Search Results
Standard List
- Ontario Provincial Standards
- Region of Durham
- City of London
- Ontario Statutes, Regulations, etc
- ASTM International
- Canadian Standards Association
- Other Standards
- American Association of State Highway and Transportation Officials
- American Concrete Institute
- American National Standards
- American Society of Mechanical Engineers
- American Water Works Association
- Bureau de Normalisation du Québec
- Canadian Council of Independent Laboratories
- Comité Européen de Normalisation/European Committee for Standardization/Europaisches Komitee fur Normung
- Canadian General Standards Board
- Canadian Acts and Regulations
- Factory Mutual
- Goods and Services Identification Number
- International Concrete Repair Institute
- Institute of Electrical and Electronics Engineers
- International Organization for Standardization
- International Slurry Surfacing Association
- Manufacturers Standard Society
- National Council Highway Research Program
- National Master Specification
- Standards of accredited organizations or other agencies
- Strategic Highway Research Program
- Society for Protective Coatings
- SSPC - Seventh Edition, 1995 Systems and Specifications
- SSPC Painting Manual, Volume 1, 3rd Edition Good Painting Practice
- SSPC-AB 1 Mineral and Slag Abrasives
- SSPC-AB 2 Cleanliness of Recycled Ferrous Metallic Abrasives
- SSPC-AB 3 Newly Manufactured or Re-Manufactured Steel Abrasives
- SSPC-CS 23.00(I) Interim Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
- SSPC-Guide 10 Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content Requirements
- SSPC-Guide 11 Guide for Coating Concrete
- SSPC-Guide 12 Guide for Illumination of Industrial Painting Projects
- SSPC-Guide 13 Guide for the Identification and Use of Industrial Coating Material in Computerized Product Databases
- SSPC-Guide 14 Guide for the Repair of Imperfections in Galvanized or Inorganic Zinc Coated Steel Using Organic Zinc-Rich Coating
- SSPC-Guide 6 Guide for Containing Debris Generated During Paint Removal Operations
- SSPC-Guide 7 Guide for the Disposal of Lead-Contaminated Surface Preparation Debris
- SSPC-Guide 9 Guide for Atmospheric Testing of Coatings in the Field
- SSPC-ME 1 Uncontaminated Rusted Steel
- SSPC-PA 1 Shop, Field, and Maintenance Painting of Steel
- SSPC-PA 2 Measurement of Dry Coating Thickness With Magnetic Gages
- SSPC-PA COM Commentary on Paint Application
- SSPC-PA Guide 3 A Guide to Safety in Paint Application
- SSPC-PA Guide 4 Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems
- SSPC-PA Guide 5 Guide to Maintenance Painting Programs
- SSPC-Paint 101 Aluminum Alkyd Paint (Type I, Leafing and Type II, Non-Leafing)
- SSPC-Paint 102 Black Alkyd Paint
- SSPC-Paint 103 Black Phenolic Paint
- SSPC-Paint 104 White or Tinted Alkyd Paint
- SSPC-Paint 106 Black Vinyl Paint
- SSPC-Paint 108 High-Build Thixotropic Leafing Aluminum Paint
- SSPC-Paint 11 Red Iron Oxide, Zinc Chromate, Raw Linseed Oil, and Alkyd Primer
- SSPC-Paint 12 Cold-Applied Asphalt Mastic (Extra Thick Film)
- SSPC-Paint 15 Steel Joist Shop Primer
- SSPC-Paint 16 Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint
- SSPC-Paint 17 Chlorinated Rubber Inhibitive Primer
- SSPC-Paint 18 Chlorinated Rubber Intermediate Coat Paint
- SSPC-Paint 19 Chlorinated Rubber Topcoat Paint
- SSPC-Paint 20 Zinc-Rich Primers (Type I, Inorganic, and Type II, Organic)
- SSPC-Paint 21 White or Colored Silicone Alkyd Paint
- SSPC-Paint 22 Epoxy-Polyamide Paints (Primer, Intermediate, and Topcoat)
