C1141/C1141M-08 Admixtures for Shotcrete
- ASTM C1147-01(2012) Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
- ASTM C1152/C1152M-04(2012)e1 Acid-Soluble Chloride in Mortar and Concrete
- ASTM C1157/C1157M-11 Hydraulic Cement
- ASTM C117-13 Materials Finer than 75-[mu]m (No. 200) Sieve in Mineral Aggregates by Washing
- ASTM C1173-10(2014) Flexible Transition Couplings for Underground Piping Systems
- ASTM C118-15 Concrete Pipe for Irrigation or Drainage
- ASTM C1183/C1183M-13 Extrusion Rate of Elastomeric Sealants
- ASTM C1184-14 Structural Silicone Sealants
- ASTM C118M-15 Concrete Pipe for Irrigation or Drainage (Metric)
- ASTM C12-14 Installing Vitrified Clay Pipe Lines
- ASTM C1202-12 Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
- ASTM C1208/C1208M-11 Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
- ASTM C1214M-13 Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
- ASTM C1216/C1216M-13 Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
- ASTM C1222-13e1 Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1227-13 Precast Concrete Septic Tanks
- ASTM C123/C123M-14 Lightweight Particles in Aggregate
- ASTM C1240-15 Silica Fume Used in Cementitious Mixtures
- ASTM C1244-11 Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
- ASTM C1246-00(2012) Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
- ASTM C1247-14 Durability of Sealants Exposed to Continuous Immersion in Liquids
- ASTM C125-15a Standard Terminology Relating to Concrete and Concrete Aggregates
- ASTM C1250-05 (Withdrawn 2015) Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
- ASTM C1260-14 Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
- ASTM C1262-10 Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
- ASTM C1266-02(2011) Flow Characteristics of Preformed Tape Sealants
- ASTM C127-15 Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
- ASTM C1272-14b Heavy Vehicular Paving Brick
- ASTM C128-15 Specific Gravity and Absorption of Fine Aggregate
- ASTM C129-14a Nonloadbearing Concrete Masonry Units
- ASTM C1292-10 Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
- ASTM C1293-08b(2015) Determination of Length Change of Concrete Due to Alkali-Silica Reaction
- ASTM C1303/C1303M-14 Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
- ASTM C1305-08 Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
- ASTM C1306-08 Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
- ASTM C131-14 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- ASTM C1315-11 Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- ASTM C1319 Concrete Grid Paving Units
- ASTM C1325-14 Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
- ASTM C1338-14 Determining Fungi Resistance of Insulation Materials and Facings
- ASTM C136/C136M-14 Sieve Analysis of Fine and Coarse Aggregates
- ASTM C1372-14a Dry-Cast Segmental Retaining Wall Units
- ASTM C138/C138M-14 Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- ASTM C1382-11 Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
- ASTM C139-14 Concrete Masonry Units for Construction of Catch Basins and Manholes
- ASTM C1399/C1399M-10(2015) Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
- ASTM C14-15a NonReinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
- ASTM C140/C140M-15 Sampling and Testing Concrete Masonry Units and Related Units
- ASTM C1404/C1404M-98(2003) (Withdrawn 2010*) Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
- ASTM C141/C141M-14 Hydrated Hydraulic Lime for Structural Purposes
- ASTM C1417M-15 Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
- ASTM C143/C143M-15 Slump of Hydraulic Cement Concrete
- ASTM C1433M-15 Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers [Metric]
- ASTM C1436-08 Materials for Shotcrete
- ASTM C1437-13 Flow of Hydraulic Cement Mortar
- ASTM C1438-13 Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
- ASTM C1439-13 Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
- ASTM C144 Masonry Mortar
- ASTM C144 Aggregate for Masonry Mortar
- ASTM C1440-08(2013)e1 Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
- ASTM C1442-11 Conducting Tests on Sealants Using Artificial Weathering Apparatus
- ASTM C1471/C1471M-05(2014)e1 Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
- ASTM C1478M-08(2013) Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric]
- ASTM C1479M-13 Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
- ASTM C1480/C1480M-07(2012) Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
- ASTM C1482-12 Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
- ASTM C14M-15a Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
- ASTM C150/C150M Portland Cement
- ASTM C1504M-15a Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
- ASTM C1522-05(2013) Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
- ASTM C1529-06a(2011) Quicklime, Hydrated Lime, and Limestone for Environmental Uses
- ASTM C1543-10a Determining the Penetration of Chloride Ion into Concrete by Ponding
- ASTM C1550-12a Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- ASTM C1556-11a Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
- ASTM C156-05 Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
- ASTM C157/C157M-08(2014)e1 Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
- ASTM C1577-15b Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
- ASTM C158-02(2012) Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C1581/C1581M-09a Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
- ASTM C1582/C1582M-11 Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
- ASTM C1583/C1583M-13 Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
- ASTM C1585-13 Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
- ASTM C1594-11 Polyimide Rigid Cellular Thermal Insulation
- ASTM C1602/C1602M-12 Mixing Water Used in the Production of Hydraulic Cement Concrete
- ASTM C1604/C1604M-05(2012) Obtaining and Testing Drilled Cores of Shotcrete
- ASTM C1609/C1609M-12 Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- ASTM C1610/C1610M-14 Static Segregation of Self-Consolidating Concrete Using Column Technique
- ASTM C1613-10 Precast Concrete Grease Interceptor Tanks
- ASTM C1618M-13 Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
- ASTM C1619-11 Elastomeric Seals for Joining Concrete Structures
- ASTM C1621/C1621M-14 Passing Ability of Self-Consolidating Concrete by J-Ring
- ASTM C1622/C1622M-10 Cold-Weather Admixture Systems
- ASTM C1628-11 Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
- ASTM C1645 / C1645M-11 Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
- ASTM C1646/C1646M-08a Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
- ASTM C165-07 Measuring Compressive Properties of Thermal Insulations
- ASTM C1670-15 Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
- ASTM C1675-11(2015) Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
- ASTM C1677-11a Joints for Concrete Box, Using Rubber Gaskets
- ASTM C1681-09 Evaluating the Tear Resistance of a Sealant Under Constant Strain
- ASTM C1688/C1688M-14a Density and Void Content of Freshly Mixed Pervious Concrete
- ASTM C1697-10 Blended Supplementary Cementitious Materials
- ASTM C170/C170M-15a Compressive Strength of Dimension Stone
- ASTM C1707-11 Pozzolanic Hydraulic Lime for Structural Purposes
- ASTM C1708/C1708M-15 Self-leveling Mortars Containing Hydraulic Cements
- ASTM C1709-11 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
- ASTM C171 Sheet Materials for Curing Concrete
- ASTM C171-92 Sheet Materials for Curing Concrete
- ASTM C172/C172M-14a Sampling Freshly Mixed Concrete
- ASTM C173/C173M-14 Air Content of Freshly Mixed Concrete by the Volumetric Method
- ASTM C1738/C1738M-13 High-Shear Mixing of Hydraulic Cement Pastes
- ASTM C174 Measuring Thickness of Concrete Elements Using Drilled Concrete
- ASTM C174/C174M-13 Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
- ASTM C1740-10 Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
- ASTM C1741-12 Bleed Stability of Cementitious Post-Tensioning Tendon Grout
- ASTM C1745/C1745M-11 Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
- ASTM C1746/C1746M-12 Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
- ASTM C1747/C1747M-13 Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
- ASTM C1758/C1758M-15 Fabricating Test Specimens with Self-Consolidating Concrete
- ASTM C1761/C1761M-15 Lightweight Aggregate for Internal Curing of Concrete
- ASTM C1765-13 Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- ASTM C177-10 Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
- ASTM C1781/C1781M-1 Surface Infiltration Rate of Permeable Unit Pavement Systems
- ASTM C1802-14e1 Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
- ASTM C1804-14e1 Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
- ASTM C185-15a Standard Test Method for Air Content of Hydraulic Cement Mortar
- ASTM C187-11e1 Normal Consistency of Hydraulic Cement
- ASTM C188-15 Density of Hydraulic Cement
- ASTM C190-85 (Withdrawn 1990*) Tensile Strength of Hydraulic Cement Mortars
- ASTM C191-13 Time of Setting of Hydraulic Cement by Vicat Needle
- ASTM C192/C192M-15 Making and Curing Concrete Test Specimens in the Laboratory
- ASTM C203-05a(2012) Breaking Load and Flexural Properties of Block-Type Thermal Insulation
- ASTM C209-12 Cellulosic Fiber Insulating Board
- ASTM C215-14 Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
- ASTM C216-15 Facing Brick (Solid Masonry Units Made from Clay or Shale)
- ASTM C219-13 Hydraulic Cement
- ASTM C226-12 Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
- ASTM C227-10 Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
- ASTM C230/C230M-14 Flow Table for Use in Tests of Hydraulic Cement
- ASTM C231/C231M-14 Air Content of Freshly Mixed Concrete by the Pressure Method
- ASTM C232/C232M-14 Bleeding of Concrete
- ASTM C233/C233M-14 Air-Entraining Admixtures for Concrete, Standard Test Method
- ASTM C234-91a (Withdrawn*, No Replacement) Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel
- ASTM C25-11e1 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
- ASTM C260/260M-10a Air-Entraining Admixtures for Concrete
- ASTM C266 Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
- ASTM C267-01(2012) Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
- ASTM C270-14a Mortar for Unit Masonry
- ASTM C272/C272M-12 Water Absorption of Core Materials for Structural Sandwich Constructions
- ASTM C273/C273M-11 Shear Properties of Sandwich Core Materials
- ASTM C29/C29M-09 Bulk Density (Unit Weight) and Voids in Aggregate
- ASTM C293/C293M-10 Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
- ASTM C294-12 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
- ASTM C296/C296M-00(2015) Asbestos-Cement Pressure Pipe
- ASTM C297/C297M-15 Flatwise Tensile Strength of Sandwich Constructions
- ASTM C301-13 Vitrified Clay Pipe
- ASTM C303-10 Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
- ASTM C307-03(2012) Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
- ASTM C309-07 Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM C31/C31M-15 Making and Curing Concrete Test Specimens in the Field
- ASTM C311/C311M-13 Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
- ASTM C315-07(2011) Clay Flue Linings
- ASTM C33/C33M-13 Concrete Aggregates
- ASTM C330/C330M-09 Lightweight Aggregates for Structural Concrete
- ASTM C331/C331M-10 Lightweight Aggregates for Concrete Masonry Units
- ASTM C332-09 Lightweight Aggregates for Insulating Concrete
- ASTM C341/C341M-06 Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
- ASTM C348-14 Flexural Strength of Hydraulic-Cement Mortars
- ASTM C351-92b(1999)e1 (Withdrawn 2008) Mean Specific Heat of Thermal Insulation
- ASTM C356-10 Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- ASTM C359-13 Early Stiffening of Hydraulic Cement (Mortar Method)
- ASTM C361-05e1 Reinforced Concrete Low-Head Pressure Pipe
- ASTM C361-16 Reinforced Concrete Low-Head Pressure Pipe
- ASTM C361-16 Reinforced Concrete Low-Head Pressure Pipe
- ASTM C361M-14a Reinforced Concrete Low-Head Pressure Pipe [Metric]
- ASTM C387/C387M-11b Packaged, Dry, Combined Materials for Mortar and Concrete
- ASTM C39 Compressive Strength of Cylindrical Concrete Specimens
- ASTM C39/C39M-15a Compressive Strength of Cylindrical Concrete Specimens
- ASTM C393/C393M-11e1 Core Shear Properties of Sandwich Constructions by Beam Flexure
- ASTM C4-04(2009) Clay Drain Tile and Perforated Clay Drain Tile
- ASTM C403/C403M-08 Time of Setting of Concrete Mixtures by Penetration Resistance
- ASTM C411-11 Hot-Surface Performance of High-Temperature Thermal Insulation
- ASTM C413-01(2012) Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM C42/C42M-13 Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
- ASTM C423-09a Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
- ASTM C425-04(2013) Compression Joints for Vitrified Clay Pipe and Fittings
