ADS 100 - 1,500 mm (4 - 60") N-12 Water-Tight (WT) Corrugated HDPE Pipe

Manufactured by ADS Canada
Brand: N-12®

Dual-wall, smooth interior, annular exterior corrugations (open profile pipe), lightweight, polyethylene (PE) pipe, 100-1500 mm (4-60" diameter), 6 m (20 ft) sections, with elastomeric Type 1 (CSA B182.8) watertight gasketed bell/spigot joint and complete line of fabricated fittings and structures.

Categories:

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Polyethylene

Certifications: PMC - Accepted for Use Durham Region Approved Products List City of Hamilton Approved Products List

Prequalification Lists:

Regional Municipality of Durham - 4.72.62.64 - High Density Polyethylene (HDPE) (PDF)

City of Hamilton - 2.05.04 - HDPE (PDF)

Ontario Provincial Standards
- OPSD 806.020 - Height of Fill Table, Dual Wall Corrugated Polyethylene Gravity Sewer Pipe - 320 kPa and RSC 160
- OPSS.MUNI 1840 - Non-Pressure Polyethelene Plastic Pipe Products
- OPSS.MUNI 410 - PIPE SEWER INSTALLATION IN OPEN CUT
- OPSS.MUNI 421 - PIPE CULVERT INSTALLATION IN OPEN CUT
- OPSS.PROV 1840 - Non-Pressure Polyethelene Plastic Pipe Products
- OPSS.PROV 410 - PIPE SEWER INSTALLATION IN OPEN CUT
- OPSS.PROV 421 - PIPE CULVERT INSTALLATION IN OPEN CUT
ASTM International
- ASTM D1238-20 - Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D1693-21 - Environmental Stress-Cracking of Ethylene Plastics
- ASTM D2412-21 - Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- ASTM D2444-21 - Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- ASTM D3350-21 - Polyethylene Plastics Pipe and Fittings Materials
- ASTM D4218-20 - Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
- ASTM F1417-11a (2019) e1 - Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
- ASTM F2487-17e1 - Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
- ASTM F3058-16(2021) - Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
- ASTM F477-(2021) - Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Canadian Standards Association
- CAN/CSA-B182.11 [See B1800]-21 - Standard Practice for the Installation of Thermoplastic Drain, Storm, and Sewer Pipe and Fittings
- CAN/CSA-B182.8 [See B1800]-21 - Profile Polyethylene (PE) Storm Sewer and Drainage Pipe and Fittings
American Association of State Highway and Transportation Officials
- AASHTO M252-21-UL - Corrugated Polyethylene Drainage Pipe
- AASHTO M294-21-UL - Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60- in.) Diameter

Manufacturer
- ADS Canada
Distributor
- Canada Waterworks
- E.S. Hubbell & Sons Ltd
- Emco Waterworks
- ICONIX Waterworks
- Wolseley Waterworks Group

Haider Nasrullah, Engineered Products Manager
Haider Nasrullah
ADS Canada
100 Gerald Parkway
Thorndale ON N0M2P0
haider.nasrullah@ads-pipe.com
Phone: 6478509417
Fax: 844-220-5127

Cody Neath, Engineered Products Manager
ADS Canada
100 Gerald Parkway
Thorndale ON N0M 2P0
cody.neath@ads-pipe.com
Cellular: 519-465-9958

Stacy Normandin, Canada Zone Administrative Assistant
ADS Canada
250A Boulevard Industriel
St-Germain QC J0C 1K0
Stacy.Normandin@ads-pipe.com
Phone: 819-395-4244
Fax: 819-395-4199

Mervat Sefin, Municipal Engineering Manager Ontario
ADS Canada
100 Gerald Parkway
Thorndale ON N0M 2P0
mervat.sefin@adspipe.com
Phone: 204-218-2901

ADS 100 - 1,500 mm (4 - 60") N-12 Water-Tight (WT) Corrugated HDPE Pipe

About

Membership

Links