- SSPC-Paint 23 Latex Primer for Steel Surfaces
- SSPC-Paint 24 Latex Semigloss Exterior Topcoat
- SSPC-Paint 25 Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel, Type I and Type II
- SSPC-Paint 25.1BCS Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel
- SSPC-Paint 26 Slow Drying Linseed Oil Black Maintenance Primer, (Without Lead and Chromate Pigment)
- SSPC-Paint 27 Basic Zinc Chromate-Vinyl Butyral Wash Primer
- SSPC-Paint 28 Water-Borne Epoxy Primer for Steel Surfaces
- SSPC-Paint 29 Zinc Dust Sacrificial Primer, Performance-Based
- SSPC-Paint 30 Weld-Through Inorganic Zinc Primer
- SSPC-Paint 31 Single-Package Waterborne Alkyd Primer for Steel Surfaces, Performance-Based
- SSPC-Paint 32 Coal Tar Emulsion Coating
- SSPC-Paint 33 Coal Tar Mastic, Cold Applied
- SSPC-Paint 34 Water-Borne Epoxy Topcoat for Steel Surfaces
- SSPC-Paint 35 Medium Oil Alkyd Primer (Air Dry/Low Bake), Type I and Type II
- SSPC-Paint 36 Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-Based
- SSPC-Paint 38 Sngle-Package, Moisture Cure Aliphatic Polyurethane Topcoat, performance based
- SSPC-Paint 39 Two-Component Aliphatic Polyurea Topcoat Fast or Moderate Drying, Performance-Based
- SSPC-Paint 40 Zinc-Rich Moisture-Cure Polyurethane Primer, Performance-Based
- SSPC-Paint 41 Moisture-Cured Polyurethane Primer or Intermediate Coat, Micaceous Iron Oxide Reinforced, Performance-Based
- SSPC-Paint 42 Epoxy Polyamide/Polyamidoamine Primer, Performance-Based
- SSPC-Paint 5 Zinc Dust, Zinc Oxide, and Phenolic Varnish Paint
- SSPC-Paint 8 Aluminum Vinyl Paint
- SSPC-Paint 9 White (or Colored) Vinyl Paint
- SSPC-Paint COM Commentary on Paint Specifications
- SSPC-PS 1.09 Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)
- SSPC-PS 1.10 Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment)
- SSPC-PS 1.12 Three-Coat Oil Base Zinc Chromate Painting System
- SSPC-PS 1.13 One-Coat Oil Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments)
- SSPC-PS 10.01 Hot-Applied Coal Tar Enamel Painting System
- SSPC-PS 10.02 Cold-Applied Coal Tar Mastic Painting System
- SSPC-PS 11.01 Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System
- SSPC-PS 12.01 One-Coat Zinc-Rich Painting System
- SSPC-PS 13.01 Epoxy Polyamide Painting System
- SSPC-PS 14.01 Steel Joist Shop Painting System
- SSPC-PS 15.01 Chlorinated Rubber Painting System for Salt Water Immersion
- SSPC-PS 15.02 Chlorinated Rubber Painting System for Fresh Water Immersion
- SSPC-PS 15.03 Chlorinated Rubber Painting System for Marine and Industrial Environments
- SSPC-PS 15.04 Chlorinated Rubber Painting System for Field Application Over a Shop-Applied Solvent Base Inorganic Zinc-Rich Primer
- SSPC-PS 16.01 Silicone Alkyd Painting System for New Steel
- SSPC-PS 18.01 Three-Coat Latex Painting System
- SSPC-PS 24.00 Latex Painting System for Industrial and Marine Atmospheres, Performance-Based
- SSPC-PS 26.00 Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based Type I, for Use over Blast Cleaned Steel Type II, for Use over Hand Cleaned Steel
- SSPC-PS 27.00 Alkyd Coating System Materials Specification, Performance-Based
- SSPC-PS 28.01 Two-Coat Zinc-Rich Polyurethane Primer/Aliphatic Polyurea Topcoat System, Performance-Based
- SSPC-PS 28.02 Three-Coat Moisture-Cured Polyurethane Coating System, Performance-Based
- SSPC-PS 4.02 Four-Coat Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)
- SSPC-PS 4.04 Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres)