- ASTM C428/C428M-05(2011)e1 Asbestos-Cement Nonpressure Sewer Pipe
- ASTM C443M-12 Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
- ASTM C451-13 Early Stiffening of Hydraulic Cement (Paste Method)
- ASTM C457 Microscopical Determination of Parameters of the Air Void System in Hardened Concrete
- ASTM C457/C457M-12 Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
- ASTM C465-10 Processing Additions for Use in the Manufacture of Hydraulic Cements
- ASTM C469/C469M-14 Static Modulus of Elasticity and Poisons's Ratio of Concrete in Compression
- ASTM C473-12 Physical Testing of Gypsum Panel Products
- ASTM C476-10 Grout for Masonry
- ASTM C478M-15 Precast Reinforced Concrete Manhole Sections (Metric)
- ASTM C490/C490M-11e1 Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- ASTM C494/C494M-15 Chemical Admixtures for Concrete
- ASTM C495/C495M-12 Compressive Strength of Lightweight Insulating Concrete
- ASTM C496/C496M-11 Splitting Tensile Strength of Cylindrical Concrete Specimens
- ASTM C497M-15 Concrete Pipe, Manhole Sections, or Tile [Metric]
- ASTM C500/C500M-07(2011)e1 Asbestos-Cement Pipe
- ASTM C501-84 Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
- ASTM C506M-15 Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
- ASTM C507-12 Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
- ASTM C507M-14 Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
- ASTM C509-06(2011) Elastomeric Cellular Preformed Gasket and Sealing Material
- ASTM C510-05a(2011) Staining and Color Change of Single- or Multicomponent Joint Sealants
- ASTM C511-09 Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
- ASTM C512/C512M-10 Creep of Concrete in Compression
- ASTM C513/C513M-11e1 Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
- ASTM C518-10 Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM C531-00(2012) Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM C534/C534M-14 Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- ASTM C535-12 Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- ASTM C553-13 Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
- ASTM C563-13 Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
- ASTM C564-14 Rubber Gaskets for Cast Iron Soil Pipe and Fittings
- ASTM C566-13 Total Evaporable Moisture Content of Aggregate by Drying
- ASTM C567/C567M-14 Determining Density of Structural Lightweight Concrete
- ASTM C570-00 (Withdrawn 2002*) Oil- and Resin-Base Caulking Compound for Building Construction
- ASTM C578-15 Rigid, Cellular Polystyrene Thermal Insulation
- ASTM C579-01(2012) Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
- ASTM C580-02(2012) Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
- ASTM C581-03(2008)e1 Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
- ASTM C593-06(2011) Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
- ASTM C595/C595M-15 Blended Hydraulic Cements
- ASTM C596-09 Drying Shrinkage of Mortar Containing Hydraulic Cement
- ASTM C603-14 Extrusion Rate and Application Life of Elastomeric Sealants
- ASTM C612-04 Mineral Fiber Block and Board Thermal Insulation
- ASTM C617/C617M-15 Capping Cylindrical Concrete Specimens
- ASTM C618-15 Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- ASTM C633-13 Adhesion or Cohesion Strength of Thermal Spray Coatings
- ASTM C639-15 Rheological (Flow) Properties of Elastomeric Sealants
- ASTM C641-09 Iron Staining Materials in Lightweight Concrete Aggregates
- ASTM C642-13 Density, Absorption, and Voids in Hardened Concrete
- ASTM C655M-15 Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
- ASTM C661-06(2011) Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
- ASTM C665-12 Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
- ASTM C666/C666M-03 Procedure A Resistance of Concrete to Rapid Freezing and Thawing - Rapid Freezing and Thawing in Water
- ASTM C666/C666M-03(2008) Procedure B Resistance of Concrete to Rapid Freezing and Thawing - Rapid Freezing in Air and Thawing in Water
- ASTM C666/C666M-03(2015) Resistance of Concrete to Rapid Freezing and Thawing
- ASTM C67-14 Sampling and Testing Brick and Structural Clay Tile
- ASTM C670-10 Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM C672-84 Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
- ASTM C672/C672M-12 Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
- ASTM C679-15 Tack-Free Time of Elastomeric Sealants
- ASTM C684-99(2003) (Withdrawn*) Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
- ASTM C685/C685M-11 Concrete Made by Volumetric Batching and Continuous Mixing
- ASTM C686-90(2011)e1 Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
- ASTM C695-91(2010) Compressive Strength of Carbon and Graphite
- ASTM C697-10 Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM C700-13 Vitrified Clay Pipe , Extra Strength, Standard Strength, and Perforated
- ASTM C702/C702M-11 Reducing Samples of Aggregate to Testing Size
- ASTM C711-14 Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM C712-14 Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM C717-13 Standard Terminology of Building Seals and Sealants
- ASTM C719-14 Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
- ASTM C744-14 Prefaced Concrete and Calcium Silicate Masonry Units
- ASTM C765-97(2015) Low-Temperature Flexibility of Preformed Tape Sealants
- ASTM C76M-15 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- ASTM C76M-15 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
- ASTM C779/C779M-12 Abrasion Resistance of Horizontal Concrete Surfaces
- ASTM C78/C78M-15a Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- ASTM C780-15 Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
- ASTM C782-13 Softness of Preformed Tape Sealants
- ASTM C786/C786M-10 Fineness of Hydraulic Cement and Raw Materials by the 300-ìm (No. 50), 150-ìm (No. 100), and 75-ìm (No. 200) Sieves by Wet Methods
- ASTM C789-00 (Withdrawn 2000*, Replaced by C1433) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
- ASTM C789M-98 (Withdrawn 2000*, Repl by C1433M) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
- ASTM C792-15 Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
- ASTM C793-05(2010) Effects of Accelerated Weathering on Elastomeric Joint Sealants
- ASTM C794-15a Adhesion-in-Peel of Elastomeric Joint Sealants
- ASTM C795-08(2013) Thermal Insulation for Use in Contact with Austenitic Stainless Steel
- ASTM C796/C796M-12 Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
- ASTM C802-09a Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM C805/C805-13a Rebound Number of Hardened Concrete
- ASTM C806-12 Restrained Expansion of Expansive Cement Mortar
- ASTM C807-13 Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
- ASTM C822-11 Standard Terminology Relating to Concrete Pipe and Related Products
- ASTM C823/C823M-12 Examination and Sampling of Hardened Concrete in Constructions
- ASTM C825-06(2011) Precast Concrete Barriers
- ASTM C827/C827M-10 Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
- ASTM C828-11 Low-Pressure Air Test of Vitrified Clay Pipe Lines
- ASTM C834-14 Latex Sealants
- ASTM C836/C836M-15 High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
- ASTM C845/C845M-12 Expansive Hydraulic Cement
- ASTM C850-00 (Withdrawn 2000*, Replaced by C1433) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings
- ASTM C850M-00 (Withdrawn 2000*, Repl By C1433M) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings
- ASTM C857-14 Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
- ASTM C858-10e1 Underground Precast Concrete Utility Structures
- ASTM C869/C869M-11 Foaming Agents Used in Making Preformed Foam for Cellular Concrete
- ASTM C87-03 Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- ASTM C87/C87M-10 Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
- ASTM C873/C873M-10a Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
- ASTM C876-09 Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
- ASTM C877M-08 External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
- ASTM C88-13 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
- ASTM C881/C881M-14 Epoxy-Resin-Base Bonding Systems for Concrete
- ASTM C882 Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
- ASTM C882/C882M-13a Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
- ASTM C887-13 Packaged, Dry, Combined Materials for Surface Bonding Mortar
- ASTM C890-13 Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
- ASTM C891-11 Installation of Underground Precast Concrete Utility Structures
- ASTM C896-04(2009) Standard Terminology Relating to Clay Products
- ASTM C90-14 Loadbearing Concrete Masonry Units
- ASTM C900-15 Pullout Strength of Hardened Concrete
- ASTM C902 Pedestrian and Light Traffic Paving Brick
- ASTM C904-01(2012) Chemical-Resistant Nonmetallic Materials
- ASTM C907-03(2012) Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
- ASTM C91/C91M-12 Masonry Cement
- ASTM C913-08 Precast Concrete Water and Wastewater Structures
- ASTM C915-79(2010) Precast Reinforced Concrete Crib Wall Members
- ASTM C918/C918M-13 Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
- ASTM C920-14a Elastomeric Joint Sealants
- ASTM C923M-07 Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
- ASTM C923M-08b Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
- ASTM C924M-02(2009) (Withdrawn* 2013, no repl) Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
- ASTM C928/C928M-13 Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
- ASTM C936/C936M-15 Solid Concrete Interlocking Paving Units
- ASTM C939-10 Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
- ASTM C94/C94M-15a Ready-Mixed Concrete
- ASTM C942-10 Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
- ASTM C944/C944M-99(2005)e1 Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
- ASTM C952-12 Bond Strength of Mortar to Masonry Units
- ASTM C957/C957M-15 High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
- ASTM C969M-02(2009) Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
- ASTM C977-10 Quicklime and Hydrated Lime for Soil Stabilization
- ASTM C979/C979M-10 Pigments for Integrally Colored Concrete
- ASTM C981-05(2013) Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM C985M-15a Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
- ASTM C989/C989M-14 Slag Cement for Use in Concrete and Mortars
- ASTM C990-08 Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
- ASTM C990M-09 Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
- ASTM D1000-10 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
- ASTM D1002-10 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D1003-11e1 Haze and Luminous Transmittance of Transparent Plastics
- ASTM D1005-95(2013) Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
- ASTM D1042-12 Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
- ASTM D1043-10 Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
- ASTM D1044-08e1 Resistance of Transparent Plastics to Surface Abrasion
- ASTM D1047-11 Poly(Vinyl Chloride) Jacket for Wire and Cable
- ASTM D1056-07 Flexible Cellular Materials-Sponge or Expanded Rubber
- ASTM D1073-11 Fine Aggregate for Bituminous Paving Mixtures
- ASTM D1074-09 Compressive Strength of Bituminous Mixtures
- ASTM D1075-11 Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
- ASTM D1084-08 Viscosity of Adhesives
- ASTM D1117-01 (Withdrawn 2009*) Evaluating Nonwoven Fabrics
- ASTM D1125-95(2009) Electrical Conductivity and Resistivity of Water
- ASTM D113-07 Ductility of Bituminous Materials
- ASTM D1139/D1139M-15 Aggregate for Single or Multiple Bituminous Surface Treatments
- ASTM D1140-14 Amount of Material in Soils Finer Than 75-µm (No. 200) Sieve in Soils by Washing
- ASTM D1141-98(2008) Preparation of Substitute Ocean Water
- ASTM D1143/D1143M-07e1 Deep Foundations Under Static Axial Compressive Load
- ASTM D1148-13 Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
- ASTM D1149-07(2012) Rubber Deterioration-Surface Ozone Cracking in a Chamber
- ASTM D1155-10(2015) Roundness of Glass Spheres
- ASTM D1160-06 Distillation of Petroleum Products at Reduced Pressure
- ASTM D1167-65(1970) (Withdrawn 1971*, Repl D2939) Asphalt-Base Emulsions for Use as Protective Coatings for Built-Up Roofs
- ASTM D1171-99(2007) Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
- ASTM D1188-07(2015) Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
- ASTM D1190-97 (Withdrawn 2002*, Replaced by D6690) Concrete Joint Sealer, Hot-Applied Elastic Type
- ASTM D1191-84(1994) (Withdrawn 1996*, Repl D5329) Concrete Joint Sealers
- ASTM D1204-08 Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- ASTM D1210-05(2010) Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
- ASTM D1212-91(2013) Measurement of Wet Film Thickness of Organic Coatings
- ASTM D1214-10(2015)e1 Sieve Analysis of Glass Spheres
- ASTM D1227-13 Emulsified Asphalt Used as a Protective Coating for Roofing
- ASTM D123-15 Standard Terminology Relating to Textiles
