Standards

Search Results

Standard List

Ontario Provincial Standards
Region of Durham
City of London
Ontario Statutes, Regulations, etc
ASTM International
- ASTM Standards
  - ASTM 7906-14 Solution Using Toluene and the Rotary Evaporator
  - ASTM A1007 Carbon Steel Wire for Wire Rope
  - ASTM A1008/A1008M Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
  - ASTM A1011/A1011M (Repl A569/A569M,A570/A570M) Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
  - ASTM A1018/A1018M Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
  - ASTM A1019/A1019M (Withdrawn 2012) Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
  - ASTM A1022/A1022M Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
  - ASTM A1023/A1023M Stranded Carbon Steel Wire Ropes for General Purposes
  - ASTM A1024/A1024M Steel Line Pipe, Black, Plain-End, Seamless
  - ASTM A1031/A1031M Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
  - ASTM A1032 Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
  - ASTM A1034/A1034M Testing Mechanical Splices for Steel Reinforcing Bars
  - ASTM A1035/A1035M Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
  - ASTM A1042/A1042M (Withdrawn 2015) Composite Corrugated Steel Pipe for Sewers and Drains
  - ASTM A1044/A1044M Steel Stud Assemblies for Shear Reinforcement of Concrete
  - ASTM A105/A105M Carbon Steel Forgings for Piping Applications
  - ASTM A1055/A1055M Zinc and Epoxy Dual Coated Steel Reinforcing Bars
  - ASTM A1057/A1057M Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
  - ASTM A1060/A1060M Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
  - ASTM A1061/A1061M Testing Multi-Wire Steel Strand
  - ASTM A1063/A1063M Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
  - ASTM A1064/A1064M Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
  - ASTM A1075 Flanged Steel U-Channel Posts
  - ASTM A1078/A1078M Epoxy-Coated Steel Dowels for Concrete Pavement
  - ASTM A108 Steel Bar, Carbon and Alloy, Cold-Finished
  - ASTM A1094/A1094M Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
  - ASTM A116 Metallic-Coated, Steel Woven Wire Fence Fabric
  - ASTM A123/A123M Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
  - ASTM A126 Gray Iron Castings for Valves, Flanges, and Pipe Fittings
  - ASTM A134 Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
  - ASTM A135/A135M Electric-Resistance-Welded Steel Pipe
  - ASTM A139/A139M Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
  - ASTM A143/A143M Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
  - ASTM A148/A148M Steel Castings, High Strength, for Structural Purposes
  - ASTM A153/A153M Zinc Coating (Hot-Dip) on Iron and Steel Hardware
  - ASTM A165 (Withdrawn 1988, Replaced By B766) Electrodeposited Coatings of Cadmium on Steel
  - ASTM A167 Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
  - ASTM A182/A182M Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
  - ASTM A183 Carbon Steel Track Bolts and Nuts
  - ASTM A184/A184M Welded Deformed Steel Bar Mats for Concrete Reinforcement
  - ASTM A185 Steel Welded Wire Reinforcement, Plain, for Concrete
  - ASTM A185/A185M-07 (Withdrawn, Repl by A1064) Steel Welded Wire Reinforcement, Plain, for Concrete
  - ASTM A193/A193M Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature or High Pressure Service and Other Special Purpose Applications
  - ASTM A194/A194M Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
  - ASTM A216/A216M Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
  - ASTM A227/A227M Steel Wire, Cold-Drawn for Mechanical Springs
  - ASTM A239 Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
  - ASTM A240/A240M Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
  - ASTM A242/A242M High-Strength Low-Alloy Structural Steel
  - ASTM A252 Welded and Seamless Steel Pipe Piles
  - ASTM A27/A27M Steel Castings, Carbon for General Application
  - ASTM A276 Stainless Steel Bars and Shapes
  - ASTM A276/A276M Stainless Steel Bars and Shapes
  - ASTM A283/A283M Low and Intermediate Tensile Strength Carbon Steel Plates
  - ASTM A285/A285M Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
  - ASTM A29/A29M Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
  - ASTM A304 Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
  - ASTM A307 Carbon Steel Bolts and Studs, and Threaded Rod 60 000 PSI Tensile Strength
  - ASTM A308/A308M Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
  - ASTM A311/A311M Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
  - ASTM A312/A312M Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
  - ASTM A313/A313M Stainless Steel Spring Wire
  - ASTM A314 Stainless Steel Billets and Bars for Forging
  - ASTM A320/A320M Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
  - ASTM A325M Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
  - ASTM A328/A328M Steel Sheet Piling
  - ASTM A333/A333M Seamless and Welded Steel Pipe for Low-Temperature Service
  - ASTM A336/A336M Alloy Steel Forgings for Pressure and High-Temperature Parts
  - ASTM A351/A351M Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
  - ASTM A354 Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
  - ASTM A36/A36M Carbon Structural Steel
  - ASTM A368-95a Stainless Steel Wire Strand
  - ASTM A370 Mechanical Testing of Steel Products
  - ASTM A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe
  - ASTM A388/A388M Ultrasonic Examination of Steel Forgings
  - ASTM A392 Zinc-Coated Steel Chain-Link Fence Fabric
  - ASTM A394 Steel Transmission Tower Bolts, Zinc-Coated and Bare
  - ASTM A403/A403M Wrought Austenitic Stainless Steel Piping Fittings
  - ASTM A407 Steel Wire, Cold-Drawn, for Coiled-Type Springs
  - ASTM A416/A416M Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
  - ASTM A421/A421M Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
  - ASTM A426/A426M Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
  - ASTM A428/A428M Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
  - ASTM A446/A446M (Withdrawn 1994, Repl By A653) Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Structural (Physical) Quality
  - ASTM A449 Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
  - ASTM A47/A47M Ferritic Malleable Iron Castings
  - ASTM A474 Aluminum-Coated Steel Wire Strand
  - ASTM A48/A48M Gray Iron Castings
  - ASTM A480/A480M General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
  - ASTM A484/A484M General Requirements for Stainless Steel Bars, Billets, and Forgings
  - ASTM A489 Carbon Steel Lifting Eyes
  - ASTM A490M High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
  - ASTM A491 Aluminum-Coated Steel Chain-Link Fence Fabric
  - ASTM A492 Stainless Steel Rope Wire
  - ASTM A493 Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
  - ASTM A496 Steel Wire, Deformed, for Concrete Reinforcement
  - ASTM A496/A496M (Withdrawn, Repl by A1064) Steel Wire, Deformed, for Concrete Reinforcement
  - ASTM A497/A497M Steel Welded Wire Reinforcement, Deformed, for Concrete
  - ASTM A499 Steel Bars and Shapes, Carbon Rolled from "T" Rails
  - ASTM A500/A500M Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
  - ASTM A502 Rivets, Steel, Structural
  - ASTM A510/A510M General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel (Metric)
  - ASTM A513/A513M Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
  - ASTM A518/A518M Corrosion-Resistant High-Silicon Iron Castings
  - ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing
  - ASTM A522/A522M Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
  - ASTM A525M (Withdrawn 1994, Replaced By A653) Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Metric) Withdrawn 1994
  - ASTM A526/A526M (Withdrawn 1994 , Repl by A653) Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
  - ASTM A53/A53M Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
  - ASTM A532/A532M Abrasion-Resistant Cast Irons
  - ASTM A536-84 Ductile Iron Castings
  - ASTM A551/A551M Carbon Steel Tires for Railway and Rapid Transit
  - ASTM A555/A555M General Requirements for Stainless Steel Wire and Wire Rods
  - ASTM A563M Carbon and Alloy Steel Nuts (Metric)
  - ASTM A564/A564M Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
  - ASTM A568/A568M Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled
  - ASTM A569/A569M (Withdrawn 2000, Repl A1011) Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
  - ASTM A570/A570M (Withdrawn 2000, Repl A1011) Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality (Discontinued 2000) ,
  - ASTM A574M Alloy Steel Socket-Head Cap Screws (Metric)
  - ASTM A576 Steel Bars, Carbon, Hot-Wrought, Special Quality
  - ASTM A580/A580M Stainless Steel Wire
  - ASTM A588/A588M High-Strength Low-Alloy Structural Steel 50 ksi [345 MPa] Min Yield Point, with Atmospheric Corrosion Resistance
  - ASTM A6/A6M General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
  - ASTM A603 Zinc-Coated Steel Structural Wire Rope
  - ASTM A606/A606M Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
  - ASTM A609/A609M Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
  - ASTM A615/A615M Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
  - ASTM A616/A616M (Withdrawn 1999, Repl A996) Rail-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
  - ASTM A617/A617M (Withdrawn 1999, Repl A996) Axle-Steel Deformed and Plain Bars for Concrete Reinforcement (Withdrawn 1999)
  - ASTM A635/A635M Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
  - ASTM A641/A641M Zinc-Coated (Galvanized) Carbon Steel Wire
  - ASTM A648 Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
  - ASTM A653/A653M Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  - ASTM A663/A663M Steel Bars, Carbon, Merchant Quality, Mechanical Properties
  - ASTM A666 Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
  - ASTM A668/A668M Steel Forgings, Carbon and Alloy, for General Industrial Use
  - ASTM A684/A684M Steel, Strip, High-Carbon, Cold-Rolled
  - ASTM A702 Steel Fence Posts and Assemblies, Hot Wrought
  - ASTM A704/A704M Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
  - ASTM A706/A706M Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
  - ASTM A709/A709M Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
  - ASTM A715 (Withdrawn 2000) Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability (Withdrawn 2000, Replaced by A1008, A1011)
  - ASTM A716 Ductile Iron Culvert Pipe
  - ASTM A722/A722M Uncoated High-Strength Steel Bar for Prestressing Concrete
  - ASTM A74 Cast Iron Soil Pipe and Fittings
  - ASTM A741 Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
  - ASTM A742/A742M Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
  - ASTM A743/A743M Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
  - ASTM A746 Ductile Iron Gravity Sewer Pipe
  - ASTM A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
  - ASTM A760/A760M Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
  - ASTM A761/A761M Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
  - ASTM A762/A762M Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
  - ASTM A764 Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
  - ASTM A767/A767M Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
  - ASTM A775/A 775M Epoxy-Coated Steel Reinforcing Bars
  - ASTM A775/A775M Epoxy-Coated Steel Reinforcing Bars
  - ASTM A775/A775M Annex A1 Epoxy-Coated Steel Reinforcing Bars (chemical resistance, cathodic disbondment, salt spray resistance, chloride permeability, coating flexibility, relative bond strength, abrasion resistance, impact r
  - ASTM A778/A778M Welded, Unannealed Austenitic Stainless Steel Tubular Products
  - ASTM A779/A779M Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
  - ASTM A780 Repair for Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
  - ASTM A780/A780M Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
  - ASTM A787/A787M Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
  - ASTM A792/A792M Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
  - ASTM A795/A795M Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
  - ASTM A796/A796M Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
  - ASTM A798/A798M Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
  - ASTM A799/A799M Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
  - ASTM A807/A807M Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
  - ASTM A815/A815M Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
  - ASTM A817 Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
  - ASTM A82 Steel Wire, Plain, for Concrete Reinforcement
  - ASTM A82-02/A82M (Withdrawn, Repl by A1064) Steel Wire, Plain, for Concrete Reinforcement
  - ASTM A820/A820M Steel Fibers for Fiber-Reinforced Concrete
  - ASTM A821/A821M Steel Wire, Hard Drawn for Prestressing Concrete Tanks
  - ASTM A824 Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
  - ASTM A849 Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
  - ASTM A854/A854M Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
  - ASTM A858/A858M Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
  - ASTM A871/A871M High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
  - ASTM A872/A872M Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
  - ASTM A881/A881M Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
  - ASTM A882/A882M Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
  - ASTM A884/A884M Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
  - ASTM A886/A886M Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
  - ASTM A888 Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
  - ASTM A899 Steel Wire, Epoxy-Coated
  - ASTM A90/A90M Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
  - ASTM A910/A910M Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
  - ASTM A924/A924M General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
  - ASTM A929/A929M Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
  - ASTM A930 Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
  - ASTM A931 Tension Testing of Wire Ropes and Strand
  - ASTM A933/A933M Vinyl-Coated Steel Wire and Welded Wire Reinforcement
  - ASTM A934/A934M Epoxy-Coated Prefabricated Steel Reinforcing Bars
  - ASTM A944 Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
  - ASTM A955/A955M Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
  - ASTM A961/A961M Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
  - ASTM A967 Chemical Passivation Treatments for Stainless Steel Parts
  - ASTM A970/A970M Headed Steel Bars for Concrete Reinforcement
  - ASTM A974 Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
  - ASTM A975 Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
  - ASTM A978/A978M Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
  - ASTM A992/A992M Structural Steel Shapes
  - ASTM A996/A996M Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
  - ASTM B1 Hard-Drawn Copper Wire
  - ASTM B108/B108M Aluminum-Alloy Permanent Mold Castings
  - ASTM B117 Operating Salt Spray (Fog) Apparatus
  - ASTM B137 Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
  - ASTM B138/B138M Manganese Bronze Rod, Bar, and Shapes
  - ASTM B148 Aluminum-Bronze Sand Castings
  - ASTM B16/B16M Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
  - ASTM B209-14M Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
  - ASTM B22/B22M Bronze Castings for Bridges and Turntables
  - ASTM B221 Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
  - ASTM B240 Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
  - ASTM B26/B26M Aluminum-Alloy Sand Castings
  - ASTM B265 Titanium and Titanium Alloy Strip, Sheet, and Plate
  - ASTM B271/B271M Copper-Base Alloy Centrifugal Castings
  - ASTM B272 Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
  - ASTM B3 Soft or Annealed Copper Wire
  - ASTM B30 Copper Alloys in Ingot Form
  - ASTM B316/B316M Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
  - ASTM B36/B36M Brass Plate, Sheet, Strip, and Rolled Bar
  - ASTM B418 Cast and Wrought Galvanic Zinc Anodes
  - ASTM B447 Welded Copper Tube
  - ASTM B449 Chromates on Aluminum
  - ASTM B452 Copper-Clad Steel Wire for Electronic Application
  - ASTM B487 Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross-Section
  - ASTM B498/B498M Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
  - ASTM B499 Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
  - ASTM B584 Copper Alloy Sand Castings for General Applications
  - ASTM B6 Zinc
  - ASTM B62 Composition Bronze or Ounce Metal Castings
  - ASTM B633 Electrodeposited Coatings of Zinc on Iron and Steel
  - ASTM B669 (Withdrawn 1999) Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
  - ASTM B69 Rolled Zinc
  - ASTM B695 Coatings of Zinc Mechanically Deposited on Iron and Steel
  - ASTM B698 Seamless Copper and Copper Alloy Plumbing Pipe and Tube
  - ASTM B746/B746M Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches and Arches