- SSPC-PS 9.01 Cold-Applied Asphalt Mastic Painting System with Extra-Thick Film
- SSPC-PS COM Commentary on Painting Systems
- SSPC-PS Guide 1.00 Guide for Selecting Oil Base Painting Systems
- SSPC-PS Guide 12.00 Guide to Selecting Zinc-Rich Coating Systems
- SSPC-PS Guide 15.00 Guide for Selecting Chlorinated Rubber Painting Systems
- SSPC-PS Guide 17.00 Guide for Selecting Urethane Painting Systems
- SSPC-PS Guide 19.00 Guide for Selecting Painting Systems for Ship Bottoms
- SSPC-PS Guide 2.00 Guide for Selecting Alkyd Painting Systems
- SSPC-PS Guide 20.00 Guide for Selecting Painting Systems for Boottoppings
- SSPC-PS Guide 21.00 Guide for Selecting Painting Systems for Topsides
- SSPC-PS Guide 22.00 Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems
- SSPC-PS Guide 3.00 Guide for Selecting Phenolic Painting Systems
- SSPC-PS Guide 4.00 Guide for Selecting Vinyl Painting Systems
- SSPC-PS Guide 7.00 Guide for Selecting One-Coat Shop Painting Systems
- SSPC-PS Guide 8.00 Guide to Topcoating Zinc-Rich Primers
- SSPC-QP 1 Standard Procedure for Evaluating Painting Contractors (Field Application to Complex Industrial Structures)
- SSPC-QP 2 Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures)
- SSPC-QP 3 Standard Procedure for Evaluating Qualifications of Shop Painting Applicators
- SSPC-QP 4 Standard Procedure for Evaluating the Qualifications of Contractors Disturbing Hazardous Coatings During Demolition and Repair Work
- SSPC-QP 5 Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection Companies
- SSPC-QP COM Commentary on Qualification Procedures
- SSPC-SP 1 Solvent Cleaning
- SSPC-SP 10/NACE No. 2 Near-White Blast Cleaning
- SSPC-SP 11 Power Tool Cleaning to Bare Metal
- SSPC-SP 12/NACE No. 5 Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating
- SSPC-SP 13/NACE No. 6 Surface Preparation of Concrete
- SSPC-SP 14/NACE No. 8 Industrial Blast Cleaning
- SSPC-SP 2 Hand Tool Cleaning
- SSPC-SP 3 Power Tool Cleaning
- SSPC-SP 5/NACE No. 1 White Metal Blast Cleaning
- SSPC-SP 6/NACE No. 3 Commercial Blast Cleaning
- SSPC-SP 7/NACE No. 4 Brush-Off Blast Cleaning
- SSPC-SP 8 Pickling
- SSPC-SP COM Surface Preparation Commentary for Steel and Concrete Substrates
- SSPC-TR 1/NACE 6G194 Thermal Pre-Cleaning
- SSPC-TR 2/NACE 6G198 Wet Abrasive Blast Cleaning
- SSPC-TU 1 Surface-Tolerant Coatings for Steel
- SSPC-TU 2/NACE 6G197 Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment
- SSPC-TU 3 Overcoating
- SSPC-TU 4 Field Methods for Retrieval and Analysis of Soluble Salts on Substrates
- SSPC-TU 5 Accelerated Testing of Industrial Protective Coatings
- SSPC-TU 6 Chemical Stripping of Organic Coatings From Steel Structures
- SSPC-TU 7 Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance Activities
- SSPC-VIS 1-89 Visual Standard for Abrasive Blast Cleaned Steel
- SSPC-VIS 2 Standard Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- SSPC-VIS 3 Visual Standard for Power- and Hand-Tool Cleaned Steel
- SSPC-VIS 4(I)/NACE No. 7 Interim Guide and Visual Reference Photographs for Steel Cleaned by Waterjetting
- Transportation Association of Canada
- Underwriters Laboratory Inc.
- Underwriters' Laboratories of Canada
Other Standards
>
Society for Protective Coatings
>
SSPC-CS 23.00(I) - Interim Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
SSPC-CS 23.00(I)
| Name: | Interim Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel |
| Code: | SSPC-CS 23.00(I) |
| Description: | |
| Type: | Specification |
| Version: | |