- ASTM D1238-10 Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1248-12 Polyethylene Plastics Extrusion Materials For Wire and Cable
- ASTM D1252-06 Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
- ASTM D127-08 Drop Melting Point of Petroleum Wax, Including Petrolatum
- ASTM D1293-12 pH of Water
- ASTM D1298-99(2005) Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- ASTM D130-10 Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- ASTM D1308-02(2013) Effect of Household Chemicals on Clear and Pigmented Organic Finishes
- ASTM D1309-93(2015) Settling Properties of Traffic Paints During Storage
- ASTM D1310-01 Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
- ASTM D1310-14 Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
- ASTM D1327-04(2012)e1 Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
- ASTM D1330-04(2015)e1 Rubber Sheet Gaskets
- ASTM D1353-09 Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
- ASTM D1388-08(2012) Stiffness of Fabrics
- ASTM D139-12 Float Test for Bituminous Materials
- ASTM D1394-76(2009) Chemical Analysis of White Titanium Pigments
- ASTM D140/D140M-09 Sampling Bituminous Materials
- ASTM D140/D140M-15 Sampling Bituminous Materials
- ASTM D1415-06(2012) Rubber Property-International Hardness
- ASTM D1429-08 Specific Gravity of Water and Brine
- ASTM D1457-92 (Withdrawn 1996*, Repl D4894/D4895) Polytetrafluorethylene (PTFE) Molding and Extrusion Materials
- ASTM D1458-13 Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
- ASTM D146-04(2012)e1 Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
- ASTM D1474/D1474M-13 Indentation Hardness of Organic Coatings
- ASTM D1475-13 Density of Liquid Coatings, Inks, and Related Products
- ASTM D149-09(2013) Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating
- ASTM D150-11 AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
- ASTM D1500-07 ASTM Color of Petroleum Products (ASTM Color Scale)
- ASTM D1505-10 Density of Plastics by the Density-Gradient Technique
- ASTM D1510-12 Carbon Black—Iodine Adsorption Number
- ASTM D1525-09 Vicat Softening Temperature of Plastics
- ASTM D1527-99(2005) (Withdrawn* 2014) Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
- ASTM D1531-06 Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
- ASTM D1556/D1556M-15 Density and Unit Weight of Soil in Place by Sand-Cone Method
- ASTM D1557-15 Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000ft-lbf/ft3 (2,700 kN-m/m3))
- ASTM D1558-10 Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
- ASTM D1566-11 Standard Terminology Relating to Rubber
- ASTM D1598-02(2009) Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
- ASTM D1599-14e1 Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
- ASTM D16-12 Paint, Related Coatings, Materials, and Applications
- ASTM D1600-08 Standard Terminology for Abbreviated Terms Relating to Plastics
- ASTM D1603-12 Carbon Black Content In Olefin Plastics
- ASTM D1621-10 Compressive Properties Of Rigid Cellular Plastics
- ASTM D1622/D1622M-14 Apparent Density of Rigid Cellular Plastics
- ASTM D1635/D1635M-12 Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
- ASTM D1640/D1640M-14 Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
- ASTM D1644-01(2012) Nonvolatile Content of Varnishes
- ASTM D1652-11e1 Epoxy Content of Epoxy Resins
- ASTM D1653-13 Water Vapor Transmission of Organic Coating Films
- ASTM D1654-08 Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
- ASTM D1655-13a Aviation Turbine Fuels
- ASTM D1670/D1670M-11 Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
- ASTM D1693-12 Environmental Stress-Cracking of Ethylene Plastics
- ASTM D1706 (Withdrawn 1966*, Replaced by D2240) Indentation Hardness of Plastics by Means
- ASTM D1709-15 Impact Resistance of Plastic Film by the Free-Falling Dart Method
- ASTM D1729-96(2009) Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
- ASTM D173/D173M-03(2011)e1 Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
- ASTM D1737-85 (Withdrawn 1987*, Replaced by D522) Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus
- ASTM D1751 Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
- ASTM D1752-04a(2013) Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM D1754/D1754M-09 Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
- ASTM D1755-15 Poly(Vinyl Chloride) Resins
- ASTM D1763-00(2013) Epoxy Resins
- ASTM D1776-08e1 Conditioning and Testing Textiles
- ASTM D1777-96(2015) Thickness of Textile Materials
- ASTM D1784-08 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- ASTM D1785-15 Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
- ASTM D1790-14 Brittleness Temperature of Plastic Sheeting by Impact
- ASTM D1795-96(2007)e1 Intrinsic Viscosity of Cellulose
- ASTM D1822-06 Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
- ASTM D1849-95(2008) Package Stability of Paint
- ASTM D185-07 Coarse Particles in Pigments, Pastes, and Paints
- ASTM D1850-74(1979) (Withdrawn 1989*) Concrete Joint Sealer, Cold Application Type
- ASTM D1869-15 Rubber Rings for Fiber-Reinforced Cement Pipe
- ASTM D1875-03(2008)e1 Density of Adhesives in Fluid Form
- ASTM D1876-08 Peel Resistance of Adhesives (T Peel Test)
- ASTM D1883-14 CBR (California Bearing Ratio) of Laboratory-Compacted Soils
- ASTM D1894-08 Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
- ASTM D1925-70(1988) (Withdrawn 1995*) Yellowness Index of Plastics
- ASTM D1929-12 Determining Ignition Temperature of Plastics
- ASTM D1970/D1970-14 Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
- ASTM D1987-07(2012) Biological Clogging of Geotextile or Soil/Geotextile Filters
- ASTM D2000-12 Rubber Products in Automotive Applications
- ASTM D2006-65 (Withdrawn 1975*) Characteristic Groups in Rubber Extender and Processing Oils by the Precipitation Method
- ASTM D2007-11 Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
- ASTM D2026/D2026M-15 Cutback Asphalt (Slow-Curing Type)
- ASTM D2027/D2027M-13 Cutback Asphalt (Medium-Curing Type)
- ASTM D2028/D2028M-15 Cutback Asphalt (Rapid-Curing Type)
- ASTM D2041/D2041M-11 Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
- ASTM D2042-09 Solubility of Asphalt Materials in Trichloroethylene
- ASTM D2074-07 Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
- ASTM D2093-03(2011) Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM D2103-15 Polyethylene Film and Sheeting
- ASTM D2105-01(2014) Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
- ASTM D2122-15 Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2126-09 Response of Rigid Cellular Plastics to Thermal and Humid Aging
- ASTM D2137-11 Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics
- ASTM D2143-15 Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
- ASTM D2152-13 Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
- ASTM D2166/D2166M-13 Unconfined Compressive Strength of Cohesive Soil
- ASTM D2167-08 Density and Unit Weight of Soil in Place by the Rubber Balloon Method
- ASTM D2170/D2170M-10 Kinematic Viscosity of Asphalts (Bitumens)
- ASTM D2171/D2171M-10 Viscosity of Asphalts by Vacuum Capillary Viscometer
- ASTM D2172/D2172M-11 Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
- ASTM D2178/D2178M-14 Asphalt Glass Felt Used in Roofing and Waterproofing
- ASTM D2197-13 Adhesion of Organic Coatings by Scrape Adhesion
- ASTM D2200-13 Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
- ASTM D2202-00(2014) Slump of Sealants
- ASTM D2205-85(2010) Selection of Tests for Traffic Paints
- ASTM D2227-96(2011) Natural Rubber (NR) Technical Grades
- ASTM D2235-04(2011) Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
- ASTM D2237-70 (Withdrawn 1980*) Rate-of-Rise (Volume Increase) Properties of Urethane Foaming Systems
- ASTM D2239-12a Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
- ASTM D2240-05(2010) Rubber Property-Durometer Hardness
- ASTM D2241-05 Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
- ASTM D2243-95(2014) Freeze-Thaw Resistance of Water-Borne Coatings
- ASTM D2244-11 Calculation of Color Differences From Instrumentally Measured Color Coordinates
- ASTM D2247-11 Testing Water Resistance of Coatings in 100% Relative Humidity
- ASTM D2248-01a(2007) Detergent Resistance of Organic Finishes
- ASTM D2256/D2256M-10e1 Tensile Properties of Yarns by the Single-Strand Method
- ASTM D226/D226M-09 Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM D227/D227M-03(2011)e1 Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
- ASTM D2274-10 Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
- ASTM D2282-99(2005) (Withdrawn 2007*) Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
- ASTM D229-09b Rigid Sheet and Plate Materials Used for Electrical Insulation
- ASTM D2290-12 Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
- ASTM D2301-10 Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM D2308-07(2003) Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
- ASTM D2321-14e1 Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- ASTM D2344/D2344M-00(2006) Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
- ASTM D2369-10(2015)e1 Volatile Content of Coatings
- ASTM D2370-98(2010) Tensile Properties of Organic Coatings
- ASTM D2371-85(2010) Pigment Content of Solvent-Reducible Paints
- ASTM D2392-96(2011) Color Of Dyed Aviation Gasolines
- ASTM D2393-86 (Withdrawn*) Viscosity of Epoxy Resins and Related Components
- ASTM D2397/D2397M-13 Cationic Emulsified Asphalt
- ASTM D2398-82 (Withdrawn 1984, Replaced By D36) Softening Point of Bitumen in Ethylene Glycol (Ring-and-Ball)
- ASTM D2412-11 Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- ASTM D2415-98(2008) Ash in Coal Tar and Pitch
- ASTM D2419-02 Sand Equivalent Value of Soils and Fine Aggregates
- ASTM D242/D242M-09 (2014) Mineral Filler For Bituminous Paving Mixtures
- ASTM D243/D243M-14 Residue of Specified Penetration
- ASTM D2434-68(2006) Permeability of Granular Soils (Constant Head)
- ASTM D244-04 Emulsified Asphalts
- ASTM D244-09 Emulsified Asphalts (Viscosity, Sieve Test, Particle Charge Test, Cement Mixing Test, 5-day Settlement Test, Residue)
- ASTM D2444-99(2010) Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- ASTM D2455-89(1996)e1 (Withdrawn 2005*) Identification of Carboxylic Acids in Alkyd Resins
- ASTM D2457-13 Specular Gloss of Plastic Films and Solid Plastics
- ASTM D2464-15 Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
- ASTM D2466-15 Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
- ASTM D2467-15 Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
- ASTM D2485-91(2013) Evaluating Coatings For High Temperature Service
- ASTM D2486-06(2012)e1 Scrub Resistance of Wall Paints
- ASTM D2487-11 Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- ASTM D2488-09a Description and Identification of Soils (Visual-Manual Procedure)
- ASTM D25-12 Round Timber Piles
- ASTM D2513-13 Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
- ASTM D256-10 Determining the Izod Pendulum Impact Resistance of Plastics
- ASTM D2563-08 Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
- ASTM D2564-12 Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
- ASTM D2565-99(2008) Xenon Arc Exposure of Plastics Intended for Outdoor Applications
- ASTM D2566 (Withdrawn 1993*) Linear Shrinkage of Cured Thermosetting Casting Resins During Cure (Withdrawn 1993)
- ASTM D257-14 DC Resistance or Conductance of Insulating Materials
- ASTM D2574-06(2012) Resistance of Emulsion Paints in the Container to Attack by Microorganisms
- ASTM D2583-07 Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
- ASTM D2584-11 Ignition Loss of Cured Reinforced Resins
- ASTM D2609-15 Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
- ASTM D2621-87(2011) Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- ASTM D2624-09 Electrical Conductivity of Aviation and Distillate Fuels
- ASTM D2628-91(2011) Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
- ASTM D2643/D2643M-08(2013)e1 Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
- ASTM D2657-07 Heat Fusion Joining of Polyolefin Pipe and Fittings
- ASTM D2665-14 Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- ASTM D2671-13 Heat-Shrinkable Tubing for Electrical Use
- ASTM D2672-14 Joints for IPS PVC Pipe Using Solvent Cement
- ASTM D2680-01(2014) Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
- ASTM D2683-14 Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
- ASTM D2697-03(2008) Volume Nonvolatile Matter in Clear or Pigmented Coatings
- ASTM D2709-96(2011)e1 Water and Sediment in Middle Distillate Fuels by Centrifuge
- ASTM D2726/D2726M-14 Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
- ASTM D2729-11 Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
- ASTM D2734-09 Void Content of Reinforced Plastics
- ASTM D2737-12a Polyethylene (PE) Plastic Tubing
- ASTM D2749-02(2008) Standard Symbols for Dimensions of Plastic Pipe Fittings
- ASTM D2751-05 (Withdrawn* 2014) Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