  - ASTM B750 GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
  - ASTM B766 Electrodeposited Coatings of Cadmium
  - ASTM B789/B789M Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
  - ASTM B790/B790M Structural Design of Corrugated Aluminum Pipe, Pipe-Arches and Arches for Culverts, Storm Seers, and Other Buried Conduits
  - ASTM B833 Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
  - ASTM B843 Magnesium Alloy Anodes for Cathodic Protection
  - ASTM B864/B864M Corrugated Aluminum Box Culverts
  - ASTM B88 Seamless Copper Water Tube
  - ASTM B88M Seamless Copper Water Tube (Metric)
  - ASTM B905 Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
  - ASTM B927/B927M Brass Rod, Bar, and Shapes
  - ASTM B965 High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
  - ASTM C10/C10M Natural Cement
  - ASTM C1005 Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
  - ASTM C1007 Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
  - ASTM C1012/C1012M Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
  - ASTM C1016 Determination of Water Absorption of Sealant Backing
  - ASTM C1017/C1017M Chemical Admixtures for Use in Producing Flowing Concrete
  - ASTM C1019 Sampling and Testing Grout
  - ASTM C1028 Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
  - ASTM C1029 Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
  - ASTM C1038/C1038M Expansion of Hydraulic Cement Mortar Bars Stored in Water
  - ASTM C1042 (Withdrawn 2008) Bond Strength of Latex Systems Used With Concrete By Slant Shear
  - ASTM C1059/C1059M Latex Agents for Bonding Fresh To Hardened Concrete
  - ASTM C1064/C1064M Temperature of Freshly Mixed Portland Cement Concrete
  - ASTM C1072 Measurement of Masonry Flexural Bond Strength
  - ASTM C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
  - ASTM C1083 Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
  - ASTM C1089 Spun Cast Prestressed Concrete Poles
  - ASTM C109/C109M Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
  - ASTM C1090 Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
  - ASTM C1091 Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
  - ASTM C110 Physical Testing of Quicklime, Hydrated Lime, and Limestone
  - ASTM C1103M Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
  - ASTM C1104/C1104M Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
  - ASTM C1107/C1107M Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
  - ASTM C1116/C1116M Fiber-Reinforced Concrete and Shotcrete
  - ASTM C1117-89 (Withdrawn 2003) Time of Setting of Shotcrete Mixtures by Penetration Resistance
  - ASTM C1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
  - ASTM C1134 Water Retention of Rigid Thermal Insulations Following Partial Immersion
  - ASTM C1135 Determining Tensile Adhesion Properties of Structural Sealants
  - ASTM C114 Chemical Analysis of Hydraulic Cement
  - ASTM C1140/C1140M Preparing and Testing Specimens from Shotcrete Test Panels
  - ASTM C1141/C1141M Admixtures for Shotcrete
  - ASTM C1147 Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
  - ASTM C1152/C1152M Acid-Soluble Chloride in Mortar and Concrete
  - ASTM C1157/C1157M Hydraulic Cement
  - ASTM C117 Materials Finer than 75-[mu]m (No. 200) Sieve in Mineral Aggregates by Washing
  - ASTM C1173 Flexible Transition Couplings for Underground Piping Systems
  - ASTM C118 Concrete Pipe for Irrigation or Drainage
  - ASTM C1183/C1183M Extrusion Rate of Elastomeric Sealants
  - ASTM C1184 Structural Silicone Sealants
  - ASTM C118M Concrete Pipe for Irrigation or Drainage (Metric)
  - ASTM C12 Installing Vitrified Clay Pipe Lines
  - ASTM C1202 Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
  - ASTM C1208/C1208M Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
  - ASTM C1214M Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
  - ASTM C1216/C1216M Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
  - ASTM C1222 Evaluation of Laboratories Testing Hydraulic Cement
  - ASTM C1227 Precast Concrete Septic Tanks
  - ASTM C123/C123M Lightweight Particles in Aggregate
  - ASTM C1240 Silica Fume Used in Cementitious Mixtures
  - ASTM C1244 Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
  - ASTM C1246 Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
  - ASTM C1247 Durability of Sealants Exposed to Continuous Immersion in Liquids
  - ASTM C125 Standard Terminology Relating to Concrete and Concrete Aggregates
  - ASTM C1250(Withdrawn 2015) Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
  - ASTM C1260 Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
  - ASTM C1262 Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
  - ASTM C1266 Flow Characteristics of Preformed Tape Sealants
  - ASTM C127 Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
  - ASTM C1272 Heavy Vehicular Paving Brick
  - ASTM C128 Specific Gravity and Absorption of Fine Aggregate
  - ASTM C129 Nonloadbearing Concrete Masonry Units
  - ASTM C1292 Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
  - ASTM C1293 Determination of Length Change of Concrete Due to Alkali-Silica Reaction
  - ASTM C1303/C1303M Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
  - ASTM C1305 Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
  - ASTM C1306 Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
  - ASTM C131 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  - ASTM C1315 Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
  - ASTM C1319 Concrete Grid Paving Units
  - ASTM C1325 Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
  - ASTM C1338 Determining Fungi Resistance of Insulation Materials and Facings
  - ASTM C136/C136M Sieve Analysis of Fine and Coarse Aggregates
  - ASTM C1372 Dry-Cast Segmental Retaining Wall Units
  - ASTM C138/C138M Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
  - ASTM C1382 Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
  - ASTM C139 Concrete Masonry Units for Construction of Catch Basins and Manholes
  - ASTM C1399/C1399M Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
  - ASTM C14 NonReinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
  - ASTM C140/C140M Sampling and Testing Concrete Masonry Units and Related Units
  - ASTM C1404/C1404M (Withdrawn 2010) Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension
  - ASTM C141/C141M Hydrated Hydraulic Lime for Structural Purposes
  - ASTM C1417M Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
  - ASTM C143/C143M Slump of Hydraulic Cement Concrete
  - ASTM C1433M Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers [Metric]
  - ASTM C1436 Materials for Shotcrete
  - ASTM C1437 Flow of Hydraulic Cement Mortar
  - ASTM C1438 Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
  - ASTM C1439 Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
  - ASTM C144 Masonry Mortar
  - ASTM C1440 Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
  - ASTM C1442 Conducting Tests on Sealants Using Artificial Weathering Apparatus
  - ASTM C1471/C1471M Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
  - ASTM C1478M Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric]
  - ASTM C1479M Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
  - ASTM C1480/C1480M Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
  - ASTM C1482 Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
  - ASTM C14M Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
  - ASTM C150/C150M Portland Cement
  - ASTM C1504M Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
  - ASTM C1522 Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
  - ASTM C1529 Quicklime, Hydrated Lime, and Limestone for Environmental Uses
  - ASTM C1543 Determining the Penetration of Chloride Ion into Concrete by Ponding
  - ASTM C1550 Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
  - ASTM C1556 Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
  - ASTM C156 Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
  - ASTM C157/C157M Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
  - ASTM C1577 Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
  - ASTM C158 Strength of Glass by Flexure (Determination of Modulus of Rupture)
  - ASTM C1581/C1581M Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
  - ASTM C1582/C1582M Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
  - ASTM C1583/C1583M Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
  - ASTM C1585 Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
  - ASTM C1594 Polyimide Rigid Cellular Thermal Insulation
  - ASTM C1602/C1602M Mixing Water Used in the Production of Hydraulic Cement Concrete
  - ASTM C1604/C1604M Obtaining and Testing Drilled Cores of Shotcrete
  - ASTM C1609/C1609M Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
  - ASTM C1610/C1610M Static Segregation of Self-Consolidating Concrete Using Column Technique
  - ASTM C1613 Precast Concrete Grease Interceptor Tanks
  - ASTM C1618M Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
  - ASTM C1619 Elastomeric Seals for Joining Concrete Structures
  - ASTM C1621/C1621M Passing Ability of Self-Consolidating Concrete by J-Ring
  - ASTM C1622/C1622M Cold-Weather Admixture Systems
  - ASTM C1628 Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
  - ASTM C1645 / C1645M Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
  - ASTM C1646/C1646M Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
  - ASTM C165 Measuring Compressive Properties of Thermal Insulations
  - ASTM C1670 Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
  - ASTM C1675 Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
  - ASTM C1677 Joints for Concrete Box, Using Rubber Gaskets
  - ASTM C1681 Evaluating the Tear Resistance of a Sealant Under Constant Strain
  - ASTM C1688/C1688M Density and Void Content of Freshly Mixed Pervious Concrete
  - ASTM C1697 Blended Supplementary Cementitious Materials
  - ASTM C170/C170M Compressive Strength of Dimension Stone
  - ASTM C1707 Pozzolanic Hydraulic Lime for Structural Purposes
  - ASTM C1708/C1708M Self-leveling Mortars Containing Hydraulic Cements
  - ASTM C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
  - ASTM C171 Sheet Materials for Curing Concrete
  - ASTM C172/C172M Sampling Freshly Mixed Concrete
  - ASTM C173/C173M Air Content of Freshly Mixed Concrete by the Volumetric Method
  - ASTM C1738/C1738M High-Shear Mixing of Hydraulic Cement Pastes
  - ASTM C174 Measuring Thickness of Concrete Elements Using Drilled Concrete
  - ASTM C174/C174M Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
  - ASTM C1740 Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
  - ASTM C1741 Bleed Stability of Cementitious Post-Tensioning Tendon Grout
  - ASTM C1745/C1745M Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
  - ASTM C1746/C1746M Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
  - ASTM C1747/C1747M Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
  - ASTM C1758/C1758M Fabricating Test Specimens with Self-Consolidating Concrete
  - ASTM C1761/C1761M Lightweight Aggregate for Internal Curing of Concrete
  - ASTM C1765 Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
  - ASTM C177 Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
  - ASTM C1781/C1781M Surface Infiltration Rate of Permeable Unit Pavement Systems
  - ASTM C1802 Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
  - ASTM C1804 Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
  - ASTM C185 Standard Test Method for Air Content of Hydraulic Cement Mortar
  - ASTM C187 Normal Consistency of Hydraulic Cement
  - ASTM C188 Density of Hydraulic Cement
  - ASTM C190 (Withdrawn 1990) Tensile Strength of Hydraulic Cement Mortars
  - ASTM C191 Time of Setting of Hydraulic Cement by Vicat Needle
  - ASTM C192/C192M Making and Curing Concrete Test Specimens in the Laboratory
  - ASTM C203 Breaking Load and Flexural Properties of Block-Type Thermal Insulation
  - ASTM C209 Cellulosic Fiber Insulating Board
  - ASTM C215 Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
  - ASTM C216 Facing Brick (Solid Masonry Units Made from Clay or Shale)
  - ASTM C219 Hydraulic Cement
  - ASTM C226 Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
  - ASTM C227 Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
  - ASTM C230/C230M Flow Table for Use in Tests of Hydraulic Cement
  - ASTM C231/C231M Air Content of Freshly Mixed Concrete by the Pressure Method
  - ASTM C232/C232M Bleeding of Concrete
  - ASTM C233/C233M Air-Entraining Admixtures for Concrete, Standard Test Method
  - ASTM C234 (Withdrawn, No Replacement) Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel
  - ASTM C25 Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
  - ASTM C260/260M Air-Entraining Admixtures for Concrete
  - ASTM C266 Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
  - ASTM C267 Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
  - ASTM C270 Mortar for Unit Masonry
  - ASTM C272/C272M Water Absorption of Core Materials for Structural Sandwich Constructions
  - ASTM C273/C273M Shear Properties of Sandwich Core Materials
  - ASTM C29/C29M Bulk Density (Unit Weight) and Voids in Aggregate
  - ASTM C293/C293M Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
  - ASTM C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
  - ASTM C296/C296M Asbestos-Cement Pressure Pipe
  - ASTM C297/C297M Flatwise Tensile Strength of Sandwich Constructions
  - ASTM C301 Vitrified Clay Pipe
  - ASTM C303 Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
  - ASTM C307 Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
  - ASTM C309 Liquid Membrane-Forming Compounds for Curing Concrete
  - ASTM C31/C31M Making and Curing Concrete Test Specimens in the Field
  - ASTM C311/C311M Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
  - ASTM C315 Clay Flue Linings
  - ASTM C33/C33M Concrete Aggregates
  - ASTM C330/C330M Lightweight Aggregates for Structural Concrete
  - ASTM C331/C331M Lightweight Aggregates for Concrete Masonry Units
  - ASTM C332 Lightweight Aggregates for Insulating Concrete
  - ASTM C341/C341M Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
  - ASTM C348 Flexural Strength of Hydraulic-Cement Mortars
  - ASTM C351 (Withdrawn 2008) Mean Specific Heat of Thermal Insulation
  - ASTM C356 Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
  - ASTM C359 Early Stiffening of Hydraulic Cement (Mortar Method)
  - ASTM C361 Reinforced Concrete Low-Head Pressure Pipe
  - ASTM C361M Reinforced Concrete Low-Head Pressure Pipe [Metric]
  - ASTM C387/C387M Packaged, Dry, Combined Materials for Mortar and Concrete
  - ASTM C39 Compressive Strength of Cylindrical Concrete Specimens
  - ASTM C39/C39M Compressive Strength of Cylindrical Concrete Specimens
  - ASTM C393/C393M Core Shear Properties of Sandwich Constructions by Beam Flexure
  - ASTM C4 Clay Drain Tile and Perforated Clay Drain Tile
  - ASTM C403/C403M Time of Setting of Concrete Mixtures by Penetration Resistance
  - ASTM C411 Hot-Surface Performance of High-Temperature Thermal Insulation
  - ASTM C413 Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  - ASTM C42/C42M Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
  - ASTM C423 Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
  - ASTM C425 Compression Joints for Vitrified Clay Pipe and Fittings
  - ASTM C428/C428M Asbestos-Cement Nonpressure Sewer Pipe
  - ASTM C443M Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
  - ASTM C451 Early Stiffening of Hydraulic Cement (Paste Method)
  - ASTM C457 Microscopical Determination of Parameters of the Air Void System in Hardened Concrete
  - ASTM C457/C457M Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
  - ASTM C465 Processing Additions for Use in the Manufacture of Hydraulic Cements
  - ASTM C469/C469M Static Modulus of Elasticity and Poisons's Ratio of Concrete in Compression
  - ASTM C473 Physical Testing of Gypsum Panel Products
  - ASTM C476 Grout for Masonry
  - ASTM C478M Precast Reinforced Concrete Manhole Sections (Metric)
  - ASTM C490/C490M Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
  - ASTM C494/C494M Chemical Admixtures for Concrete
  - ASTM C495/C495M Compressive Strength of Lightweight Insulating Concrete
  - ASTM C496/C496M Splitting Tensile Strength of Cylindrical Concrete Specimens
  - ASTM C497M Concrete Pipe, Manhole Sections, or Tile [Metric]
  - ASTM C500/C500M Asbestos-Cement Pipe
  - ASTM C501 Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
  - ASTM C506M Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
  - ASTM C507 Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
  - ASTM C507M Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
  - ASTM C509 Elastomeric Cellular Preformed Gasket and Sealing Material
  - ASTM C510 Staining and Color Change of Single- or Multicomponent Joint Sealants
  - ASTM C511 Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
