Standards

Search Results

Standard List

Ontario Provincial Standards
- Volume 1 - Common Construction Specifications
- Volume 2 - Common Material Specifications
- Volume 3 - Drawings, General Work
- Volume 4 - Drawings, Electrical Work
- Volume 5 - Provincial Construction Specifications
- Volume 6 - Provincial Material Specifications
- Volume 7 - Municipal Construction Specifications
  - Division 1 - General Specifications
  - Division 2 - General Grading
  - Division 3 - Pavements
  - Division 4 - Drainage, Watermains, and Utility
    - OPSS.MUNI 401 Trenching, Backfilling, and Compacting
    - OPSS.MUNI 402 Excavating, Backfiling and Compacting for Maintenance Holes, Catch Basins, Ditch Inlets and Valve Chambers
    - OPSS.MUNI 403 Rock Excavation for Pipelines, Utilities and Associated Structures in Open Cut
    - OPSS.MUNI 404 Support Systems
    - OPSS.MUNI 405 Pipe Subdrains
    - OPSS.MUNI 407 New Maintenance Hole, Catch Basin, Ditch Inlet, and Valve Chamber Installation
    - OPSS.MUNI 408 Adjusting or Rebuilding Maintenance Holes, Catch Basins, Ditch Inlets, and Valve Chambers
    - OPSS.MUNI 409 Closed-Circuit Television (CCTV) Inspection of Pipelines
    - OPSS.MUNI 410 PIPE SEWER INSTALLATION IN OPEN CUT
    - OPSS.MUNI 411 Cleaning and Flushing of Pipe Sewers, Catch Basins, Maintenance Holes, Ditch Inlets, and Oil-Grit Separators
    - OPSS.MUNI 412 Forcemain Installation in Open Cut
    - OPSS.MUNI 413 Manure Pipeline Installation in Open Cut
    - OPSS.MUNI 415 Pipeline Installation by Tunnelling
    - OPSS.MUNI 416 Pipeline and Utility Installation by Jacking and Boring
    - OPSS.MUNI 421 PIPE CULVERT INSTALLATION IN OPEN CUT
    - OPSS.MUNI 422 Precast Reinforced Concrete Box Culverts in Open Cut
    - OPSS.MUNI 432 Zoom Camera Inspections
    - OPSS.MUNI 434 Laser and LiDAR Surveying of Pipelines
    - OPSS.MUNI 435 Sonar Inspections of Gravity Pipe Sewers and Culverts
    - OPSS.MUNI 436 Locating Gravity Pipe Sewers
    - OPSS.MUNI 438 Mandrel Deflection Inspections
    - OPSS.MUNI 439 Direct Measurement Inspections
    - OPSS.MUNI 441 Watermain Installation in Open Cut
    - OPSS.MUNI 442 Corrosion Protection of New and Existing Watermains
    - OPSS.MUNI 443 Rehabilitation of Non-Pressure Pipe by Cured-In-Place Pipe (CIPP) Liner
    - OPSS.MUNI 444 Sewage Forcemain Rehabilitation by Cured-In-Place (CIPP) Liner
    - OPSS.MUNI 445 Watermain Rehabilitation by Cured-In-Place Pipe (CIPP) Lining
    - OPSS.MUNI 450 Pipeline and Utility Installation in Soil by Horizontal Directional Drilling
    - OPSS.MUNI 460 Gravity and Sewer Rehabilitation by Cured-in-Place Pipe
    - OPSS.MUNI 462 Cement Mortar Lining of Watermains
    - OPSS.MUNI 463 Pipeline and Conduit Installation by Pipe Bursting
    - OPSS.MUNI 465 Sewer Pipeline and Culvert Rehabilitation by PVC Fold and Form Liner
    - OPSS.MUNI 490 Site Preparation for Pipelines, Utilities, and Associated Structures
    - OPSS.MUNI 491 Construction Specification for Preservation, Protection, and Reconstruction of Existing Facilities
    - OPSS.MUNI 492 Site Restoration following Installation of Pipelines, Utilities, and Associated Structures
    - OPSS.MUNI 493 Temporary Potable Water Supply Services
  - Division 5 - General Construction
  - Division 6 - Electrical
  - Division 7 - Traffic Safety
  - Division 8 - Environmental and Landscape
  - Division 9 - Structural
- Volume 8 - Municipal Material Specifications
Region of Durham
City of London
Ontario Statutes, Regulations, etc
ASTM International
Canadian Standards Association
Other Standards

Ontario Provincial Standards > Volume 7 - Municipal Construction Specifications > Division 4 - Drainage, Watermains, and Utility > OPSS.MUNI 441 - Watermain Installation in Open Cut

OPSS.MUNI 441

Name:	Watermain Installation in Open Cut
Code:	OPSS.MUNI 441
Description:
Type:	Specification
Version:	Nov 2021
Date:	2021-11-30
Document:	View Standard (opens in new tab)