- ASTM D2754-10 High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
- ASTM D276-12 Identification of Fibers in Textiles
- ASTM D2765-11 Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
- ASTM D2774-12 Underground Installation of Thermoplastic Pressure Piping
- ASTM D2792-69(2015) Solvent and Fuel Resistance of Traffic Paint
- ASTM D2794-93(2010) Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
- ASTM D2805-96a(2003) Hiding Power of Paints by Reflectometry
- ASTM D2834-95(2008) Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion
- ASTM D2835-89(2012) Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
- ASTM D2837-13e1 Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
- ASTM D2839-10 Melt Index Strand for Determining Density of Polyethylene
- ASTM D2842-12 Water Absorption of Rigid Cellular Plastics
- ASTM D2843-10 Density of Smoke from the Burning or Decomposition of Plastics
- ASTM D2846/D2846M-09be1 Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
- ASTM D2850-03a(2007) Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
- ASTM D2855-96(2010) Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
- ASTM D2859-06(2011) Ignition Characteristics of Finished Textile Floor Covering Materials
- ASTM D2863-12 Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
- ASTM D2872-12e1 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
- ASTM D2919-01(2014) Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D2922-05 (Withdrawn 2007*, Replaced by D6938) Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
- ASTM D2938-95 (Withdrawn 2005*, Replaced by D7012) Unconfined Compressive Strength of Intact Rock Core Specimens
- ASTM D2939-03 Emulsified Bitumens Used as Protective Coatings
- ASTM D2940/D2940M Graded Aggregate Material For Bases or Subbases for Highways or Airports
- ASTM D2940/D2940M-09 Graded Aggregate Material For Bases or Subbases for Highways or Airports
- ASTM D2950/D2950M-14 Density of Bituminous Concrete in Place by Nuclear Methods
- ASTM D2990-09 Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
- ASTM D2992-12 Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
- ASTM D2995-99(2009) Estimating Application Rate of Bituminous Distributors
- ASTM D2996-15 Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
- ASTM D3005-10 Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM D3006-10 Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
- ASTM D3017-05 (Withdrawn 2007*) Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
- ASTM D3034-14a Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
- ASTM D3035-15 Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
- ASTM D3039/D3039M-14 Tensile Properties of Polymer Matrix Composite Materials
- ASTM D3045-92(2010) Heat Aging of Plastics Without Load
- ASTM D3080/D3080M-11 Direct Shear Test of Soils Under Consolidated Drained Conditions
- ASTM D3137-81(2007) Rubber Property—Hydrolytic Stability
- ASTM D3139 (R2005) Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
- ASTM D3139-98(2011) Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
- ASTM D3143/D3143M-13 Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
- ASTM D3155-11 Lime Content of Uncured Soil-Lime Mixtures
- ASTM D3161/D3161M-12 Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
- ASTM D3163-01(2014) Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM D3168-85(2011) Qualitative Identification of Polymers in Emulsion Paints
- ASTM D3171-11 Constituent Content of Composite Materials
- ASTM D3184-11 Rubber—Evaluation of NR (Natural Rubber)
- ASTM D3202-94(2004e1) (Withdrawn 2007*) Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
- ASTM D3203/D3203M-11 Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
- ASTM D3212-07(2013) Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
- ASTM D3218-07(2012) Polyolefin Monofilaments
- ASTM D3261-12e1 Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
- ASTM D3262-11 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
- ASTM D3271-87(2012) Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
- ASTM D3273-12 Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
- ASTM D3274-09e1 Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
- ASTM D3278-96(2011) Flash Point of Liquids by Small Scale Closed-Cup Apparatus
- ASTM D3282-09 Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
- ASTM D3299-10 Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
- ASTM D3330/D3330M-04(2010) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
- ASTM D3335-85a(2009) Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
- ASTM D3350-14 Polyethylene Plastics Pipe and Fittings Materials
- ASTM D3359-09e2 Measuring Adhesion by Tape Test
- ASTM D3363-05(2011)e2 Film Hardness by Pencil Test
- ASTM D3381/D3381M-13 Viscosity-Graded Asphalt Cement for Use in Pavement Construction
- ASTM D3405-97 (Withdrawn 2002*, Replaced by D6690) Joint Sealants, Hot-Applied, for Concrete and Asphalt Pavements
- ASTM D3406-95(2006) (Withdrawn*, Not Replaced) Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
- ASTM D3407-78(1994) (Withdrawn 1996*, Repl D5329) Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements
- ASTM D3410/D3410M-03(2008) Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
- ASTM D3417-99 (Withdrawn 2004*, Replaced by D3418) Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
- ASTM D3418-08 Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM D344-11 Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
- ASTM D345-02(2010) Sampling and Testing Calcium Chloride for Roads and Structural Applications
- ASTM D3451-06(2012) Testing Coating Powders and Powder Coatings
- ASTM D3517-14 Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D3535-07a Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
- ASTM D3542-08(2013) Preformed Polychloroprene Elastomeric Joint Seals for Bridges
- ASTM D3549/D3549M-11 Thickness or Height of Compacted Bituminous Paving Mixture Specimens
- ASTM D3552-12 Tensile Properties of Fiber Reinforced Metal Matrix Composites
- ASTM D3574-11 Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
- ASTM D3575-08 Flexible Cellular Materials Made From Olefin Polymers (Property tests - density, compressive strength, compression set, tensile strength, elongation at break, tear strength)
- ASTM D36/D36M-14e1 Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM D3618-05(2015) Detection of Lead in Paint and Dried Paint Films
- ASTM D3628-08 Selection and Use of Emulsified Asphalts
- ASTM D3665-07e1 Random Sampling of Construction Materials
- ASTM D3665-12 Random Sampling of Construction Materials
- ASTM D3666-11 Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- ASTM D3678-14 Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
- ASTM D3679-11 Rigid Poly(Vinyl Chloride) (PVC) Siding
- ASTM D3681-12e1 Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
- ASTM D3689-07 Deep Foundations Under Static Axial Tensile Load
- ASTM D3718-85a(2010) Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
- ASTM D3723-05(2011) Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
- ASTM D3740-12a Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
- ASTM D3744/D3744M-11a Aggregate Durability Index
- ASTM D3747-79(2007) Emulsified Asphalt Adhesive for Adhering Roof Insulation
- ASTM D3754-14 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
- ASTM D3759/D3759M-05(2011) Breaking Strength and Elongation of Pressure-Sensitive Tape
- ASTM D3767-03(2008) Rubber—Measurement of Dimensions
- ASTM D3773/D3773M-10 Length of Woven Fabric
- ASTM D3775-08 Fabric Count of Woven Fabric
- ASTM D3776 / D3776M-09ae2 Mass Per Unit Area (Weight) of Fabric
- ASTM D3786/D3786M-13 Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
- ASTM D3828-09 Flash Point by Small Scale Closed Cup Tester
- ASTM D3839-14 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
- ASTM D3841-97(2008)e1 Glass-Fiber-Reinforced Polyester Plastic Panels
- ASTM D3884-09(2013)e1 Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
- ASTM D3895-07 Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D3910-15 Design, Testing, and Construction of Slurry Seal
- ASTM D3914-02(2008) In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
- ASTM D3915-06 (Withdrawn* 2015, No Repl) Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
- ASTM D3916-08 Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
- ASTM D3917-15a Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
- ASTM D3931-08(2015) Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D395-03(2008) Rubber Property-Compression Set
- ASTM D3960-05(2013) Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
- ASTM D3963/D3963M-93 Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
- ASTM D3965-11 Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
- ASTM D3966-07 Deep Foundations Under Lateral Load
- ASTM D3977-97(2013)e1 Determining Sediment Concentration in Water Samples
- ASTM D3999-11 Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
- ASTM D4000-12 Standard Classification System for Specifying Plastic Materials
- ASTM D4014-03(2012) Plain and Steel-Laminated Elastomeric Bearings for Bridges
- ASTM D4017-02(2008)e1 Water in Paints and Paint Materials by Karl Fischer Method
- ASTM D402-14 Distillation of Cut-Back Asphaltic (Bituminous) Products
- ASTM D402/D402M Distillation of Cutback Asphalt
- ASTM D4052-11 Density and Relative Density of Liquids by Digital Density Meter
- ASTM D4060-14 Abrasion Resistance of Organic Coatings by the Taber Abraser
- ASTM D4061-94(2006) Retroreflectance of Horizontal Coatings
- ASTM D4065-06 Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
- ASTM D4066-01a(2008) Standard Classification System for Nylon Injection and Extrusion Materials (PA)
- ASTM D4070-15 Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
- ASTM D4097-01(2010) Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
- ASTM D41/D41M-11 Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM D4101-14 Polypropylene Injection and Extrusion Materials
- ASTM D412-06ae2(2013) Vulcanized Rubber and Thermoplastic Elastomers—Tension
- ASTM D4123-82(1995) (Withdrawn 2003*) Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003)
- ASTM D4125/D4125M-10 Asphalt Content of Bituminous Mixtures by the Nuclear Method
- ASTM D413-98(2007) Rubber Property - Adhesion to Flexible Substrate
- ASTM D4142-89(2009) Testing Epoxy Resins
- ASTM D4145-10 Coating Flexibility of Prepainted Sheet
- ASTM D4161-14 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
- ASTM D4182-97(2004) (Withdrawn 2010*) Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal
- ASTM D4214-07(2015) Evaluating the Degree of Chalking of Exterior Paint Films
- ASTM D4215-07(2013) Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
- ASTM D4216-13 Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds
- ASTM D4218-96(2008) Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
- ASTM D4219-08 Unconfined Compressive Strength Index of Chemical-Grouted Soils
- ASTM D422-63(2007)e1 Particle-Size Analysis of Soils
- ASTM D4226-11 Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
- ASTM D4238-90 (Withdrawn 1996*) Electrostatic Propensity of Textiles (Withdrawn 1996)
- ASTM D4258-05(2012) Standard Practice for Surface Cleaning Concrete for Coating
- ASTM D4263-83(2012) Indicating Moisture in Concrete by the Plastic Sheet Method
- ASTM D4280-15 Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
- ASTM D4285-83(R2006) Indicating Oil or Water in Compressed Air
- ASTM D429-08 Rubber Property-Adhesion to Rigid Substrates
- ASTM D43-00(2012)e1 Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
- ASTM D4317-98(2011) Polyvinyl Acetate-Based Emulsion Adhesives
- ASTM D4318-10e1 Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- ASTM D4354-12 Sampling of Geosynthetics for Testing
- ASTM D4355-07 Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
- ASTM D4355/D4355M-14 Deterioration of Geotextiles from Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
- ASTM D4380-12 Density of Bentonitic Slurries
- ASTM D4383-12 Plowable, Raised Retroreflective Pavement Markers
- ASTM D4385-13 Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
- ASTM D4389/D4389M-04(2010)e1 Finished Glass Fabrics Woven From Rovings
- ASTM D4396-06 (Withdrawn* 2015, No Repl) Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
- ASTM D4397-10 Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
- ASTM D4400-99(2012)e1 Sag Resistance of Paints Using a Multinotch Applicator
- ASTM D4402/D4402M-15 Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
- ASTM D4417-14 Field Measurement of Surface Profile of Blast Cleaned Steel
- ASTM D4434 / D4434M-12 Poly(Vinyl Chloride) Sheet Roofing
- ASTM D4435-13e1 Rock Bolt Anchor Pull Test
- ASTM D4439-15 Standard Terminology for Geosynthetics
- ASTM D445-12 Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