  - ASTM C512/C512M Creep of Concrete in Compression
  - ASTM C513/C513M Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
  - ASTM C518 Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  - ASTM C531 Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  - ASTM C534/C534M Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
  - ASTM C535 Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
  - ASTM C553 Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
  - ASTM C563 Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
  - ASTM C564 Rubber Gaskets for Cast Iron Soil Pipe and Fittings
  - ASTM C566 Total Evaporable Moisture Content of Aggregate by Drying
  - ASTM C567/C567M Determining Density of Structural Lightweight Concrete
  - ASTM C570 (Withdrawn 2002) Oil- and Resin-Base Caulking Compound for Building Construction
  - ASTM C578 Rigid, Cellular Polystyrene Thermal Insulation
  - ASTM C579 Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
  - ASTM C580 Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
  - ASTM C581 Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
  - ASTM C593 Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
  - ASTM C595/C595M Blended Hydraulic Cements
  - ASTM C596 Drying Shrinkage of Mortar Containing Hydraulic Cement
  - ASTM C603 Extrusion Rate and Application Life of Elastomeric Sealants
  - ASTM C612 Mineral Fiber Block and Board Thermal Insulation
  - ASTM C617/C617M Capping Cylindrical Concrete Specimens
  - ASTM C618 Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
  - ASTM C633 Adhesion or Cohesion Strength of Thermal Spray Coatings
  - ASTM C639 Rheological (Flow) Properties of Elastomeric Sealants
  - ASTM C641 Iron Staining Materials in Lightweight Concrete Aggregates
  - ASTM C642 Density, Absorption, and Voids in Hardened Concrete
  - ASTM C655M Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
  - ASTM C661 Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
  - ASTM C665 Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
  - ASTM C666/C666M Resistance of Concrete to Rapid Freezing and Thawing
  - ASTM C67 Sampling and Testing Brick and Structural Clay Tile
  - ASTM C670 Preparing Precision and Bias Statements for Test Methods for Construction Materials
  - ASTM C672 Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
  - ASTM C672/C672M Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
  - ASTM C679 Tack-Free Time of Elastomeric Sealants
  - ASTM C684(Withdrawn) Making, Accelerated Curing, and Testing Concrete Compression Test Specimens
  - ASTM C685/C685M Concrete Made by Volumetric Batching and Continuous Mixing
  - ASTM C686 Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
  - ASTM C695 Compressive Strength of Carbon and Graphite
  - ASTM C697 Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  - ASTM C700 Vitrified Clay Pipe , Extra Strength, Standard Strength, and Perforated
  - ASTM C702/C702M Reducing Samples of Aggregate to Testing Size
  - ASTM C711 Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
  - ASTM C712 Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
  - ASTM C717 Standard Terminology of Building Seals and Sealants
  - ASTM C719 Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
  - ASTM C744 Prefaced Concrete and Calcium Silicate Masonry Units
  - ASTM C765 Low-Temperature Flexibility of Preformed Tape Sealants
  - ASTM C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
  - ASTM C779/C779M Abrasion Resistance of Horizontal Concrete Surfaces
  - ASTM C78/C78M Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
  - ASTM C780 Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
  - ASTM C782 Softness of Preformed Tape Sealants
  - ASTM C786/C786M Fineness of Hydraulic Cement and Raw Materials by the 300-ìm (No. 50), 150-ìm (No. 100), and 75-ìm (No. 200) Sieves by Wet Methods
  - ASTM C789 (Withdrawn 2000, Replaced by C1433) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
  - ASTM C789M (Withdrawn 2000, Repl by C1433M) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
  - ASTM C792 Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
  - ASTM C793 Effects of Accelerated Weathering on Elastomeric Joint Sealants
  - ASTM C794 Adhesion-in-Peel of Elastomeric Joint Sealants
  - ASTM C795 Thermal Insulation for Use in Contact with Austenitic Stainless Steel
  - ASTM C796/C796M Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
  - ASTM C802 Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
  - ASTM C805/C805 Rebound Number of Hardened Concrete
  - ASTM C806 Restrained Expansion of Expansive Cement Mortar
  - ASTM C807 Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
  - ASTM C822 Standard Terminology Relating to Concrete Pipe and Related Products
  - ASTM C823/C823M Examination and Sampling of Hardened Concrete in Constructions
  - ASTM C825 Precast Concrete Barriers
  - ASTM C827/C827M Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
  - ASTM C828 Low-Pressure Air Test of Vitrified Clay Pipe Lines
  - ASTM C834 Latex Sealants
  - ASTM C836/C836M High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
  - ASTM C845/C845M Expansive Hydraulic Cement
  - ASTM C850 (Withdrawn 2000, Replaced by C1433) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings
  - ASTM C850M (Withdrawn 2000, Repl By C1433M) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings
  - ASTM C857 Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
  - ASTM C858 Underground Precast Concrete Utility Structures
  - ASTM C869/C869M Foaming Agents Used in Making Preformed Foam for Cellular Concrete
  - ASTM C87 Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  - ASTM C87/C87M Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
  - ASTM C873/C873M Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
  - ASTM C876 Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
  - ASTM C877M External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
  - ASTM C88 Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
  - ASTM C881/C881M Epoxy-Resin-Base Bonding Systems for Concrete
  - ASTM C882 Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
  - ASTM C882/C882M Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
  - ASTM C887 Packaged, Dry, Combined Materials for Surface Bonding Mortar
  - ASTM C890 Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
  - ASTM C891 Installation of Underground Precast Concrete Utility Structures
  - ASTM C896 Standard Terminology Relating to Clay Products
  - ASTM C90 Loadbearing Concrete Masonry Units
  - ASTM C900 Pullout Strength of Hardened Concrete
  - ASTM C902 Pedestrian and Light Traffic Paving Brick
  - ASTM C904 Chemical-Resistant Nonmetallic Materials
  - ASTM C907 Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
  - ASTM C91/C91M Masonry Cement
  - ASTM C913 Precast Concrete Water and Wastewater Structures
  - ASTM C915 Precast Reinforced Concrete Crib Wall Members
  - ASTM C918/C918M Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
  - ASTM C920 Elastomeric Joint Sealants
  - ASTM C923M Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
  - ASTM C924M (Withdrawn 2013, no repl) Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
  - ASTM C928/C928M Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
  - ASTM C936/C936M Solid Concrete Interlocking Paving Units
  - ASTM C939 Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
  - ASTM C94/C94M Ready-Mixed Concrete
  - ASTM C942 Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
  - ASTM C944/C944M Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
  - ASTM C952 Bond Strength of Mortar to Masonry Units
  - ASTM C957/C957M High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
  - ASTM C969M Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
  - ASTM C977 Quicklime and Hydrated Lime for Soil Stabilization
  - ASTM C979/C979M Pigments for Integrally Colored Concrete
  - ASTM C981 Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
  - ASTM C985M Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
  - ASTM C989/C989M Slag Cement for Use in Concrete and Mortars
  - ASTM C990 Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
  - ASTM C990M Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
  - ASTM D1000 Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
  - ASTM D1002 Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
  - ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics
  - ASTM D1005 Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
  - ASTM D1042 Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
  - ASTM D1043 Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  - ASTM D1044 Resistance of Transparent Plastics to Surface Abrasion
  - ASTM D1047 Poly(Vinyl Chloride) Jacket for Wire and Cable
  - ASTM D1056 Flexible Cellular Materials-Sponge or Expanded Rubber
  - ASTM D1073 Fine Aggregate for Bituminous Paving Mixtures
  - ASTM D1074 Compressive Strength of Bituminous Mixtures
  - ASTM D1075 Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
  - ASTM D1084 Viscosity of Adhesives
  - ASTM D1117 (Withdrawn 2009) Evaluating Nonwoven Fabrics
  - ASTM D1125 Electrical Conductivity and Resistivity of Water
  - ASTM D113 Ductility of Bituminous Materials
  - ASTM D1139/D1139M Aggregate for Single or Multiple Bituminous Surface Treatments
  - ASTM D1140 Amount of Material in Soils Finer Than 75-µm (No. 200) Sieve in Soils by Washing
  - ASTM D1141 Preparation of Substitute Ocean Water
  - ASTM D1143/D1143M Deep Foundations Under Static Axial Compressive Load
  - ASTM D1148 Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
  - ASTM D1149 Rubber Deterioration-Surface Ozone Cracking in a Chamber
  - ASTM D1155 Roundness of Glass Spheres
  - ASTM D1160 Distillation of Petroleum Products at Reduced Pressure
  - ASTM D1167(Withdrawn 1971, Repl D2939) Asphalt-Base Emulsions for Use as Protective Coatings for Built-Up Roofs
  - ASTM D1171 Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
  - ASTM D1188 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
  - ASTM D1190 (Withdrawn 2002, Replaced by D6690) Concrete Joint Sealer, Hot-Applied Elastic Type
  - ASTM D1191 (Withdrawn 1996, Repl D5329) Concrete Joint Sealers
  - ASTM D1204 Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
  - ASTM D1210 Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
  - ASTM D1212 Measurement of Wet Film Thickness of Organic Coatings
  - ASTM D1214 Sieve Analysis of Glass Spheres
  - ASTM D1227 Emulsified Asphalt Used as a Protective Coating for Roofing
  - ASTM D123 Standard Terminology Relating to Textiles
  - ASTM D1238 Flow Rates of Thermoplastics by Extrusion Plastometer
  - ASTM D1248 Polyethylene Plastics Extrusion Materials For Wire and Cable
  - ASTM D1252 Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
  - ASTM D127 Drop Melting Point of Petroleum Wax, Including Petrolatum
  - ASTM D1293 pH of Water
  - ASTM D1298 Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  - ASTM D130 Corrosiveness to Copper from Petroleum Products by Copper Strip Test
  - ASTM D1308 Effect of Household Chemicals on Clear and Pigmented Organic Finishes
  - ASTM D1309 Settling Properties of Traffic Paints During Storage
  - ASTM D1310 Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
  - ASTM D1327 Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
  - ASTM D1330 Rubber Sheet Gaskets
  - ASTM D1353 Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
  - ASTM D1388 Stiffness of Fabrics
  - ASTM D139 Float Test for Bituminous Materials
  - ASTM D1394 Chemical Analysis of White Titanium Pigments
  - ASTM D140/D140M Sampling Bituminous Materials
  - ASTM D1415 Rubber Property-International Hardness
  - ASTM D1429 Specific Gravity of Water and Brine
  - ASTM D1457 (Withdrawn 1996, Repl D4894/D4895) Polytetrafluorethylene (PTFE) Molding and Extrusion Materials
  - ASTM D1458 Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
  - ASTM D146 Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
  - ASTM D1474/D1474M Indentation Hardness of Organic Coatings
  - ASTM D1475 Density of Liquid Coatings, Inks, and Related Products
  - ASTM D149 Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating
  - ASTM D150 AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  - ASTM D1500 ASTM Color of Petroleum Products (ASTM Color Scale)
  - ASTM D1505 Density of Plastics by the Density-Gradient Technique
  - ASTM D1510 Carbon Black—Iodine Adsorption Number
  - ASTM D1525 Vicat Softening Temperature of Plastics
  - ASTM D1527 (Withdrawn 2014) Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
  - ASTM D1531 Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
  - ASTM D1556/D1556M Density and Unit Weight of Soil in Place by Sand-Cone Method
  - ASTM D1557 Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000ft-lbf/ft3 (2,700 kN-m/m3))
  - ASTM D1558 Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
  - ASTM D1566 Standard Terminology Relating to Rubber
  - ASTM D1598 Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
  - ASTM D1599 Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
  - ASTM D16 Paint, Related Coatings, Materials, and Applications
  - ASTM D1600 Standard Terminology for Abbreviated Terms Relating to Plastics
  - ASTM D1603 Carbon Black Content In Olefin Plastics
  - ASTM D1621 Compressive Properties Of Rigid Cellular Plastics
  - ASTM D1622/D1622M Apparent Density of Rigid Cellular Plastics
  - ASTM D1635/D1635M Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
  - ASTM D1640/D1640M Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
  - ASTM D1644 Nonvolatile Content of Varnishes
  - ASTM D1652 Epoxy Content of Epoxy Resins
  - ASTM D1653 Water Vapor Transmission of Organic Coating Films
  - ASTM D1654 Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
  - ASTM D1655 Aviation Turbine Fuels
  - ASTM D1670/D1670M Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
  - ASTM D1693 Environmental Stress-Cracking of Ethylene Plastics
  - ASTM D1706 (Withdrawn 1966, Replaced by D2240) Indentation Hardness of Plastics by Means
  - ASTM D1709 Impact Resistance of Plastic Film by the Free-Falling Dart Method
  - ASTM D1729 Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
  - ASTM D173/D173M Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
  - ASTM D1737 (Withdrawn 1987, Replaced by D522) Elongation of Attached Organic Coatings with Cylindrical Mandrel Apparatus
  - ASTM D1751 Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
  - ASTM D1752 Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
  - ASTM D1754/D1754M Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  - ASTM D1755 Poly(Vinyl Chloride) Resins
  - ASTM D1763 Epoxy Resins
  - ASTM D1776 Conditioning and Testing Textiles
  - ASTM D1777 Thickness of Textile Materials
  - ASTM D1784 Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  - ASTM D1785 Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
  - ASTM D1790 Brittleness Temperature of Plastic Sheeting by Impact
  - ASTM D1795 Intrinsic Viscosity of Cellulose
  - ASTM D1822 Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
  - ASTM D1849 Package Stability of Paint
  - ASTM D185 Coarse Particles in Pigments, Pastes, and Paints
  - ASTM D1850 (Withdrawn 1989) Concrete Joint Sealer, Cold Application Type
  - ASTM D1869 Rubber Rings for Fiber-Reinforced Cement Pipe
  - ASTM D1875 Density of Adhesives in Fluid Form
  - ASTM D1876 Peel Resistance of Adhesives (T Peel Test)
  - ASTM D1883 CBR (California Bearing Ratio) of Laboratory-Compacted Soils
  - ASTM D1894 Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
  - ASTM D1925 (Withdrawn 1995) Yellowness Index of Plastics
  - ASTM D1929 Determining Ignition Temperature of Plastics
  - ASTM D1970/D1970 Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
  - ASTM D1987 Biological Clogging of Geotextile or Soil/Geotextile Filters
  - ASTM D2000 Rubber Products in Automotive Applications
  - ASTM D2006 (Withdrawn 1975) Characteristic Groups in Rubber Extender and Processing Oils by the Precipitation Method
  - ASTM D2007 Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  - ASTM D2026/D2026M Cutback Asphalt (Slow-Curing Type)
  - ASTM D2027/D2027M Cutback Asphalt (Medium-Curing Type)
  - ASTM D2028/D2028M Cutback Asphalt (Rapid-Curing Type)
  - ASTM D2041/D2041M Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
  - ASTM D2042 Solubility of Asphalt Materials in Trichloroethylene
  - ASTM D2074 Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
  - ASTM D2093 Preparation of Surfaces of Plastics Prior to Adhesive Bonding
  - ASTM D2103 Polyethylene Film and Sheeting
  - ASTM D2105 Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  - ASTM D2122 Determining Dimensions of Thermoplastic Pipe and Fittings
  - ASTM D2126 Response of Rigid Cellular Plastics to Thermal and Humid Aging
