Search Results
Standard List
- Ontario Provincial Standards
- Volume 1 - Common Construction Specifications
- Volume 2 - Common Material Specifications
- Volume 3 - Drawings, General Work
- Volume 4 - Drawings, Electrical Work
- Volume 5 - Provincial Construction Specifications
- Volume 6 - Provincial Material Specifications
- Volume 7 - Municipal Construction Specifications
- Division 1 - General Specifications
- Division 2 - General Grading
- Division 3 - Pavements
- Division 4 - Drainage, Watermains, and Utility
- OPSS.MUNI 401 Trenching, Backfilling, and Compacting
- OPSS.MUNI 402 Excavating, Backfiling and Compacting for Maintenance Holes, Catch Basins, Ditch Inlets and Valve Chambers
- OPSS.MUNI 403 Rock Excavation for Pipelines, Utilities and Associated Structures in Open Cut
- OPSS.MUNI 404 Support Systems
- OPSS.MUNI 405 Pipe Subdrains
- OPSS.MUNI 407 New Maintenance Hole, Catch Basin, Ditch Inlet, and Valve Chamber Installation
- OPSS.MUNI 408 Adjusting or Rebuilding Maintenance Holes, Catch Basins, Ditch Inlets, and Valve Chambers
- OPSS.MUNI 409 Closed-Circuit Television (CCTV) Inspection of Pipelines
- OPSS.MUNI 410 PIPE SEWER INSTALLATION IN OPEN CUT
- OPSS.MUNI 411 Cleaning and Flushing of Pipe Sewers, Catch Basins, Maintenance Holes, Ditch Inlets, and Oil-Grit Separators
- OPSS.MUNI 412 Forcemain Installation in Open Cut
- OPSS.MUNI 413 Manure Pipeline Installation in Open Cut
- OPSS.MUNI 415 Pipeline Installation by Tunnelling
- OPSS.MUNI 416 Pipeline and Utility Installation by Jacking and Boring
- OPSS.MUNI 421 PIPE CULVERT INSTALLATION IN OPEN CUT
- OPSS.MUNI 422 Precast Reinforced Concrete Box Culverts in Open Cut
- OPSS.MUNI 432 Zoom Camera Inspections
- OPSS.MUNI 434 Laser and LiDAR Surveying of Pipelines
- OPSS.MUNI 435 Sonar Inspections of Gravity Pipe Sewers and Culverts
- OPSS.MUNI 436 Locating Gravity Pipe Sewers
- OPSS.MUNI 438 Mandrel Deflection Inspections
- OPSS.MUNI 439 Direct Measurement Inspections
- OPSS.MUNI 441 Watermain Installation in Open Cut
- OPSS.MUNI 442 Corrosion Protection of New and Existing Watermains
- OPSS.MUNI 443 Rehabilitation of Non-Pressure Pipe by Cured-In-Place Pipe (CIPP) Liner
- OPSS.MUNI 444 Sewage Forcemain Rehabilitation by Cured-In-Place (CIPP) Liner
- OPSS.MUNI 445 Watermain Rehabilitation by Cured-In-Place Pipe (CIPP) Lining
- OPSS.MUNI 450 Pipeline and Utility Installation in Soil by Horizontal Directional Drilling
- OPSS.MUNI 460 Gravity and Sewer Rehabilitation by Cured-in-Place Pipe
- OPSS.MUNI 462 Cement Mortar Lining of Watermains
- OPSS.MUNI 463 Pipeline and Conduit Installation by Pipe Bursting
- OPSS.MUNI 465 Sewer Pipeline and Culvert Rehabilitation by PVC Fold and Form Liner
- OPSS.MUNI 490 Site Preparation for Pipelines, Utilities, and Associated Structures
- OPSS.MUNI 491 Construction Specification for Preservation, Protection, and Reconstruction of Existing Facilities
- OPSS.MUNI 492 Site Restoration following Installation of Pipelines, Utilities, and Associated Structures
- OPSS.MUNI 493 Temporary Potable Water Supply Services
- Division 5 - General Construction
- Division 6 - Electrical
- Division 7 - Traffic Safety
- Division 8 - Environmental and Landscape
- Division 9 - Structural
- Volume 8 - Municipal Material Specifications
- Region of Durham
- City of London
- Ontario Statutes, Regulations, etc
- ASTM International
- Canadian Standards Association
- Other Standards
Ontario Provincial Standards
>
Volume 7 - Municipal Construction Specifications
>
Division 4 - Drainage, Watermains, and Utility
>
OPSS.MUNI 412 - Forcemain Installation in Open Cut
OPSS.MUNI 412
Name: | Forcemain Installation in Open Cut |
Code: | OPSS.MUNI 412 |
Description: | |
Type: | Specification |
Version: | Nov 2018 |
Date: | 2018-11-01 |
Document: | View Standard (opens in new tab) |