- ASTM D4451-02(2008) Pigment Content of Paints by Low-Temperature Ashing
- ASTM D4475-02(2008) Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method
- ASTM D4476/D4476M-14 Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
- ASTM D4479 / D4479M-07(2012)e1 Asphalt Roof Coatings—Asbestos-Free
- ASTM D448-12 Sizes of Aggregate for Road and Bridge Construction
- ASTM D449-03(2014)e1 Asphalt Used in Dampproofing and Waterproofing
- ASTM D4491/D4491M-15 Water Permeability of Geotextiles by Permittivity
- ASTM D450-12 Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
- ASTM D4505-12 Preformed Plastic Pavement Marking Tape for Extended Service Life
- ASTM D4508-10 Chip Impact Strength of Plastics
- ASTM D4530-11 Determination of Carbon Residue (Micro Method)
- ASTM D4533-11 Trapezoid Tearing Strength of Geotextiles
- ASTM D4541-09e1 Pull-Off Strength of Coatings Using Portable Adhesion Testers
- ASTM D4580/D4580M-12 Measuring Delaminations in Concrete Bridge Decks by Sounding
- ASTM D4585/D4585M-13 Testing Water Resistance of Coatings Using Controlled Condensation
- ASTM D4586-07(2012)e1 Asphalt Roof Cement, Asbestos-Free
- ASTM D4587-11 Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- ASTM D4592-12 Preformed Plastic Pavement Marking Tape for Limited Service Life
- ASTM D4594-96(2015)e1 Effects of Temperature on Stability of Geotextiles
- ASTM D4595-11 Tensile Properties of Geotextiles by the Wide-Width Strip Method
- ASTM D4632/D4632M-15a Grab Breaking Load and Elongation of Geotextiles
- ASTM D4643-08 Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
- ASTM D4707-09 Measuring Paint Spatter Resistance to Roller Application
- ASTM D4708-12 Preparation of Uniform Free Films of Organic Coatings
- ASTM D471-12 Rubber Property-Effect of Liquids
- ASTM D4716/D4716M-14 Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
- ASTM D4719-07 Prebored Pressuremeter Testing in Soils
- ASTM D4737-10 Calculated Cetane Index by Four Variable Equation
- ASTM D4751-12 Determining Apparent Opening Size of a Geotextile
- ASTM D4758-92(1998) (Withdrawn*, No Replacement) Nonvolatile Content of Latexes (Withdrawn 2007)
- ASTM D4759-11 Determining the Specification Conformance of Geosynthetics
- ASTM D4761-13 Mechanical Properties of Lumber and Wood-Base Structural Material
- ASTM D4762-11a Testing Polymer Matrix Composite Materials
- ASTM D4767-11 Consolidated Undrained Triaxial Compression Test for Cohesive Soils
- ASTM D4788-03(2013) Detecting Delaminations in Bridge Decks Using Infrared Thermography
- ASTM D4791-01 Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-10 Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4792/D4792M-13 Potential Expansion of Aggregates from Hydration Reactions
- ASTM D4796-10 Bond Strength of Thermoplastic Traffic Marking Materials
- ASTM D4797-12a Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
- ASTM D4812-11 Unnotched Cantilever Beam Impact Strength of Plastics
- ASTM D482-07 Ash from Petroleum Products
- ASTM D4829-11 Expansion Index of Soils
- ASTM D4832-10 Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
- ASTM D4833/D4833M-07(2013)e1 Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
- ASTM D4866/D4866M-88(2011)e1 Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
- ASTM D4867/D4867M-09(2014) Effect of Moisture on Asphalt Concrete Paving Mixtures
- ASTM D4873-15 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls
- ASTM D4884/D4884M-14a Strength of Sewn or Thermally Bonded Seams of Geotextiles
- ASTM D4885-01(2011) Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
- ASTM D4886-10 Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
- ASTM D4894-07(2012) (Replaces D1457) Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
- ASTM D4895-10 (Replaces D1457) Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
- ASTM D4940-10 Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
- ASTM D4956-13 Retroreflective Sheeting for Traffic Control
- ASTM D4960-08(2013) Evaluation of Color for Thermoplastic Traffic Marking Materials
- ASTM D4972-13 pH of Soils
- ASTM D4976-12 Polyethylene Plastics Molding and Extrusion Materials
- ASTM D4990-97a(2005)e1 Coal Tar Glass Felt Used in Roofing and Waterproofing
- ASTM D4992-14e1 Standard Practice for Evaluation of Rock to be Used for Erosion Control
- ASTM D5-06e1 Penetration of Bituminous Materials
- ASTM D5/D5M-13 Penetration of Bituminous Materials
- ASTM D5028-09 Curing Properties of Pultrusion Resins by Thermal Analysis
- ASTM D5033-00 (Withdrawn 2007*) The Development of Standards Relating to the Proper Use of Recycled Plastics
- ASTM D5034-09 Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D5035-11(2015) Breaking Force and Elongation of Textile Fabrics (Strip Method)
- ASTM D5040-90(2011) Ash Content of Adhesives
- ASTM D5064-07(2012) Conducting a Patch Test to Assess Coating Compatibility
- ASTM D5078/D5078M-11 Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
- ASTM D5084-10 Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
- ASTM D5095-91(2013) Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
- ASTM D5101-12 Measuring the Filtration Compatibility of Soil-Geotextile Systems
- ASTM D5106-15 Steel Slag Aggregates for Bituminous Paving Mixtures
- ASTM D5112-98(2009) Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
- ASTM D5117-09 Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
- ASTM D5141-11 Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
- ASTM D5147/D5147M-14 Sampling and Testing Modified Bituminous Sheet Material
- ASTM D5167-13 Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
- ASTM D518-99 (Withdrawn 2008*) Rubber Deterioration-Surface Cracking
- ASTM D5199-12 Measuring Nominal Thickness of Geotextiles and Geomembranes
- ASTM D520-00(2011) Zinc Dust Pigment
- ASTM D5201-05a(2010) Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
- ASTM D522/D522M-13 Mandrel Bend Test of Attached Organic Coatings
- ASTM D5229/D5229M-14 Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
- ASTM D523-14 Specular Gloss
- ASTM D5249-10 Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
- ASTM D5261-10 Measuring Mass per Unit Area of Geotextiles
- ASTM D5262-07(2012) (supercedes GRI-GG3-90) Evaluating the Unconfined Tension Creep Behavior of Geosynthetics
- ASTM D5268-13 Topsoil Used for Landscaping Purposes
- ASTM D5271-02 (Withdrawn 2011*) Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
- ASTM D529 (1996) Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
- ASTM D5295/D5295M-14 Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
- ASTM D5321/D5321M-14 Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
- ASTM D5324-10 Testing Water-Borne Architectural Coatings
- ASTM D5329-09 Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
- ASTM D5334-08 Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
- ASTM D5338-11 Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
- ASTM D5360-09 Design and Construction of Bituminous Surface Treatments
- ASTM D5363-03(2008) Anaerobic Single-Component Adhesives (AN)
- ASTM D5385/D5385M-93(2014)e1 Hydrostatic Pressure Resistance of Waterproofing Membranes
- ASTM D5397-07(2012) Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- ASTM D541-87 (Withdrawn 1996*) Single Jute Yarn
- ASTM D542-14 Index of Refraction of Transparent Organic Plastics
- ASTM D5420-10 Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
- ASTM D543-06 Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D545-14 Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
- ASTM D5453-09 Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
- ASTM D546-10 Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
- ASTM D5475-93(2002) (Withdrawn 2011*) Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector
- ASTM D5493-06(2011) Permittivity of Geotextiles Under Load
- ASTM D5494-93(2011) Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
- ASTM D5514/D5514M-14 Large Scale Hydrostatic Puncture Testing of Geosynthetics
- ASTM D5539-13 Seed Starter Mix
- ASTM D5546-09 Solubility of Asphalt Binders in Toluene by Centrifuge
- ASTM D5607-08 Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
- ASTM D5617-04(2015) Multi-Axial Tension Test for Geosynthetics
- ASTM D562-10 Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer Viscometer
- ASTM D5628-10 Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
- ASTM D5648-01(2014) Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
- ASTM D5685-11 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
- ASTM D570-98(2010)e1 Water Absorption of Plastics
- ASTM D573-04(2010) Rubber-Deterioration in an Air Oven
- ASTM D575-91(2012) Rubber Properties in Compression
- ASTM D5798-11 Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
- ASTM D5801-12 Toughness and Tenacity of Bituminous Materials
- ASTM D5813-04(2012) Cured-In-Place Thermosetting Resin Sewer Piping Systems
- ASTM D5818-11 Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage
- ASTM D5821-01 (2006) Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-13 Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5860-95(2013) Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
- ASTM D5868-01(2014) Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
- ASTM D5869-07a Dark Oven Heat Exposure of Roofing and Waterproofing Materials
- ASTM D5884-04A(2015)e1 Determining Tearing Strength of Internally Reinforced Geomembranes
- ASTM D5887-09 Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
- ASTM D5890-11 Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
- ASTM D5891-02(2009) Fluid Loss of Clay Component of Geosynthetic Clay Liners
- ASTM D5893/D5893M-10 Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
- ASTM D5894-10 Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM D5918-13 Frost Heave and Thaw Weakening Susceptibility of Soils
- ASTM D5926-15 Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- ASTM D5930-09 Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
- ASTM D5947-06 Physical Dimensions of Solid Plastics Specimens
- ASTM D5970-09 Deterioration of Geotextiles from Outdoor Exposure
- ASTM D5971/D5971M-13 Sampling Freshly Mixed Controlled Low-Strength Material
- ASTM D5973-97(2012) Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
- ASTM D5977-15 High Load Rotational Spherical Bearings for Bridges and Structures
- ASTM D5993-14 Measuring Mass Per Unit of Geosynthetic Clay Liners
- ASTM D5994/D5994M-10(2015)e1 Measuring Core Thickness of Textured Geomembranes
- ASTM D6023-07 Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
- ASTM D6024/MD6024-15 Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
- ASTM D6040-06 Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
- ASTM D605-82(2007) Magnesium Silicate Pigment (Talc)
- ASTM D6070-02(2010) Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
- ASTM D6079-11 Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
- ASTM D6084-06 Elastic Recovery of Bituminuous Materials by Ductilometer
- ASTM D6087 Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
- ASTM D6088-06(2011) Installation of Geocomposite Pavement Drains
- ASTM D609-00(2012) Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
- ASTM D610-08(2012) Evaluating Degree of Rusting on Painted Steel Surfaces
- ASTM D6103-04 (Withdrawn 2013) Flow Consistency of Controlled Low Strength Material (CLSM)
- ASTM D611-07 Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
- ASTM D6114 / D6114M-09 Asphalt-Rubber Binder
- ASTM D6134-07(2013) Vulcanized Rubber Sheets Used in Waterproofing Systems
- ASTM D6140-00(2014) Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
- ASTM D6153-15 Materials for Bridge Deck Waterproofing Membrane Systems
- ASTM D6155-15 Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
- ASTM D6164/D6164M-11 Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- ASTM D618-08 Conditioning Plastics for Testing
- ASTM D621-64(1988) (Withdrawn 1994*) Deformation of Plastics Under Load
- ASTM D6213-97(2009) Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
- ASTM D624-00(2012) Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
- ASTM D6241-04 Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
- ASTM D6244-06(2011) Vertical Compression of Geocomposite Pavement Panel Drains
- ASTM D626-55 (Withdrawn 1968*) Fire-Retardant Properties of Treated Textile Fabrics (Withdrawn 1968)
- ASTM D6270-08e1 Use of Scrap Tires in Civil Engineering Applications
- ASTM D6297-13 Asphaltic Plug Joints for Bridges
- ASTM D6307-10 Asphalt Content of Hot-Mix Asphalt by Ignition Method
- ASTM D632-12 (Reinstated 2012) Sodium Chloride
- ASTM D635-10 Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
- ASTM D6359-99 (Withdrawn 2006*, Replaced by D7585) Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments
- ASTM D6372-15 Design, Testing, and Construction of Micro-Surfacing
- ASTM D6373-15 Performance Graded Asphalt Binder
- ASTM D638-14 Tensile Properties of Plastics