  - ASTM D2137 Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics
  - ASTM D2143 Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
  - ASTM D2152 Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
  - ASTM D2166/D2166M Unconfined Compressive Strength of Cohesive Soil
  - ASTM D2167 Density and Unit Weight of Soil in Place by the Rubber Balloon Method
  - ASTM D2170/D2170M Kinematic Viscosity of Asphalts (Bitumens)
  - ASTM D2171/D2171M Viscosity of Asphalts by Vacuum Capillary Viscometer
  - ASTM D2172/D2172M Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
  - ASTM D2178/D2178M Asphalt Glass Felt Used in Roofing and Waterproofing
  - ASTM D2197 Adhesion of Organic Coatings by Scrape Adhesion
  - ASTM D2200 Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
  - ASTM D2202 Slump of Sealants
  - ASTM D2205 Selection of Tests for Traffic Paints
  - ASTM D2227 Natural Rubber (NR) Technical Grades
  - ASTM D2235 Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
  - ASTM D2237 (Withdrawn 1980) Rate-of-Rise (Volume Increase) Properties of Urethane Foaming Systems
  - ASTM D2239 Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
  - ASTM D2240 Rubber Property-Durometer Hardness
  - ASTM D2241 Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
  - ASTM D2243 Freeze-Thaw Resistance of Water-Borne Coatings
  - ASTM D2244 Calculation of Color Differences From Instrumentally Measured Color Coordinates
  - ASTM D2247 Testing Water Resistance of Coatings in 100% Relative Humidity
  - ASTM D2248 Detergent Resistance of Organic Finishes
  - ASTM D2256/D2256M Tensile Properties of Yarns by the Single-Strand Method
  - ASTM D226/D226M Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
  - ASTM D227/D227M Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
  - ASTM D2274 Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
  - ASTM D2282 (Withdrawn 2007) Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
  - ASTM D229 Rigid Sheet and Plate Materials Used for Electrical Insulation
  - ASTM D2290 Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
  - ASTM D2301 Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  - ASTM D2308 Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  - ASTM D2321 Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
  - ASTM D2344/D2344M Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
  - ASTM D2369 Volatile Content of Coatings
  - ASTM D2370 Tensile Properties of Organic Coatings
  - ASTM D2371 Pigment Content of Solvent-Reducible Paints
  - ASTM D2392 Color Of Dyed Aviation Gasolines
  - ASTM D2393 (Withdrawn) Viscosity of Epoxy Resins and Related Components
  - ASTM D2397/D2397M Cationic Emulsified Asphalt
  - ASTM D2398 (Withdrawn 1984, Replaced By D36) Softening Point of Bitumen in Ethylene Glycol (Ring-and-Ball)
  - ASTM D2412 Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  - ASTM D2415 Ash in Coal Tar and Pitch
  - ASTM D2419 Sand Equivalent Value of Soils and Fine Aggregates
  - ASTM D242/D242M Mineral Filler For Bituminous Paving Mixtures
  - ASTM D243/D243M Residue of Specified Penetration
  - ASTM D2434 Permeability of Granular Soils (Constant Head)
  - ASTM D244 Emulsified Asphalts (Viscosity, Sieve Test, Particle Charge Test, Cement Mixing Test, 5-day Settlement Test, Residue)
  - ASTM D2444 Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
  - ASTM D2455 (Withdrawn 2005) Identification of Carboxylic Acids in Alkyd Resins
  - ASTM D2457 Specular Gloss of Plastic Films and Solid Plastics
  - ASTM D2464 Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  - ASTM D2466 Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
  - ASTM D2467 Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  - ASTM D2485 Evaluating Coatings For High Temperature Service
  - ASTM D2486 Scrub Resistance of Wall Paints
  - ASTM D2487 Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
  - ASTM D2488 Description and Identification of Soils (Visual-Manual Procedure)
  - ASTM D25 Round Timber Piles
  - ASTM D2513 Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
  - ASTM D256 Determining the Izod Pendulum Impact Resistance of Plastics
  - ASTM D2563 Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
  - ASTM D2564 Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
  - ASTM D2565 Xenon Arc Exposure of Plastics Intended for Outdoor Applications
  - ASTM D2566 (Withdrawn 1993) Linear Shrinkage of Cured Thermosetting Casting Resins During Cure (Withdrawn 1993)
  - ASTM D257 DC Resistance or Conductance of Insulating Materials
  - ASTM D2574 Resistance of Emulsion Paints in the Container to Attack by Microorganisms
  - ASTM D2583 Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
  - ASTM D2584 Ignition Loss of Cured Reinforced Resins
  - ASTM D2609 Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
  - ASTM D2621 Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  - ASTM D2624 Electrical Conductivity of Aviation and Distillate Fuels
  - ASTM D2628 Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
  - ASTM D2643/D2643M Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
  - ASTM D2657 Heat Fusion Joining of Polyolefin Pipe and Fittings
  - ASTM D2665 Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  - ASTM D2671 Heat-Shrinkable Tubing for Electrical Use
  - ASTM D2672 Joints for IPS PVC Pipe Using Solvent Cement
  - ASTM D2680 Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
  - ASTM D2683 Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
  - ASTM D2697 Volume Nonvolatile Matter in Clear or Pigmented Coatings
  - ASTM D2709 Water and Sediment in Middle Distillate Fuels by Centrifuge
  - ASTM D2726/D2726M Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
  - ASTM D2729 Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  - ASTM D2734 Void Content of Reinforced Plastics
  - ASTM D2737 Polyethylene (PE) Plastic Tubing
  - ASTM D2749 Standard Symbols for Dimensions of Plastic Pipe Fittings
  - ASTM D2751 (Withdrawn 2014) Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
  - ASTM D2754 High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
  - ASTM D276 Identification of Fibers in Textiles
  - ASTM D2765 Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
  - ASTM D2774 Underground Installation of Thermoplastic Pressure Piping
  - ASTM D2792 Solvent and Fuel Resistance of Traffic Paint
  - ASTM D2794 Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
  - ASTM D2805 Hiding Power of Paints by Reflectometry
  - ASTM D2834 Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion
  - ASTM D2835 Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
  - ASTM D2837 Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
  - ASTM D2839 Melt Index Strand for Determining Density of Polyethylene
  - ASTM D2842 Water Absorption of Rigid Cellular Plastics
  - ASTM D2843 Density of Smoke from the Burning or Decomposition of Plastics
  - ASTM D2846/D2846M Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
  - ASTM D2850 Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
  - ASTM D2855 Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
  - ASTM D2859 Ignition Characteristics of Finished Textile Floor Covering Materials
  - ASTM D2863 Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
  - ASTM D2872 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
  - ASTM D2919 Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
  - ASTM D2922 (Withdrawn 2007, Replaced by D6938) Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
  - ASTM D2938 (Withdrawn 2005, Replaced by D7012) Unconfined Compressive Strength of Intact Rock Core Specimens
  - ASTM D2939 Emulsified Bitumens Used as Protective Coatings
  - ASTM D2940/D2940M Graded Aggregate Material For Bases or Subbases for Highways or Airports
  - ASTM D2950/D2950M Density of Bituminous Concrete in Place by Nuclear Methods
  - ASTM D2990 Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
  - ASTM D2992 Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
  - ASTM D2995 Estimating Application Rate of Bituminous Distributors
  - ASTM D2996 Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  - ASTM D3005 Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  - ASTM D3006 Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
  - ASTM D3017 (Withdrawn 2007) Water Content of Soil and Rock in Place by Nuclear Methods (Shallow Depth)
  - ASTM D3034 Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  - ASTM D3035 Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
  - ASTM D3039/D3039M Tensile Properties of Polymer Matrix Composite Materials
  - ASTM D3045 Heat Aging of Plastics Without Load
  - ASTM D3080/D3080M Direct Shear Test of Soils Under Consolidated Drained Conditions
  - ASTM D3137 Rubber Property—Hydrolytic Stability
  - ASTM D3139 Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
  - ASTM D3143/D3143M Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
  - ASTM D3155 Lime Content of Uncured Soil-Lime Mixtures
  - ASTM D3161/D3161M Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
  - ASTM D3163 Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
  - ASTM D3168 Qualitative Identification of Polymers in Emulsion Paints
  - ASTM D3171 Constituent Content of Composite Materials
  - ASTM D3184 Rubber—Evaluation of NR (Natural Rubber)
  - ASTM D3202 (Withdrawn 2007) Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
  - ASTM D3203/D3203M Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
  - ASTM D3212 Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
  - ASTM D3218 Polyolefin Monofilaments
  - ASTM D3261 Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
  - ASTM D3262 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  - ASTM D3271 Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
  - ASTM D3273 Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
  - ASTM D3274 Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
  - ASTM D3278 Flash Point of Liquids by Small Scale Closed-Cup Apparatus
  - ASTM D3282 Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
  - ASTM D3299 Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  - ASTM D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
  - ASTM D3335 Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  - ASTM D3350 Polyethylene Plastics Pipe and Fittings Materials
  - ASTM D3359 Measuring Adhesion by Tape Test
  - ASTM D3363 Film Hardness by Pencil Test
  - ASTM D3381/D3381M Viscosity-Graded Asphalt Cement for Use in Pavement Construction
  - ASTM D3405 (Withdrawn 2002, Replaced by D6690) Joint Sealants, Hot-Applied, for Concrete and Asphalt Pavements
  - ASTM D3406 (Withdrawn, Not Replaced) Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
  - ASTM D3407 (Withdrawn 1996, Repl D5329) Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements
  - ASTM D3410/D3410M Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
  - ASTM D3417 (Withdrawn 2004, Replaced by D3418) Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
  - ASTM D3418 Transition Temperatures of Polymers By Differential Scanning Calorimetry
  - ASTM D344 Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
  - ASTM D345 Sampling and Testing Calcium Chloride for Roads and Structural Applications
  - ASTM D3451 Testing Coating Powders and Powder Coatings
  - ASTM D3517 Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  - ASTM D3535 Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
  - ASTM D3542 Preformed Polychloroprene Elastomeric Joint Seals for Bridges
  - ASTM D3549/D3549M Thickness or Height of Compacted Bituminous Paving Mixture Specimens
  - ASTM D3552 Tensile Properties of Fiber Reinforced Metal Matrix Composites
  - ASTM D3574 Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
  - ASTM D3575 Flexible Cellular Materials Made From Olefin Polymers (Property tests - density, compressive strength, compression set, tensile strength, elongation at break, tear strength)
  - ASTM D36/D36M Softening Point of Bitumen (Ring-and-Ball Apparatus)
  - ASTM D3618 Detection of Lead in Paint and Dried Paint Films
  - ASTM D3628 Selection and Use of Emulsified Asphalts
  - ASTM D3665 Random Sampling of Construction Materials
  - ASTM D3666 Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
  - ASTM D3678 Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
  - ASTM D3679 Rigid Poly(Vinyl Chloride) (PVC) Siding
  - ASTM D3681 Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
  - ASTM D3689 Deep Foundations Under Static Axial Tensile Load
  - ASTM D3718 Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  - ASTM D3723 Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
  - ASTM D3740 Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
  - ASTM D3744/D3744M Aggregate Durability Index
  - ASTM D3747 Emulsified Asphalt Adhesive for Adhering Roof Insulation
  - ASTM D3754 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  - ASTM D3759/D3759M Breaking Strength and Elongation of Pressure-Sensitive Tape
  - ASTM D3767 Rubber—Measurement of Dimensions
  - ASTM D3773/D3773M Length of Woven Fabric
  - ASTM D3775 Fabric Count of Woven Fabric
  - ASTM D3776 / D3776M Mass Per Unit Area (Weight) of Fabric
  - ASTM D3786/D3786M Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
  - ASTM D3828 Flash Point by Small Scale Closed Cup Tester
  - ASTM D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
  - ASTM D3841 Glass-Fiber-Reinforced Polyester Plastic Panels
  - ASTM D3884 Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
  - ASTM D3895 Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
  - ASTM D3910 Design, Testing, and Construction of Slurry Seal
  - ASTM D3914 In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
  - ASTM D3915 (Withdrawn 2015, No Repl) Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
  - ASTM D3916 Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
  - ASTM D3917 Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  - ASTM D3931 Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
  - ASTM D395 Rubber Property-Compression Set
  - ASTM D3960 Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
  - ASTM D3963/D3963M Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
  - ASTM D3965 Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
  - ASTM D3966 Deep Foundations Under Lateral Load
  - ASTM D3977 Determining Sediment Concentration in Water Samples
  - ASTM D3999 Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
  - ASTM D4000 Standard Classification System for Specifying Plastic Materials
  - ASTM D4014 Plain and Steel-Laminated Elastomeric Bearings for Bridges
  - ASTM D4017 Water in Paints and Paint Materials by Karl Fischer Method
  - ASTM D402 Distillation of Cut-Back Asphaltic (Bituminous) Products
  - ASTM D402/D402M Distillation of Cutback Asphalt
  - ASTM D4052 Density and Relative Density of Liquids by Digital Density Meter
  - ASTM D4060 Abrasion Resistance of Organic Coatings by the Taber Abraser
  - ASTM D4061 Retroreflectance of Horizontal Coatings
  - ASTM D4065 Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
  - ASTM D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
  - ASTM D4070 Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
  - ASTM D4097 Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  - ASTM D41/D41M Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
  - ASTM D4101 Polypropylene Injection and Extrusion Materials
  - ASTM D412 Vulcanized Rubber and Thermoplastic Elastomers—Tension
  - ASTM D4123 (Withdrawn 2003) Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003)
  - ASTM D4125/D4125M Asphalt Content of Bituminous Mixtures by the Nuclear Method
  - ASTM D413 Rubber Property - Adhesion to Flexible Substrate
  - ASTM D4142 Testing Epoxy Resins
  - ASTM D4145 Coating Flexibility of Prepainted Sheet
  - ASTM D4161 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  - ASTM D4182(Withdrawn 2010) Evaluation of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal
  - ASTM D4214 Evaluating the Degree of Chalking of Exterior Paint Films
  - ASTM D4215 Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
  - ASTM D4216 Rigid Poly (Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds
  - ASTM D4218 Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
  - ASTM D4219 Unconfined Compressive Strength Index of Chemical-Grouted Soils
  - ASTM D422 Particle-Size Analysis of Soils
  - ASTM D4226 Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
  - ASTM D4238 (Withdrawn 1996) Electrostatic Propensity of Textiles (Withdrawn 1996)
  - ASTM D4258 Standard Practice for Surface Cleaning Concrete for Coating
  - ASTM D4263 Indicating Moisture in Concrete by the Plastic Sheet Method
  - ASTM D4280 Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
  - ASTM D4285 Indicating Oil or Water in Compressed Air