- ASTM D6386-10 Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
- ASTM D639-81(1985) (Withdrawn 1987*) Battery Containers Made from Hard Rubber or Equivalent Materials (Withdrawn 1987)
- ASTM D6390-11 Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
- ASTM D6454-99(2011) Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
- ASTM D6455-11 Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
- ASTM D6459-11 Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
- ASTM D6460-12 Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
- ASTM D6461-99(2007)e2 Silt Fence Materials
- ASTM D6462-03(2008) Silt Fence Installation
- ASTM D6475-06 (Withdrawn* 2015, No Repl) Measuring Mass Per Unit Area of Erosion Control Blankets
- ASTM D648-07 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- ASTM D6489-99(2012) Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
- ASTM D6495/MD6495-15 Acceptance Testing Requirements for Geosynthetic Clay Liners
- ASTM D6497/D6497M-02(2015)e1 Mechanical Attachment of Geomembrane to Penetrations or Structures
- ASTM D6506-01(2009) Asphalt Based Protection for Below-Grade Waterproofing
- ASTM D651-84 (Withdrawn 1989*) Tensile Strength of Molded Electrical Insulating Materials
- ASTM D6524-00(2011) Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
- ASTM D6525/D6525M-14 Measuring Nominal Thickness of Rolled Erosion Control Products
- ASTM D653-11 Standard Terminology Relating to Soil, Rock, and Contained Fluids
- ASTM D6566-14 Measuring Mass per Unit Area of Turf Reinforcement Mats
- ASTM D6567-00(2014) Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
- ASTM D6575-14a Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM's)
- ASTM D6578/D6578M-13 Determination of Graffiti Resistance
- ASTM D6599-00(2014)e1 Construction of Live Fascines on Slopes
- ASTM D660-93(2011) Evaluating Degree of Checking of Exterior Paints
- ASTM D661-93(2011) Evaluating Degree of Cracking of Exterior Paints
- ASTM D6622-01(2009) Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
- ASTM D6628-03(2010)e1 Color of Pavement Marking Materials
- ASTM D6636-01(2011) Determination of Ply Adhesion Strength of Reinforced Geomembranes
- ASTM D6637-15 Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
- ASTM D6638-11 Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
- ASTM D6648-08 Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- ASTM D6662-09 Polyolefin-Based Plastic Lumber Decking Boards
- ASTM D668-99(2004) Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
- ASTM D6684-04(2010) Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
- ASTM D6690-01 Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
- ASTM D6693/D6693M-04(2015e1) Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
- ASTM D6704-08(2015) Determining the Workability of Asphalt Cold Mix Patching Material
- ASTM D6706-01(2013) Measuring Geosynthetic Pullout Resistance in Soil
- ASTM D6707-06(2011) Circular-Knit Geotextile for Use in Subsurface Drainage Applications
- ASTM D671-93 (Withdrawn 2002*) Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (Withdrawn 2002)
- ASTM D6711-15 Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
- ASTM D6752-03 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
- ASTM D6752/D6752M-11 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
- ASTM D6757-07 Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
- ASTM D6767-14 Pore Size Characteristics of Geotextiles by Capillary Flow Test
- ASTM D6768-04(2015)e2 Tensile Strength of Geosynthetic Clay Liners
- ASTM D6769/D6769M-02(2010)e1 Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
- ASTM D6783-05(2011) Polymer Concrete Pipe
- ASTM D6797-07(2011) Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
- ASTM D6816-11 Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
- ASTM D6817/D6817M-15 Rigid Cellular Polystyrene Geofoam
- ASTM D6818-14 Ultimate Tensile Properties of Turf Reinforcement Mats
- ASTM D6837-10 Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
- ASTM D6838-04(2010) Cummins M11 High Soot Test
- ASTM D6884-03(2010) Installation of Articulating Concrete Block (ACB) Revetment Systems
- ASTM D6894-11 Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
- ASTM D6904-03(2007) Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
- ASTM D6916-06c(2011) Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
- ASTM D692/D692M-15 Coarse Aggregate for Bituminous Paving Mixtures
- ASTM D6924-03(2012) Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
- ASTM D6925-15 Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
- ASTM D6926-10 Preparation of Bituminous Specimens Using Marshall Apparatus
- ASTM D6927 Marshall Stability and Flow of Asphalt Mixtures
- ASTM D6928-10 Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
- ASTM D6929-10 Freezing of Emulsified Asphalts
- ASTM D6930-10 Settlement and Storage Stability of Emulsified Asphalts
- ASTM D6931-12 Indirect Tensile (IDT) Strength of Bituminous Mixtures
- ASTM D6932/D6932M-08 Materials and Construction of Open-Graded Friction Course Plant Mixtures
- ASTM D6933-13 Oversized Particles in Emulsified Asphalts (Sieve Test)
- ASTM D6934-08 Residue by Evaporation of Emulsified Asphalt
- ASTM D6935-11 Determining Cement Mixing of Emulsified Asphalt
- ASTM D6936-09 Determining Demulsibility of Emulsified Asphalt
- ASTM D6937-08 Determining Density of Emulsified Asphalt
- ASTM D6938-10 In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- ASTM D6944-15 Resistance of Cured Coatings to Thermal Cycling
- ASTM D6946/D6946M-13e1 Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
- ASTM D6947-07(2013) Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
- ASTM D695-15 Compressive Properties of Rigid Plastics
- ASTM D6954-04(2013) Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
- ASTM D696-08e1 Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C
- ASTM D698-12e1 Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
- ASTM D6992-03(2015) Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
- ASTM D6997 Distillation of Emulsified Asphalt
- ASTM D6997-12 Distillation of Emulsified Asphalt
- ASTM D6998-11 Evaluating Aggregate Coating using Emulsified Asphalts
- ASTM D70-09e1 Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
- ASTM D7001-06(2011) Geocomposites for Pavement Edge Drains and Other High-Flow Applications
- ASTM D7003-03(2008) Strip Tensile Properties of Reinforced Geomembranes
- ASTM D7004-03(2013)e1 Grab Tensile Properties of Reinforced Geomembranes
- ASTM D7005/D7005M-15 Determining the Bond Strength (Ply Adhesion) of Geocomposites
- ASTM D7006-03(2013) Ultrasonic Testing of Geomembranes
- ASTM D7014-10 Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
- ASTM D7032-10a Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
- ASTM D7056-07(2012) Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
- ASTM D7063/D7063M-11 Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
- ASTM D7064/D7064M-08e1 Open-Graded Friction Course (OGFC) Mix Design
- ASTM D7082-15 Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
- ASTM D7089-06(2014) Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
- ASTM D7091-13 Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non Ferrous Metals
- ASTM D7101-13 Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
- ASTM D711-10(2015) No-Pick-Up Time of Traffic Paint
- ASTM D7113/D7113M-10 Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
- ASTM D713-12 Conducting Road Service Tests on Fluid Traffic Marking Materials
- ASTM D714-02(2009) Evaluating Degree of Blistering of Paints
- ASTM D7158-11 Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)
- ASTM D7174-05(2011) Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM D7175-15 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7176-06(2011) Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
- ASTM D7180/D7180M-05(2013)e1 Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
- ASTM D7205/D7205M-06(2011) Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
- ASTM D7207-05 (Withdrawn 2014) Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
- ASTM D7208-14 Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
- ASTM D7226-13 Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
- ASTM D7229-08(2013)e1 Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
- ASTM D7238-06(2012) Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D7239-13 Hybrid Geosynthetic Paving Mat for Highway Applications
- ASTM D7247-07ae1 Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM D7258-14 Polymeric Piles
- ASTM D7273-08(2013)e1 Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
- ASTM D7275-07(2012) Tensile Properties of Bituminous Geomembranes (BGM)
- ASTM D7276-08 Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
- ASTM D7281-07 Determining Water Migration Resistance Through Roof Membranes
- ASTM D7307-06(2011) Sampling of Thermoplastic Traffic Marking Materials
- ASTM D7308-07(2012) Sample Preparation of Thermoplastic Traffic Marking Materials
- ASTM D7312-10 Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
- ASTM D732-10 Shear Strength of Plastics by Punch Tool
- ASTM D7322-13a Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
- ASTM D7336/D7336M-12 Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
- ASTM D7337/D7337M-12 Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
- ASTM D7343-12 Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
- ASTM D7349-11 Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
- ASTM D7351-13 Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
- ASTM D7357-07(2012) Cellulose Fibers for Fiber-Reinforced Concrete
- ASTM D7367-14 Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
- ASTM D7369-11 Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
- ASTM D7377-09 Evaluating the Water Wash-Off Resistance of Traffic Paints
- ASTM D7378-10 Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
- ASTM D7380-08 Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
- ASTM D7382-08 Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
- ASTM D7396-08 Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
- ASTM D7406-07(2012) Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
- ASTM D746-14 Brittleness Temperature of Plastics and Elastomers by Impact
- ASTM D7460-10 Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
- ASTM D7466/D7466M-10(2015)e1 Measuring the Asperity Height of Textured Geomembrane
- ASTM D747-10 Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM D7498/D7498M-09(2014)e1 Vertical Strip Drains Using a Large Scale Consolidation Test
- ASTM D75-09 Sampling Aggregates
- ASTM D7508/D7508M-10(2015) Polyolefin Chopped Strands for Use in Concrete
- ASTM D7522/D7522M-15 Pull-Off Strength for FRP Bonded to Concrete Substrate
- ASTM D7539-10(2015) Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- ASTM D7556-10 Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
- ASTM D7557/D7557M-09(2013)e1 Sampling of Expanded Polystyrene Geofoam Specimens
- ASTM D7565/D7565M-10 Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
- ASTM D7568-13 Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
- ASTM D7585/D7585M-10 Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
- ASTM D7613-10 Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
- ASTM D7616/D7616M-11 Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
- ASTM D7617/D7617M-11 Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
- ASTM D7643-10 Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
- ASTM D7693/D7693M-15 Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
- ASTM D7698-11a In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
- ASTM D7701-11 Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
- ASTM D7705/D7705M-12 Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
- ASTM D772-86(2011) Evaluating Degree of Flaking (Scaling) of Exterior Paints
- ASTM D7735-11e1 Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
- ASTM D7744/D7744M-11 Tensile Testing of High Performance Polyethylene Tapes
- ASTM D7748/D7748M-14 Flexural Rigidity of Geogrids, Geotextiles and Related Products
- ASTM D775-80(1986) (Withdrawn 1993) Method for Drop Test for Loaded Boxes (Withdrawn 1993)
- ASTM D7762-11 Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
- ASTM D7792/D7792M-15 Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
- ASTM D7803-12 Standard Practice for Preparation of Zinc (Hot Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
- ASTM D784-08 Orange Shellac and Other Indian Lacs for Electrical Insulation
- ASTM D785-08 Rockwell Hardness of Plastics and Electrical Insulating Materials
- ASTM D7853-13 Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
- ASTM D790-10 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- ASTM D7906-14 Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
- ASTM D7913/D7913M-14 Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
- ASTM D7914/D7914M-14 Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM D792-08 Density and Specific Gravity (Relative Density) of Plastics by Displacement
- ASTM D7942-15 Thermoplastic Pavement Markings in Non Snow Plow Areas
- ASTM D7986-15 Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
- ASTM D7992/D7992M-15 Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
- ASTM D8-13b Standard Terminology Relating to Materials for Roads and Pavements
- ASTM D8008 Standard Practice for Representative Field Sampling of Traffic Paints
- ASTM D803-15 Testing Tall Oil
- ASTM D806-11 Cement Content of Hardened Soil-Cement Mixtures
- ASTM D822-01(2006) Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
- ASTM D832-07 Rubber Conditioning For Low Temperature Testing
- ASTM D854-10 Specific Gravity of Soil Solids by Water Pycnometer
- ASTM D86-11b Distillation of Petroleum Products at Atmospheric Pressure
- ASTM D868-10(2015) Determination of Degree of Bleeding of Traffic Paint
- ASTM D869-85(2011) Evaluating Degree of Settling of Paint
- ASTM D870-15 Testing Water Resistance of Coatings Using Water Immersion
- ASTM D876-09 Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
- ASTM D882-10 Tensile Properties of Thin Plastic Sheeting
- ASTM D883-11 Standard Terminology Relating to Plastics
- ASTM D891-09 Specific Gravity, Apparent, of Liquid Industrial Chemicals
- ASTM D903-98(2010) Peel or Stripping Strength of Adhesive Bonds
- ASTM D913-10 Evaluating Degree of Traffic Paint Line Wear
- ASTM D92-12 Flash and Fire Points by Cleveland Open Cup
- ASTM D926-08 Rubber Property—Plasticity and Recovery (Parallel Plate Method)
- ASTM D937-07 Cone Penetration of Petrolatum
- ASTM D946-09a Penetration-Graded Asphalt Cement for Use in Pavement Construction
- ASTM D95-05(2010) Water in Petroleum Products and Bituminous Materials by Distillation
- ASTM D953-10 Bearing Strength of Plastics
- ASTM D955-08 Measuring Shrinkage from Mold Dimensions of Thermoplastics
- ASTM D962-81(2008)e1 Aluminum Powder and Paste Pigments for Paints
- ASTM D968-05(2010) Abrasion Resistance of Organic Coatings by Falling Abrasive
- ASTM D969-85(2003)e1 Laboratory Determination of Degree of Bleeding of Traffic Paint
- ASTM D97-11 Pour Point of Petroleum Products
- ASTM D977-13e1 Emulsified Asphalt
- ASTM D98-15 Calcium Chloride
- ASTM D994/D994M-11 Preformed Expansion Joint Filler for Concrete (Bituminous Type)
- ASTM E10-15 Brinell Hardness of Metallic Materials
- ASTM E104-02(2007) Maintaining Constant Relative Humidity by Means of Aqueous Solutions
- ASTM E108-11 Fire Tests of Roof Coverings
- ASTM E11-09e1 Wire Cloth and Sieves for Testing
- ASTM E1131-08 Compositional Analysis by Thermogravimetry
- ASTM E1132-06 Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
- ASTM E1142-11b Standard Terminology Relating to Thermophysical Properties
- ASTM E1164-12 Obtaining Spectrophotometric Data for Object-Color Evaluation
- ASTM E119-12 Fire Tests of Building Construction and Materials
- ASTM E1247-03 Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
- ASTM E1252-98(2007) General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
- ASTM E1260-03(2009) Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
- ASTM E1274-03(2012) Measuring Pavement Roughness Using a Profilograph
- ASTM E1318-09 Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
- ASTM E1332-10a Determination of Outdoor-Indoor Transmission Class
- ASTM E1337-90(2012) Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
- ASTM E1347-06(2011) (Replaces E97) Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
- ASTM E1349-06 Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
- ASTM E1356-08 Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E136-12 Behavior of Materials in a Vertical Tube Furnace at 750°C
- ASTM E1433-04 (Withdrawn 2010*, No Replacement) Selection of Standards on Environmental Acoustics
- ASTM E1512-01(2007) Testing Bond Performance of Adhesive-Bonded Anchors
- ASTM E154-08a(2013)e1 Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
- ASTM E155-10 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
- ASTM E162-12a Surface Flammability of Materials Using a Radiant Heat Energy Source
- ASTM E1640-13 Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E1642-00(2010) General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
- ASTM E1643-11 Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
- ASTM E1686-10 Selection of Environmental Noise Measurements and Criteria
- ASTM E1703/E1703M-10 Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
- ASTM E1709-09 Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
- ASTM E171-11 Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
- ASTM E1710-11 Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
- ASTM E1745-11 Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
- ASTM E177-10 Use of the Terms Precision and Bias in ASTM Test Methods
- ASTM E178-08 Dealing with Outlying Observations
- ASTM E1795-12 Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- ASTM E1859/E1859M-11e1 Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
- ASTM E1911-09ae1 Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
- ASTM E1966-07(2011) Fire-Resistive Joint Systems
- ASTM E2030-09a Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
- ASTM E2072-14 Photoluminescent (Phosphorescent) Safety Markings
- ASTM E2073-10 Photopic Luminance of Photoluminescent (Phosphorescent) Markings
- ASTM E2152-01(2006) Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
- ASTM E2153-01(2011) Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
- ASTM E2176-08 (Withdrawn 2013*, Replaced by E2832) Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting
- ASTM E2177-11 Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
- ASTM E2202-02(2009) Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
- ASTM E228-11 Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
- ASTM E23-07ae1 Notched Bar Impact Testing of Metallic Materials
- ASTM E2300-09 Highway Traffic Monitoring Devices
- ASTM E2301-12) Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
- ASTM E2340/E2340M-11e1 Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
- ASTM E2366-05 (Withdrawn* Feb 2014) Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
- ASTM E2367-05(2014) Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
- ASTM E2380/E2380M-09 Measuring Pavement Texture Drainage Using an Outflow Meter
- ASTM E2430-05 Expanded Polystyrene ( x201C;EPS x201D;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems ( x201C;EIFS x201D;)
- ASTM E2532-09 Evaluating Performance of Highway Traffic Monitoring Devices
- ASTM E2560-13 Data Format for Pavement Profile
- ASTM E2561-07a(2012) Installation of Inductive Loop Detectors
- ASTM E2665-08 Archiving ITS-Generated Traffic Monitoring Data
- ASTM E2714-09e1 Creep-Fatigue Testing
- ASTM E274/E274M-11 Skid Resistance of Paved Surfaces Using a Full-Scale Tire
- ASTM E28-14 Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
- ASTM E283-04(2012) Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
- ASTM E2832-12 Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
- ASTM E284-12 Standard Terminology of Appearance
- ASTM E2899-15 Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
- ASTM E29-08 Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E298-08 Assay of Organic Peroxides
- ASTM E303-93(2008) Measuring Surface Frictional Properties Using the British Pendulum Tester
- ASTM E308-08 Computing the Colors of Objects by Using the CIE System
- ASTM E313-10 Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
- ASTM E328-13 Stress Relaxation Tests for Materials and Structures
- ASTM E329-11c Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- ASTM E330-02(2010) Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E331-00(2009) Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
- ASTM E336-11 Measurement of Airborne Sound Attenuation between Rooms in Buildings
- ASTM E386-90(2011) Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
- ASTM E4-10 Force Verification of Testing Machines
- ASTM E413-10 Classification for Rating Sound Insulation
- ASTM E449-08(2013) Analysis of Calcium Chloride
- ASTM E477-06a Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- ASTM E488/E488M-10 Strength of Anchors in Concrete and Masonry Elements
- ASTM E514/E514M-14a Water Penetration and Leakage Through Masonry
- ASTM E534-13 Chemical Analysis of Sodium Chloride
- ASTM E629-96 (Withdrawn*) Field Evaluation of Nematode Control Agents-Determination of Nematode Population Responses to Control Agents (Withdrawn 1996)
- ASTM E70-07 pH of Aqueous Solutions With the Glass Electrode
- ASTM E72-10 Conducting Strength Tests of Panels for Building Construction
- ASTM E740/E740M-03(2010)e1 Fracture Testing with Surface-Crack Tension Specimens
- ASTM E795-05 Mounting Test Specimens During Sound Absorption Tests
- ASTM E8/E8M-15a Tension Testing of Metallic Materials
- ASTM E800-07 Measurement of Gases Present or Generated During Fires
- ASTM E808-01(2009) Describing Retroreflection
- ASTM E809-08(2013) Measuring Photometric Characteristics of Retroreflectors
- ASTM E810-03(2008) Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
- ASTM E811-09 Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
- ASTM E831-12 Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E84-12a Surface Burning Characteristics of Building Materials
- ASTM E90-09 Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- ASTM E903-96 (Withdrawn 2005*) Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
- ASTM E950/E950M-09 Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
- ASTM E96/E96M-15 Water Vapor Transmission of Materials
- ASTM E965-96(2006) Measuring Pavement Macrotexture Depth Using a Volumetric Technique
- ASTM E97-82 (Withdrawn 1991*, Replaced By E1347) Directional Reflectance Factor, 45-deg 0-deg, of Opaque Specimens by Broad-Band Filter Reflectometry
- ASTM E976-10 Determining the Reproducibility of Acoustic Emission Sensor Response
- ASTM E991-11 Color Measurement of Fluorescent Specimens
- ASTM F1043-14 Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
- ASTM F1055-13 Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
- ASTM F1057-10 Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
- ASTM F1083-13 Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
- ASTM F1216-09 Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
- ASTM F1249-06(2011) Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
- ASTM F1267-12 Metal, Expanded, Steel
- ASTM F1281-11 Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
- ASTM F1282-10 Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
- ASTM F1292-09 Impact Attenuation of Surface Systems Under and Around Playground Equipment
- ASTM F1336-07 Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
- ASTM F1345-10a(2015) Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
- ASTM F1417-11a(2015) Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
- ASTM F1473-13 Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
- ASTM F1476-07(2013) Performance of Gasketed Mechanical Couplings for Use in Piping Applications
- ASTM F1483-12 Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
- ASTM F1488-09e1 Coextruded Composite Pipe
- ASTM F1504-14 Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
- ASTM F1533-01(2009) Deformed Polyethylene (PE) Liner
- ASTM F1545-15a Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
- ASTM F1553-11 Specifying Chain Link Fence
- ASTM F1554-07ae1 Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
- ASTM F1606-05(2014) Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
- ASTM F1632-03 (2010) Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
- ASTM F1637-10 Standard Practice for Safe Walking Surfaces
- ASTM F1647-11 Organic Matter Content of Athletic Field Rootzone Mixes
- ASTM F1664-08(2013) Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
- ASTM F1665-08(2013) Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
- ASTM F1667-15 Driven Fasteners: Nails, Spikes, and Staples
- ASTM F1668-08 Construction Procedures for Buried Plastic Pipe
- ASTM F1674-05 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
- ASTM F1674-11 Joint restraint products for use with PVC pipe
- ASTM F1675-13 Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
- ASTM F1697-09(2015) Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
- ASTM F1698-02(2015) Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
- ASTM F1732-12 Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
- ASTM F1735-09(2015) Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
- ASTM F1741-08 Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
- ASTM F1743-08 Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
- ASTM F1759-97(2010) Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
- ASTM F1760-01(2011) Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