  - ASTM D429 Rubber Property-Adhesion to Rigid Substrates
  - ASTM D43 Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
  - ASTM D4317 Polyvinyl Acetate-Based Emulsion Adhesives
  - ASTM D4318 Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  - ASTM D4354 Sampling of Geosynthetics for Testing
  - ASTM D4355 Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
  - ASTM D4355/D4355M Deterioration of Geotextiles from Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
  - ASTM D4380 Density of Bentonitic Slurries
  - ASTM D4383 Plowable, Raised Retroreflective Pavement Markers
  - ASTM D4385 Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
  - ASTM D4389/D4389M Finished Glass Fabrics Woven From Rovings
  - ASTM D4396 (Withdrawn 2015, No Repl) Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
  - ASTM D4397 Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
  - ASTM D4400 Sag Resistance of Paints Using a Multinotch Applicator
  - ASTM D4402/D4402M Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
  - ASTM D4417 Field Measurement of Surface Profile of Blast Cleaned Steel
  - ASTM D4434/D4434M Poly(Vinyl Chloride) Sheet Roofing
  - ASTM D4435 Rock Bolt Anchor Pull Test
  - ASTM D4439 Standard Terminology for Geosynthetics
  - ASTM D445 Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
  - ASTM D4451 Pigment Content of Paints by Low-Temperature Ashing
  - ASTM D4475 Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method
  - ASTM D4476/D4476M Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
  - ASTM D4479/D4479M Asphalt Roof Coatings—Asbestos-Free
  - ASTM D448 Sizes of Aggregate for Road and Bridge Construction
  - ASTM D449 Asphalt Used in Dampproofing and Waterproofing
  - ASTM D4491/D4491M Water Permeability of Geotextiles by Permittivity
  - ASTM D450 Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
  - ASTM D4505 Preformed Plastic Pavement Marking Tape for Extended Service Life
  - ASTM D4508 Chip Impact Strength of Plastics
  - ASTM D4530 Determination of Carbon Residue (Micro Method)
  - ASTM D4533 Trapezoid Tearing Strength of Geotextiles
  - ASTM D4541 Pull-Off Strength of Coatings Using Portable Adhesion Testers
  - ASTM D4580/D4580M Measuring Delaminations in Concrete Bridge Decks by Sounding
  - ASTM D4585/D4585M Testing Water Resistance of Coatings Using Controlled Condensation
  - ASTM D4586 Asphalt Roof Cement, Asbestos-Free
  - ASTM D4587 Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  - ASTM D4592 Preformed Plastic Pavement Marking Tape for Limited Service Life
  - ASTM D4594 Effects of Temperature on Stability of Geotextiles
  - ASTM D4595 Tensile Properties of Geotextiles by the Wide-Width Strip Method
  - ASTM D4632/D4632M Grab Breaking Load and Elongation of Geotextiles
  - ASTM D4643 Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
  - ASTM D4707 Measuring Paint Spatter Resistance to Roller Application
  - ASTM D4708 Preparation of Uniform Free Films of Organic Coatings
  - ASTM D471 Rubber Property-Effect of Liquids
  - ASTM D4716/D4716M Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
  - ASTM D4719 Prebored Pressuremeter Testing in Soils
  - ASTM D4737 Calculated Cetane Index by Four Variable Equation
  - ASTM D4751 Determining Apparent Opening Size of a Geotextile
  - ASTM D4758 (Withdrawn, No Replacement) Nonvolatile Content of Latexes (Withdrawn 2007)
  - ASTM D4759 Determining the Specification Conformance of Geosynthetics
  - ASTM D4761 Mechanical Properties of Lumber and Wood-Base Structural Material
  - ASTM D4762 Testing Polymer Matrix Composite Materials
  - ASTM D4767 Consolidated Undrained Triaxial Compression Test for Cohesive Soils
  - ASTM D4788 Detecting Delaminations in Bridge Decks Using Infrared Thermography
  - ASTM D4791 Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
  - ASTM D4792/D4792M Potential Expansion of Aggregates from Hydration Reactions
  - ASTM D4796 Bond Strength of Thermoplastic Traffic Marking Materials
  - ASTM D4797 Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
  - ASTM D4812 Unnotched Cantilever Beam Impact Strength of Plastics
  - ASTM D482 Ash from Petroleum Products
  - ASTM D4829 Expansion Index of Soils
  - ASTM D4832 Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
  - ASTM D4833/D4833M Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
  - ASTM D4866/D4866M Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
  - ASTM D4867/D4867M Effect of Moisture on Asphalt Concrete Paving Mixtures
  - ASTM D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls
  - ASTM D4884/D4884M Strength of Sewn or Thermally Bonded Seams of Geotextiles
  - ASTM D4885 Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
  - ASTM D4886 Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
  - ASTM D4894 (Replaces D1457) Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
  - ASTM D4895 (Replaces D1457) Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
  - ASTM D4940 Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
  - ASTM D4956 Retroreflective Sheeting for Traffic Control
  - ASTM D4960 Evaluation of Color for Thermoplastic Traffic Marking Materials
  - ASTM D4972 pH of Soils
  - ASTM D4976 Polyethylene Plastics Molding and Extrusion Materials
  - ASTM D4990 Coal Tar Glass Felt Used in Roofing and Waterproofing
  - ASTM D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control
  - ASTM D5 Penetration of Bituminous Materials
  - ASTM D5/D5M Penetration of Bituminous Materials
  - ASTM D5028 Curing Properties of Pultrusion Resins by Thermal Analysis
  - ASTM D5033 (Withdrawn 2007) The Development of Standards Relating to the Proper Use of Recycled Plastics
  - ASTM D5034 Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  - ASTM D5035 Breaking Force and Elongation of Textile Fabrics (Strip Method)
  - ASTM D5040 Ash Content of Adhesives
  - ASTM D5064 Conducting a Patch Test to Assess Coating Compatibility
  - ASTM D5078/D5078M Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
  - ASTM D5084 Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  - ASTM D5095 Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
  - ASTM D5101 Measuring the Filtration Compatibility of Soil-Geotextile Systems
  - ASTM D5106 Steel Slag Aggregates for Bituminous Paving Mixtures
  - ASTM D5112 Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
  - ASTM D5117 Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  - ASTM D5141 Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
  - ASTM D5147/D5147M Sampling and Testing Modified Bituminous Sheet Material
  - ASTM D5167 Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
  - ASTM D518 (Withdrawn 2008) Rubber Deterioration-Surface Cracking
  - ASTM D5199 Measuring Nominal Thickness of Geotextiles and Geomembranes
  - ASTM D520 Zinc Dust Pigment
  - ASTM D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
  - ASTM D522/D522M Mandrel Bend Test of Attached Organic Coatings
  - ASTM D5229/D5229M Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
  - ASTM D523 Specular Gloss
  - ASTM D5249 Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
  - ASTM D5261 Measuring Mass per Unit Area of Geotextiles
  - ASTM D5262 (supercedes GRI-GG3-90) Evaluating the Unconfined Tension Creep Behavior of Geosynthetics
  - ASTM D5268 Topsoil Used for Landscaping Purposes
  - ASTM D5271 (Withdrawn 2011) Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
  - ASTM D529 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
  - ASTM D5295/D5295M Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
  - ASTM D5321/D5321M Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
  - ASTM D5324 Testing Water-Borne Architectural Coatings
  - ASTM D5329 Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
  - ASTM D5334 Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
  - ASTM D5338 Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
  - ASTM D5360 Design and Construction of Bituminous Surface Treatments
  - ASTM D5363 Anaerobic Single-Component Adhesives (AN)
  - ASTM D5385/D5385M Hydrostatic Pressure Resistance of Waterproofing Membranes
  - ASTM D5397 Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
  - ASTM D541 (Withdrawn 1996) Single Jute Yarn
  - ASTM D542 Index of Refraction of Transparent Organic Plastics
  - ASTM D5420 Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
  - ASTM D543 Evaluating the Resistance of Plastics to Chemical Reagents
  - ASTM D545 Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
  - ASTM D5453 Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  - ASTM D546 Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
  - ASTM D5475 (Withdrawn 2011) Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector
  - ASTM D5493 Permittivity of Geotextiles Under Load
  - ASTM D5494 Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
  - ASTM D5514/D5514M Large Scale Hydrostatic Puncture Testing of Geosynthetics
  - ASTM D5539 Seed Starter Mix
  - ASTM D5546 Solubility of Asphalt Binders in Toluene by Centrifuge
  - ASTM D5607 Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
  - ASTM D5617 Multi-Axial Tension Test for Geosynthetics
  - ASTM D562 Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer Viscometer
  - ASTM D5628 Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
  - ASTM D5648 Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
  - ASTM D5685 “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
  - ASTM D570 Water Absorption of Plastics
  - ASTM D573 Rubber-Deterioration in an Air Oven
  - ASTM D575 Rubber Properties in Compression
  - ASTM D5798 Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
  - ASTM D5801 Toughness and Tenacity of Bituminous Materials
  - ASTM D5813 Cured-In-Place Thermosetting Resin Sewer Piping Systems
  - ASTM D5818 Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage
  - ASTM D5821 Determining the Percentage of Fractured Particles in Coarse Aggregate
  - ASTM D5860 Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
  - ASTM D5868 Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
  - ASTM D5869 Dark Oven Heat Exposure of Roofing and Waterproofing Materials
  - ASTM D5884 Determining Tearing Strength of Internally Reinforced Geomembranes
  - ASTM D5887 Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
  - ASTM D5890 Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
  - ASTM D5891 Fluid Loss of Clay Component of Geosynthetic Clay Liners
  - ASTM D5893/D5893M Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
  - ASTM D5894 Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
  - ASTM D5918 Frost Heave and Thaw Weakening Susceptibility of Soils
  - ASTM D5926 Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
  - ASTM D5930 Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
  - ASTM D5947 Physical Dimensions of Solid Plastics Specimens
  - ASTM D5970 Deterioration of Geotextiles from Outdoor Exposure
  - ASTM D5971/D5971M Sampling Freshly Mixed Controlled Low-Strength Material
  - ASTM D5973 Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
  - ASTM D5977 High Load Rotational Spherical Bearings for Bridges and Structures
  - ASTM D5993 Measuring Mass Per Unit of Geosynthetic Clay Liners
  - ASTM D5994/D5994M Measuring Core Thickness of Textured Geomembranes
  - ASTM D6023 Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
  - ASTM D6024/MD6024 Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
  - ASTM D6040 Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  - ASTM D605 Magnesium Silicate Pigment (Talc)
  - ASTM D6070 Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
  - ASTM D6079 Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
  - ASTM D6084 Elastic Recovery of Bituminuous Materials by Ductilometer
  - ASTM D6087 Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
  - ASTM D6088 Installation of Geocomposite Pavement Drains
  - ASTM D609 Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
  - ASTM D610 Evaluating Degree of Rusting on Painted Steel Surfaces
  - ASTM D6103 (Withdrawn 2013) Flow Consistency of Controlled Low Strength Material (CLSM)
  - ASTM D611 Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
  - ASTM D6114/D6114M Asphalt-Rubber Binder
  - ASTM D6134 Vulcanized Rubber Sheets Used in Waterproofing Systems
  - ASTM D6140 Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
  - ASTM D6153 Materials for Bridge Deck Waterproofing Membrane Systems
  - ASTM D6155 Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
  - ASTM D6164/D6164M Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  - ASTM D618 Conditioning Plastics for Testing
  - ASTM D621 (Withdrawn 1994) Deformation of Plastics Under Load
  - ASTM D6213 Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
  - ASTM D624 Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  - ASTM D6241 Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
  - ASTM D6244 Vertical Compression of Geocomposite Pavement Panel Drains
  - ASTM D626 (Withdrawn 1968) Fire-Retardant Properties of Treated Textile Fabrics (Withdrawn 1968)
  - ASTM D6270 Use of Scrap Tires in Civil Engineering Applications
  - ASTM D6297 Asphaltic Plug Joints for Bridges
  - ASTM D6307 Asphalt Content of Hot-Mix Asphalt by Ignition Method
  - ASTM D632 (Reinstated 2012) Sodium Chloride
  - ASTM D635 Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
  - ASTM D6359 (Withdrawn 2006, Replaced by D7585) Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments
  - ASTM D6372 Design, Testing, and Construction of Micro-Surfacing
  - ASTM D6373 Performance Graded Asphalt Binder
  - ASTM D638 Tensile Properties of Plastics
  - ASTM D6386 Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
  - ASTM D639 (Withdrawn 1987) Battery Containers Made from Hard Rubber or Equivalent Materials (Withdrawn 1987)
  - ASTM D6390 Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
  - ASTM D6454 Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
  - ASTM D6455 Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
  - ASTM D6459 Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
  - ASTM D6460 Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  - ASTM D6461 Silt Fence Materials
  - ASTM D6462 Silt Fence Installation
  - ASTM D6475 (Withdrawn 2015, No Repl) Measuring Mass Per Unit Area of Erosion Control Blankets
  - ASTM D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  - ASTM D6489 Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
  - ASTM D6495/MD6495 Acceptance Testing Requirements for Geosynthetic Clay Liners
  - ASTM D6497/D6497M Mechanical Attachment of Geomembrane to Penetrations or Structures
  - ASTM D6506 Asphalt Based Protection for Below-Grade Waterproofing
  - ASTM D651 (Withdrawn 1989) Tensile Strength of Molded Electrical Insulating Materials
  - ASTM D6524 Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
  - ASTM D6525/D6525M Measuring Nominal Thickness of Rolled Erosion Control Products
  - ASTM D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
  - ASTM D6566 Measuring Mass per Unit Area of Turf Reinforcement Mats
  - ASTM D6567 Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
  - ASTM D6575 Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM's)
  - ASTM D6578/D6578M Determination of Graffiti Resistance
  - ASTM D6599 Construction of Live Fascines on Slopes
  - ASTM D660 Evaluating Degree of Checking of Exterior Paints
  - ASTM D661 Evaluating Degree of Cracking of Exterior Paints
  - ASTM D6622 Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
  - ASTM D6628 Color of Pavement Marking Materials
  - ASTM D6636 Determination of Ply Adhesion Strength of Reinforced Geomembranes
  - ASTM D6637 Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
  - ASTM D6638 Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
  - ASTM D6648 Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
  - ASTM D6662 Polyolefin-Based Plastic Lumber Decking Boards
  - ASTM D668 Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
  - ASTM D6684 Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
  - ASTM D6690 Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
  - ASTM D6693/D6693M Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
  - ASTM D6704 Determining the Workability of Asphalt Cold Mix Patching Material
  - ASTM D6706 Measuring Geosynthetic Pullout Resistance in Soil
  - ASTM D6707 Circular-Knit Geotextile for Use in Subsurface Drainage Applications
  - ASTM D671 (Withdrawn 2002) Flexural Fatigue of Plastics by Constant-Amplitude-of-Force (Withdrawn 2002)
  - ASTM D6711 Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
  - ASTM D6752 Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  - ASTM D6752/D6752M Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
  - ASTM D6757 Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
  - ASTM D6767 Pore Size Characteristics of Geotextiles by Capillary Flow Test