- ASTM F1803-06 (Withdrawn* Jan 2015) Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
- ASTM F1815-11 Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
- ASTM F1852-14 “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
- ASTM F1865-09 Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
- ASTM F1866-13 Poly (Vinyl Chloride ) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
- ASTM F1867-06(2012) Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
- ASTM F1871-11 Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
- ASTM F1947-10 Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
- ASTM F1960-15 Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
- ASTM F1962-11 Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
- ASTM F1970-12e1 Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
- ASTM F1974-09(2015) Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
- ASTM F2000-10 Fences for Baseball and Softball Fields
- ASTM F2019-11 Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
- ASTM F2023-10 Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
- ASTM F2049-11 Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
- ASTM F2080-15 Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
- ASTM F2098-08 Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
- ASTM F2136-08 Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM F2159-11 Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
- ASTM F2160-10 Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
- ASTM F2164-13 Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
- ASTM F2176-02(2009) Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
- ASTM F2200-14 Automated Vehicular Gate Construction
- ASTM F2206-14 Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
- ASTM F2217/F2217M-13 Coating/Adhesive Weight Determination
- ASTM F2262-09 Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
- ASTM F2263-14 Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
- ASTM F2280-14 “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
- ASTM F2282-03(2015) Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
- ASTM F2304-10 Sealing of Sewers Using Chemical Grouting
- ASTM F2306/F2306M-14e1 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
- ASTM F2329-15 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
- ASTM F2408-11 Ornamental Fences Employing Galvanized Steel Tubular Pickets
- ASTM F2418-13 Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
- ASTM F2433-05(2013) Determining Thermoplastic Pipe Wall Stiffness
- ASTM F2435-15 Steel Reinforced Polyethylene (PE) Corrugated Pipe
- ASTM F2453/F2453M-14 Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in. [3871 mm] or Less, in Panels or Rolls, with Uniform Meshes
- ASTM F2454-05(2010) Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
- ASTM F2482-08(2015) Load-Indicating Externally Threaded Fasteners
- ASTM F2487-13 Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
- ASTM F2510/F2510M-07(2013) Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
- ASTM F2551-09 Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
- ASTM F2561-11 Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
- ASTM F2562/F2562M-15 Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
- ASTM F2599-11 The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
- ASTM F2611-15 Standard Guide for Design and Construction of Chain Link Security Fencing
- ASTM F2618-09(2014) Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
- ASTM F2619/F2619M-13 High-Density Polyethylene (PE) Line Pipe
- ASTM F2620-13 Heat Fusion Joining of Polyethylene Pipe and Fittings
- ASTM F2634-10 Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
- ASTM F2648/F2648M-13 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
- ASTM F2657-07(2012) Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
- ASTM F2658-07(2013) Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
- ASTM F2674-07 (Withdrawn*, Replaced by F2329) Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
- ASTM F2686-14 Glass Fiber Reinforced Thermoplastic Pipe
- ASTM F2688-08(2014) Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
- ASTM F2718-09(2015) Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
- ASTM F2719-09(2015) Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
- ASTM F2720/F2720M-09 Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
- ASTM F2736-13e1 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
- ASTM F2737-11 Corrugated High Density Polyethylene (HDPE) Water Quality Units
- ASTM F2762-11e1 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
- ASTM F2763-11 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
- ASTM F2764/F2764M-11ae2 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
- ASTM F2787-13 Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
- ASTM F2788/F2788M-13 Metric-sized Crosslinked Polyethylene (PEX) Pipe
- ASTM F2817-10 Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
- ASTM F2829-10 Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
- ASTM F2831-12 Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
- ASTM F2832-11 Accelerated Corrosion Testing for Mechanical Fasteners
- ASTM F2833 -11 Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
- ASTM F2854-10 Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
- ASTM F2880-14 Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.
- ASTM F2881-11(2015) 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
- ASTM F2922-13e1 Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- ASTM F2928-13 Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
- ASTM F2946-12 PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
- ASTM F2947-14 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
- ASTM F2969-12 Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
- ASTM F3000/F3000M-13 Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
- ASTM F3123-15 Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
- ASTM F3148-15 High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
- ASTM F355-10a Shock-Absorbing Properties of Playing Surface Systems and Materials
- ASTM F402-05(2012) Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
- ASTM F405-13 Corrugated Polyethylene (PE) Pipe and Fittings
- ASTM F412-12 Plastic Piping Systems
- ASTM F412-15 Standard Terminology Relating to Plastic Piping Systems
- ASTM F436M-11 Hardened Steel Washers [Metric]
- ASTM F437-15 Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
- ASTM F438-15 Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
- ASTM F439-12 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
- ASTM F441/F441M-15 Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
- ASTM F442/F442M-13e1 Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
- ASTM F449-02(2014) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
- ASTM F468-13 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- ASTM F476-84(2002) Security of Swinging Door Assemblies
- ASTM F477-08 Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM F480-14 Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
- ASTM F483-09 Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
- ASTM F493-14 Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
- ASTM F512-12 Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
- ASTM F537-01(2014) Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
- ASTM F541-12 Alloy Steel Eyebolts
- ASTM F552-14 Standard Terminology Relating to Chain Link Fencing
- ASTM F567-14a Installation of Chain-Link Fence
- ASTM F568M-07 (Withdrawn 2012*) Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
- ASTM F585-13 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
- ASTM F593-13a Stainless Steel Bolts, Hex Cap Screws, and Studs
- ASTM F594-09(2015) Stainless Steel Nuts
- ASTM F606/F606M-14a Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
- ASTM F626-14 Fence Fittings
- ASTM F645-15a Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
- ASTM F654-07(2012) Residential Chain Link Fence Gates
- ASTM F656-15 Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
- ASTM F667/F667M-15 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
- ASTM F668-11 Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
- ASTM F679-15 Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
- ASTM F690-86(2003) (Withdrawn 2012*, No Repl) Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
- ASTM F714-13 Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- ASTM F738M-02(2008) Stainless Steel Metric Bolts, Screws, and Studs
- ASTM F758-14 Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
- ASTM F771-99(2005) (Withdrawn* 2014) Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
- ASTM F788/F788M-13 Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
- ASTM F789-95a Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings
- ASTM F794-03(2014) Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
- ASTM F795-88(1993) (Withdrawn 2002*) Determining the Performance of a Filter Medium Employing a Single-Pass, Constant-Rate, Liquid Test
- ASTM F810-07 Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption
- ASTM F835-13 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
- ASTM F836M-02(2010) Style 1 Stainless Steel Metric Nuts
- ASTM F876-15 Crosslinked Polyethylene (PEX) Tubing
- ASTM F877-11a Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
- ASTM F879-12 Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
- ASTM F88-09 Seal Strength of Flexible Barrier Materials
- ASTM F891-10 Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
- ASTM F894-13 Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- ASTM F900-11 Industrial and Commercial Swing Gates
- ASTM F901-01(2012) Aluminum Transmission Tower Bolts and Nuts
- ASTM F905-04(2011) Qualification of Polyethylene Saddle-Fused Joints
- ASTM F913-02(2014) Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- ASTM F934-96(2013) Standard Colors for Polymer-Coated Chain Link Fence Materials
- ASTM F949-15 Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings
- ASTM F959-13 Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
- ASTM F964-13 Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
- ASTM G10-10 Specific Bendability of Pipeline Coatings
- ASTM G109-07(2013) Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
- ASTM G115-10 Measuring and Reporting Friction Coefficients
- ASTM G12-07(2013) Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
- ASTM G14-04(2010)e1 Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM G147-09 Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
- ASTM G151-10 Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G152-06 Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G153-04(2010) Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
- ASTM G154-12a (Replaces G53) Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- ASTM G155-05a Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
- ASTM G162-99(2010) Conducting and Evaluating Laboratory Corrosion Tests in Soils
- ASTM G17-07(2013) Penetration Resistance of Pipeline Coatings (Blunt Rod)
- ASTM G180-13 Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
- ASTM G20-10 Chemical Resistance of Pipeline Coatings
- ASTM G21-13 Determining Resistance of Synthetic Polymeric Materials to Fungi
- ASTM G23-96 (Withdrawn 2000*, Replaced By G152) Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
- ASTM G26-96 (Withdrawn 2000*, Replaced By G155) Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
- ASTM G34-01(2013) Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
- ASTM G48-11 Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- ASTM G51-95(2012) Measuring pH of Soil for Use in Corrosion Testing
- ASTM G53-96 (Withdrawn 2000*, Replaced by G154) Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials (Withdrawn 2000)
- ASTM G62-14 Holiday Detection in Pipeline Coatings
- ASTM G7/G7M-11 Atmospheric Environmental Exposure Testing of Nonmetallic Materials
- ASTM G8-96(2010) Cathodic Disbonding of Pipeline Coatings
- ASTM G85-11 Modified Salt Spray (Fog) Testing
- ASTM G90-10 Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
- ASTM G95-07(2013) Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
- ASTM G97-97(2013) Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
- ASTM International Manual Series - MNL 17-2ND-EB Paint and Coating Testing Manual, 15th Edition 2012 - Joseph V. Koleske - Editor
- ASTM PS131-01 (Withdrawn 2003, Repl by D6752) Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
- Ductile Iron Castings (Grade ...)
- Canadian Standards Association
- Other Standards
American Society for Testing and Materials
>
ASTM International
>
ASTM C109/C109M-13e1 - Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C109/C109M-13e1
Name: | Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
Code: | ASTM C109/C109M-13e1 |
Description: | |
Type: | Test Method |
Version: | |
External References: |
Link to Document |