  - ASTM D6768 Tensile Strength of Geosynthetic Clay Liners
  - ASTM D6769/D6769M Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
  - ASTM D6783 Polymer Concrete Pipe
  - ASTM D6797 Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
  - ASTM D6816 Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
  - ASTM D6817/D6817M Rigid Cellular Polystyrene Geofoam
  - ASTM D6818 Ultimate Tensile Properties of Turf Reinforcement Mats
  - ASTM D6837 Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
  - ASTM D6838 Cummins M11 High Soot Test
  - ASTM D6884 Installation of Articulating Concrete Block (ACB) Revetment Systems
  - ASTM D6894 Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
  - ASTM D6904 Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
  - ASTM D6916 Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
  - ASTM D692/D692M Coarse Aggregate for Bituminous Paving Mixtures
  - ASTM D6924 Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  - ASTM D6925 Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
  - ASTM D6926 Preparation of Bituminous Specimens Using Marshall Apparatus
  - ASTM D6927 Marshall Stability and Flow of Asphalt Mixtures
  - ASTM D6928 Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  - ASTM D6929 Freezing of Emulsified Asphalts
  - ASTM D6930 Settlement and Storage Stability of Emulsified Asphalts
  - ASTM D6931 Indirect Tensile (IDT) Strength of Bituminous Mixtures
  - ASTM D6932/D6932M Materials and Construction of Open-Graded Friction Course Plant Mixtures
  - ASTM D6933 Oversized Particles in Emulsified Asphalts (Sieve Test)
  - ASTM D6934 Residue by Evaporation of Emulsified Asphalt
  - ASTM D6935 Determining Cement Mixing of Emulsified Asphalt
  - ASTM D6936 Determining Demulsibility of Emulsified Asphalt
  - ASTM D6937 Determining Density of Emulsified Asphalt
  - ASTM D6938 In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
  - ASTM D6944 Resistance of Cured Coatings to Thermal Cycling
  - ASTM D6946/D6946M Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
  - ASTM D6947 Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
  - ASTM D695 Compressive Properties of Rigid Plastics
  - ASTM D6954 Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
  - ASTM D696 Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C
  - ASTM D698 Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
  - ASTM D6992 Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
  - ASTM D6997 Distillation of Emulsified Asphalt
  - ASTM D6998 Evaluating Aggregate Coating using Emulsified Asphalts
  - ASTM D70 Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
  - ASTM D7001 Geocomposites for Pavement Edge Drains and Other High-Flow Applications
  - ASTM D7003 Strip Tensile Properties of Reinforced Geomembranes
  - ASTM D7004 Grab Tensile Properties of Reinforced Geomembranes
  - ASTM D7005/D7005M Determining the Bond Strength (Ply Adhesion) of Geocomposites
  - ASTM D7006 Ultrasonic Testing of Geomembranes
  - ASTM D7014 Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
  - ASTM D7032 Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
  - ASTM D7056 Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
  - ASTM D7063/D7063M Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
  - ASTM D7064/D7064M Open-Graded Friction Course (OGFC) Mix Design
  - ASTM D7082 Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
  - ASTM D7089 Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
  - ASTM D7091 Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non Ferrous Metals
  - ASTM D7101 Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
  - ASTM D711 No-Pick-Up Time of Traffic Paint
  - ASTM D7113/D7113M Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
  - ASTM D713 Conducting Road Service Tests on Fluid Traffic Marking Materials
  - ASTM D714 Evaluating Degree of Blistering of Paints
  - ASTM D7158 Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)
  - ASTM D7174 Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
  - ASTM D7175 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
  - ASTM D7176 Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
  - ASTM D7180/D7180M Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
  - ASTM D7205/D7205M Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
  - ASTM D7207 (Withdrawn 2014) Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
  - ASTM D7208 Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  - ASTM D7226 Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  - ASTM D7229 Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
  - ASTM D7238 Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  - ASTM D7239 Hybrid Geosynthetic Paving Mat for Highway Applications
  - ASTM D7247 Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
  - ASTM D7258 Polymeric Piles
  - ASTM D7273 Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
  - ASTM D7275 Tensile Properties of Bituminous Geomembranes (BGM)
  - ASTM D7276 Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
  - ASTM D7281 Determining Water Migration Resistance Through Roof Membranes
  - ASTM D7307 Sampling of Thermoplastic Traffic Marking Materials
  - ASTM D7308 Sample Preparation of Thermoplastic Traffic Marking Materials
  - ASTM D7312 Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
  - ASTM D732 Shear Strength of Plastics by Punch Tool
  - ASTM D7322 Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
  - ASTM D7336/D7336M Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
  - ASTM D7337/D7337M Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
  - ASTM D7343 Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  - ASTM D7349 Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
  - ASTM D7351 Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
  - ASTM D7357 Cellulose Fibers for Fiber-Reinforced Concrete
  - ASTM D7367 Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
  - ASTM D7369 Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
  - ASTM D7377 Evaluating the Water Wash-Off Resistance of Traffic Paints
  - ASTM D7378 Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
  - ASTM D7380 Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
  - ASTM D7382 Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
  - ASTM D7396 Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
  - ASTM D7406 Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
  - ASTM D746 Brittleness Temperature of Plastics and Elastomers by Impact
  - ASTM D7460 Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
  - ASTM D7466/D7466M Measuring the Asperity Height of Textured Geomembrane
  - ASTM D747 Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
  - ASTM D7498/D7498M Vertical Strip Drains Using a Large Scale Consolidation Test
  - ASTM D75 Sampling Aggregates
  - ASTM D7508/D7508M Polyolefin Chopped Strands for Use in Concrete
  - ASTM D7522/D7522M Pull-Off Strength for FRP Bonded to Concrete Substrate
  - ASTM D7539 Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
  - ASTM D7556 Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
  - ASTM D7557/D7557M Sampling of Expanded Polystyrene Geofoam Specimens
  - ASTM D7565/D7565M Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
  - ASTM D7568 Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
  - ASTM D7585/D7585M Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
  - ASTM D7613 Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
  - ASTM D7616/D7616M Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
  - ASTM D7617/D7617M Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
  - ASTM D7643 Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
  - ASTM D7693/D7693M Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
  - ASTM D7698 In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
  - ASTM D7701 Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
  - ASTM D7705/D7705M Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
  - ASTM D772 Evaluating Degree of Flaking (Scaling) of Exterior Paints
  - ASTM D7735 Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
  - ASTM D7744/D7744M Tensile Testing of High Performance Polyethylene Tapes
  - ASTM D7748/D7748M Flexural Rigidity of Geogrids, Geotextiles and Related Products
  - ASTM D775 (Withdrawn 1993) Method for Drop Test for Loaded Boxes (Withdrawn 1993)
  - ASTM D7762 Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
  - ASTM D7792/D7792M Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  - ASTM D7803 Standard Practice for Preparation of Zinc (Hot Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
  - ASTM D784 Orange Shellac and Other Indian Lacs for Electrical Insulation
  - ASTM D785 Rockwell Hardness of Plastics and Electrical Insulating Materials
  - ASTM D7853 Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
  - ASTM D790 Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  - ASTM D7906 Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
  - ASTM D7913/D7913M Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
  - ASTM D7914/D7914M Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
  - ASTM D792 Density and Specific Gravity (Relative Density) of Plastics by Displacement
  - ASTM D7942 Thermoplastic Pavement Markings in Non Snow Plow Areas
  - ASTM D7986 Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
  - ASTM D7992/D7992M Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  - ASTM D8 Standard Terminology Relating to Materials for Roads and Pavements
  - ASTM D8008 Standard Practice for Representative Field Sampling of Traffic Paints
  - ASTM D803 Testing Tall Oil
  - ASTM D806 Cement Content of Hardened Soil-Cement Mixtures
  - ASTM D8139 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
  - ASTM D822 Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
  - ASTM D832 Rubber Conditioning For Low Temperature Testing
  - ASTM D854 Specific Gravity of Soil Solids by Water Pycnometer
  - ASTM D86 Distillation of Petroleum Products at Atmospheric Pressure
  - ASTM D868 Determination of Degree of Bleeding of Traffic Paint
  - ASTM D869 Evaluating Degree of Settling of Paint
  - ASTM D870 Testing Water Resistance of Coatings Using Water Immersion
  - ASTM D876 Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
  - ASTM D882 Tensile Properties of Thin Plastic Sheeting
  - ASTM D883 Standard Terminology Relating to Plastics
  - ASTM D891 Specific Gravity, Apparent, of Liquid Industrial Chemicals
  - ASTM D903 Peel or Stripping Strength of Adhesive Bonds
  - ASTM D913 Evaluating Degree of Traffic Paint Line Wear
  - ASTM D926 Flash and Fire Points by Cleveland Open Cup
  - ASTM D937 Cone Penetration of Petrolatum
  - ASTM D946 Penetration-Graded Asphalt Cement for Use in Pavement Construction
  - ASTM D95 Water in Petroleum Products and Bituminous Materials by Distillation
  - ASTM D953 Bearing Strength of Plastics
  - ASTM D955 Measuring Shrinkage from Mold Dimensions of Thermoplastics
  - ASTM D962 Aluminum Powder and Paste Pigments for Paints
  - ASTM D968 Abrasion Resistance of Organic Coatings by Falling Abrasive
  - ASTM D969 Laboratory Determination of Degree of Bleeding of Traffic Paint
  - ASTM D97 Pour Point of Petroleum Products
  - ASTM D977 Emulsified Asphalt
  - ASTM D98 Calcium Chloride
  - ASTM D994/D994M Preformed Expansion Joint Filler for Concrete (Bituminous Type)
  - ASTM E10 Brinell Hardness of Metallic Materials
  - ASTM E104 Maintaining Constant Relative Humidity by Means of Aqueous Solutions
  - ASTM E108 Fire Tests of Roof Coverings
  - ASTM E11 Wire Cloth and Sieves for Testing
  - ASTM E1131 Compositional Analysis by Thermogravimetry
  - ASTM E1132 Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
  - ASTM E1142 Standard Terminology Relating to Thermophysical Properties
  - ASTM E1164 Obtaining Spectrophotometric Data for Object-Color Evaluation
  - ASTM E119 Fire Tests of Building Construction and Materials
  - ASTM E1247 Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
  - ASTM E1252 General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  - ASTM E1260 Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
  - ASTM E1274 Measuring Pavement Roughness Using a Profilograph
  - ASTM E1318 Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
  - ASTM E1332 Determination of Outdoor-Indoor Transmission Class
  - ASTM E1337 Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
  - ASTM E1347 (Replaces E97) Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
  - ASTM E1349 Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
  - ASTM E1356 Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
  - ASTM E136 Behavior of Materials in a Vertical Tube Furnace at 750°C
  - ASTM E1433 (Withdrawn 2010, No Replacement) Selection of Standards on Environmental Acoustics
  - ASTM E1512 Testing Bond Performance of Adhesive-Bonded Anchors
  - ASTM E154 Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
  - ASTM E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
  - ASTM E162 Surface Flammability of Materials Using a Radiant Heat Energy Source
  - ASTM E1640 Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
  - ASTM E1642 General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  - ASTM E1643 Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
  - ASTM E1686 Selection of Environmental Noise Measurements and Criteria
  - ASTM E1703/E1703M Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
  - ASTM E1709 Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
  - ASTM E171 Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
  - ASTM E1710 Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
  - ASTM E1745 Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
  - ASTM E177 Use of the Terms Precision and Bias in ASTM Test Methods
  - ASTM E178 Dealing with Outlying Observations
  - ASTM E1795 Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
  - ASTM E1859/E1859M Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
  - ASTM E1911 Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
  - ASTM E1966 Fire-Resistive Joint Systems
  - ASTM E2030 Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
  - ASTM E2072 Photoluminescent (Phosphorescent) Safety Markings
  - ASTM E2073 Photopic Luminance of Photoluminescent (Phosphorescent) Markings
  - ASTM E2152 Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
  - ASTM E2153 Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
  - ASTM E2176 (Withdrawn 2013, Replaced by E2832) Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting
  - ASTM E2177 Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
  - ASTM E2202 Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
  - ASTM E228 Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
  - ASTM E23 Notched Bar Impact Testing of Metallic Materials
  - ASTM E2300 Highway Traffic Monitoring Devices
  - ASTM E2301 Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
  - ASTM E2340/E2340M Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
  - ASTM E2366 (Withdrawn Feb 2014) Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
  - ASTM E2367 Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
  - ASTM E2380/E2380M Measuring Pavement Texture Drainage Using an Outflow Meter
  - ASTM E2430 Expanded Polystyrene ( x201C;EPS x201D;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems ( x201C;EIFS x201D;)
  - ASTM E2532 Evaluating Performance of Highway Traffic Monitoring Devices
  - ASTM E2560 Data Format for Pavement Profile
  - ASTM E2561 Installation of Inductive Loop Detectors
  - ASTM E2665 Archiving ITS-Generated Traffic Monitoring Data
  - ASTM E2714 Creep-Fatigue Testing
  - ASTM E274/E274M Skid Resistance of Paved Surfaces Using a Full-Scale Tire
  - ASTM E28 Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
  - ASTM E283 Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
  - ASTM E2832 Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
  - ASTM E284 Standard Terminology of Appearance
  - ASTM E2899 Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
  - ASTM E29 Using Significant Digits in Test Data to Determine Conformance with Specifications
  - ASTM E298 Assay of Organic Peroxides
  - ASTM E303 Measuring Surface Frictional Properties Using the British Pendulum Tester
  - ASTM E308 Computing the Colors of Objects by Using the CIE System
  - ASTM E313 Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
  - ASTM E328 Stress Relaxation Tests for Materials and Structures
  - ASTM E329 Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  - ASTM E330 Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
  - ASTM E331 Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
  - ASTM E336 Measurement of Airborne Sound Attenuation between Rooms in Buildings
  - ASTM E386 Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
  - ASTM E4 Force Verification of Testing Machines
  - ASTM E413 Classification for Rating Sound Insulation
  - ASTM E449 Analysis of Calcium Chloride
  - ASTM E477 Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
  - ASTM E488/E488M Strength of Anchors in Concrete and Masonry Elements
  - ASTM E514/E514M Water Penetration and Leakage Through Masonry
  - ASTM E534 Chemical Analysis of Sodium Chloride
  - ASTM E629 (Withdrawn) Field Evaluation of Nematode Control Agents-Determination of Nematode Population Responses to Control Agents (Withdrawn 1996)
  - ASTM E70 pH of Aqueous Solutions With the Glass Electrode
  - ASTM E72 Conducting Strength Tests of Panels for Building Construction
  - ASTM E740/E740M Fracture Testing with Surface-Crack Tension Specimens
  - ASTM E795 Mounting Test Specimens During Sound Absorption Tests
  - ASTM E8/E8M Tension Testing of Metallic Materials
  - ASTM E800 Measurement of Gases Present or Generated During Fires
  - ASTM E808 Describing Retroreflection
  - ASTM E809 Measuring Photometric Characteristics of Retroreflectors
  - ASTM E810 Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  - ASTM E811 Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
  - ASTM E831 Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  - ASTM E84 Surface Burning Characteristics of Building Materials
  - ASTM E90 Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
  - ASTM E903 (Withdrawn 2005) Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
  - ASTM E950/E950M Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
  - ASTM E96/E96M Water Vapor Transmission of Materials
  - ASTM E965 Measuring Pavement Macrotexture Depth Using a Volumetric Technique
  - ASTM E97 (Withdrawn 1991, Replaced By E1347) Directional Reflectance Factor, 45-deg 0-deg, of Opaque Specimens by Broad-Band Filter Reflectometry
  - ASTM E976 Determining the Reproducibility of Acoustic Emission Sensor Response
  - ASTM E991 Color Measurement of Fluorescent Specimens
  - ASTM F1043 Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
  - ASTM F1055 Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
  - ASTM F1057 Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
  - ASTM F1083 Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
  - ASTM F1216 Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
  - ASTM F1249 Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  - ASTM F1267 Metal, Expanded, Steel
  - ASTM F1281 Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
  - ASTM F1282 Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
  - ASTM F1292 Impact Attenuation of Surface Systems Under and Around Playground Equipment
  - ASTM F1336 Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
  - ASTM F1345 Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
  - ASTM F1417 Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
  - ASTM F1473 Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
  - ASTM F1476 Performance of Gasketed Mechanical Couplings for Use in Piping Applications
  - ASTM F1483 Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
  - ASTM F1488 Coextruded Composite Pipe
  - ASTM F1504 Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
  - ASTM F1533 Deformed Polyethylene (PE) Liner
  - ASTM F1545 Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
  - ASTM F1553 Specifying Chain Link Fence
  - ASTM F1554 Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
  - ASTM F1606 Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
  - ASTM F1632 Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
  - ASTM F1637 Standard Practice for Safe Walking Surfaces
  - ASTM F1647 Organic Matter Content of Athletic Field Rootzone Mixes
  - ASTM F1664 Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
  - ASTM F1665 Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
  - ASTM F1667 Driven Fasteners: Nails, Spikes, and Staples
  - ASTM F1668 Construction Procedures for Buried Plastic Pipe
  - ASTM F1674 Joint restraint products for use with PVC pipe
  - ASTM F1675 Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
  - ASTM F1697 Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
  - ASTM F1698 Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
  - ASTM F1732 Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
  - ASTM F1735 Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
  - ASTM F1741 Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
  - ASTM F1743 Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
  - ASTM F1759 Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
  - ASTM F1760 Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
  - ASTM F1803 (Withdrawn Jan 2015) Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
  - ASTM F1815 Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
  - ASTM F1852 “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
  - ASTM F1865 Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
  - ASTM F1866 Poly (Vinyl Chloride ) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
  - ASTM F1867 Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
  - ASTM F1871 Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
  - ASTM F1947 Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
  - ASTM F1960 Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
  - ASTM F1962 Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
  - ASTM F1970 Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
  - ASTM F1974 Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
  - ASTM F2000 Fences for Baseball and Softball Fields
  - ASTM F2019 Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
  - ASTM F2023 Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
  - ASTM F2049 Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
  - ASTM F2080 Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
  - ASTM F2098 Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
  - ASTM F2136 Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
  - ASTM F2159 Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
  - ASTM F2160 Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
  - ASTM F2164 Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
  - ASTM F2176 Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
  - ASTM F2200 Automated Vehicular Gate Construction
  - ASTM F2206 Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
  - ASTM F2217/F2217M Coating/Adhesive Weight Determination
  - ASTM F2262 Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
  - ASTM F2263 Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
  - ASTM F2280 “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
  - ASTM F2282 Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
  - ASTM F2304 Sealing of Sewers Using Chemical Grouting
  - ASTM F2306/F2306M 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
  - ASTM F2329 Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
  - ASTM F2408 Ornamental Fences Employing Galvanized Steel Tubular Pickets
  - ASTM F2418 Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
  - ASTM F2433 Determining Thermoplastic Pipe Wall Stiffness
  - ASTM F2435 Steel Reinforced Polyethylene (PE) Corrugated Pipe
  - ASTM F2453/F2453M Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in. [3871 mm] or Less, in Panels or Rolls, with Uniform Meshes
  - ASTM F2454 Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
  - ASTM F2482 Load-Indicating Externally Threaded Fasteners
  - ASTM F2487 Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
  - ASTM F2510/F2510M Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
  - ASTM F2551 Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
  - ASTM F2561 Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
  - ASTM F2562/F2562M Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
  - ASTM F2599 The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
  - ASTM F2611 Standard Guide for Design and Construction of Chain Link Security Fencing
  - ASTM F2618 Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
  - ASTM F2619/F2619M High-Density Polyethylene (PE) Line Pipe
  - ASTM F2620 Heat Fusion Joining of Polyethylene Pipe and Fittings
  - ASTM F2634 Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
  - ASTM F2648/F2648M 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
  - ASTM F2657 Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
  - ASTM F2658 Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
  - ASTM F2674 (Withdrawn, Replaced by F2329) Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]
  - ASTM F2686 Glass Fiber Reinforced Thermoplastic Pipe
  - ASTM F2688 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
  - ASTM F2718 Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
  - ASTM F2719 Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
  - ASTM F2720/F2720M Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
  - ASTM F2736 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
  - ASTM F2737 Corrugated High Density Polyethylene (HDPE) Water Quality Units
  - ASTM F2762 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  - ASTM F2763 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  - ASTM F2764/F2764M 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
  - ASTM F2787 Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
  - ASTM F2788/F2788M Metric-sized Crosslinked Polyethylene (PEX) Pipe
  - ASTM F2817 Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
  - ASTM F2829 Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
  - ASTM F2831 Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
  - ASTM F2832 Accelerated Corrosion Testing for Mechanical Fasteners
  - ASTM F2833 Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
  - ASTM F2854 Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
  - ASTM F2880 Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.
  - ASTM F2881 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
  - ASTM F2922 Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
  - ASTM F2928 Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
  - ASTM F2946 PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
  - ASTM F2947 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
  - ASTM F2969 Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
  - ASTM F3000/F3000M Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
  - ASTM F3058 Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
  - ASTM F3123 Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
  - ASTM F3148 High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
  - ASTM F355 Shock-Absorbing Properties of Playing Surface Systems and Materials
  - ASTM F402 Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
  - ASTM F405 Corrugated Polyethylene (PE) Pipe and Fittings
  - ASTM F412 Plastic Piping Systems
  - ASTM F436M Hardened Steel Washers [Metric]
  - ASTM F437 Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
  - ASTM F438 Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
  - ASTM F439 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
  - ASTM F441/F441M Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
  - ASTM F442/F442M Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
  - ASTM F449 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
  - ASTM F468 Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
  - ASTM F476 Security of Swinging Door Assemblies
  - ASTM F477 Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  - ASTM F480 Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
  - ASTM F483 Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
  - ASTM F493 Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
  - ASTM F512 Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
  - ASTM F537 Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
  - ASTM F541 Alloy Steel Eyebolts
  - ASTM F552 Standard Terminology Relating to Chain Link Fencing
  - ASTM F567 Installation of Chain-Link Fence
  - ASTM F568M (Withdrawn 2012) Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
  - ASTM F585 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
  - ASTM F593 Stainless Steel Bolts, Hex Cap Screws, and Studs
  - ASTM F594 Stainless Steel Nuts
  - ASTM F606/F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
  - ASTM F626 Fence Fittings
  - ASTM F645 Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
  - ASTM F654 Residential Chain Link Fence Gates
  - ASTM F656 Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
  - ASTM F667/F667M Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
  - ASTM F668 Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
  - ASTM F679 Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
  - ASTM F690 (Withdrawn 2012, No Repl) Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
  - ASTM F714 Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  - ASTM F738M Stainless Steel Metric Bolts, Screws, and Studs
  - ASTM F758 Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
  - ASTM F771 (Withdrawn 2014) Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
  - ASTM F788/F788M Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
  - ASTM F789 Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings
  - ASTM F794 Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
  - ASTM F795 (Withdrawn 2002) Determining the Performance of a Filter Medium Employing a Single-Pass, Constant-Rate, Liquid Test
  - ASTM F810 Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption
  - ASTM F835 Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
  - ASTM F836M Style 1 Stainless Steel Metric Nuts
  - ASTM F876 Crosslinked Polyethylene (PEX) Tubing
  - ASTM F877 Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
  - ASTM F879 Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
  - ASTM F88 Seal Strength of Flexible Barrier Materials
  - ASTM F891 Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
  - ASTM F894 Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
  - ASTM F900 Industrial and Commercial Swing Gates
  - ASTM F901 Aluminum Transmission Tower Bolts and Nuts
  - ASTM F905 Qualification of Polyethylene Saddle-Fused Joints
  - ASTM F913 Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  - ASTM F934 Standard Colors for Polymer-Coated Chain Link Fence Materials
  - ASTM F949 Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings
  - ASTM F959 Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
  - ASTM F964 Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
  - ASTM G10 Specific Bendability of Pipeline Coatings
  - ASTM G109 Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
  - ASTM G115 Measuring and Reporting Friction Coefficients
  - ASTM G12 Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
  - ASTM G14 Impact Resistance of Pipeline Coatings (Falling Weight Test)
  - ASTM G147 Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
  - ASTM G151 Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
  - ASTM G152 Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  - ASTM G153 Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
  - ASTM G154 (Replaces G53) Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  - ASTM G155 Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
  - ASTM G162 Conducting and Evaluating Laboratory Corrosion Tests in Soils
  - ASTM G17 Penetration Resistance of Pipeline Coatings (Blunt Rod)
  - ASTM G180 Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
  - ASTM G20 Chemical Resistance of Pipeline Coatings
  - ASTM G21 Determining Resistance of Synthetic Polymeric Materials to Fungi
  - ASTM G23 (Withdrawn 2000, Replaced By G152) Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
  - ASTM G26 (Withdrawn 2000, Replaced By G155) Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
  - ASTM G34 Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
  - ASTM G48 Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
  - ASTM G51 Measuring pH of Soil for Use in Corrosion Testing
  - ASTM G53 (Withdrawn 2000, Replaced by G154) Operating Light- and Water-Exposure Apparatus (Fluorescent UV-Condensation Type) for Exposure of Nonmetallic Materials (Withdrawn 2000)
  - ASTM G62 Holiday Detection in Pipeline Coatings
  - ASTM G7/G7M Atmospheric Environmental Exposure Testing of Nonmetallic Materials
  - ASTM G8 Cathodic Disbonding of Pipeline Coatings
  - ASTM G85 Modified Salt Spray (Fog) Testing
  - ASTM G90 Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
  - ASTM G95 Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
  - ASTM G97 Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
  - ASTM International Manual Series - MNL 17-2ND-EB Paint and Coating Testing Manual, 15th Edition 2012 - Joseph V. Koleske - Editor
  - ASTM PS131-01 (Withdrawn 2003, Repl by D6752) Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
- Ductile Iron Castings (Grade ...)
Canadian Standards Association
Other Standards

ASTM International > ASTM Standards > ASTM A193/A193M - Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature or High Pressure Service and Other Special Purpose Applications

ASTM A193/A193M

Name:	Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature or High Pressure Service and Other Special Purpose Applications
Code:	ASTM A193/A193M
Description:
Type:	Specification
Version:
Date:	2014-12-01

External References:	Link to Document

Products Associated with Standard

AWWA grooved products (Star® Pipe Canada Inc.)

BOALINQ (Ford Meter Box Company Inc.)

Couplings, Watermain - Model 421 Top Bolt^TM (Smith-Blair Inc.)

Couplings, Watermain - Style FC2A (Ford Meter Box Company Inc.)

Joint Restraint Devices - Series 1350 (Ford Meter Box Company Inc.)

Joint Restraint Devices - Series 1360 (Ford Meter Box Company Inc.)

Joint Restraints, Bell-Lock^TM 115, 165 (Smith-Blair Inc.)

MULTI/JOINT^® 3000 Plus Restraint System (Georg Fischer Piping Systems)

Repair Clamp - SS1 (Romac Industries, Inc.)

Repair Clamps - SS2 & SS3 (Romac Industries, Inc.)

Repair Clamps - Style F1 (Ford Meter Box Company Inc.)

Service Saddle - Style 304 (Romac Industries, Inc.)

Service Saddle - Style 305 (Romac Industries, Inc.)

Service Saddle - Style 306 (Romac Industries, Inc.)

Tapping Sleeve - SST (Romac Industries, Inc.)