Search Results
Standard List
- Ontario Provincial Standards
- Region of Durham
- City of London
- Ontario Statutes, Regulations, etc
- ASTM International
- Canadian Standards Association
- Other Standards
- American Association of State Highway and Transportation Officials
- American Concrete Institute
- American National Standards
- American Society of Mechanical Engineers
- American Water Works Association
- AWWA AWWA
- AWWA A100-06 Water Wells
- AWWA B100-09 Granular Filter Material
- AWWA B101-12 Precoat Filter Media
- AWWA B102-10 Manganese Greensand for Filters
- AWWA B110-09 Membrane Systems
- AWWA B200-12 Sodium Chloride
- AWWA B201-13 Soda Ash
- AWWA B202-13 Quicklime and Hydrated Lime
- AWWA B300-10 Hypochlorites
- AWWA B301-10 Liquid Chlorine
- AWWA B302-10 Ammonium Sulfate
- AWWA B303-10 Sodium Chlorite
- AWWA B304-13 Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems
- AWWA B305-06 Anhydrous Ammonia
- AWWA B306-07 Aqua Ammonia (Liquid Ammonium Hydroxide)
- AWWA B402-12 Ferrous Sulfate
- AWWA B403-09 Aluminum Sulfate - Liquid, Ground, or Lump
- AWWA B404-08 Liquid Sodium Silicate
- AWWA B405-06 Sodium Aluminate
- AWWA B406-06 Ferric Sulfate
- AWWA B407-12 Liquid Ferric Chloride
- AWWA B408-10 Liquid Polyaluminum Chloride
- AWWA B451-10 Poly (Diallyldimethylammonium Chloride)
- AWWA B452-06 EPI-DMA Polyamines
- AWWA B453-13 Polyacrylamide
- AWWA B501-13 Sodium Hydroxide (Caustic Soda)
- AWWA B502-11 Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate)
- AWWA B503-11 Sodium Tripolyphosphate (Includes addendum B503a-97)
- AWWA B504-12 Monosodium Phosphate, Anhydrous (Includes addendum B504a-97)
- AWWA B505-12 Disodium Phosphate, Anhydrous
- AWWA B506-13 Zinc Orthophosphate
- AWWA B510-12 Carbon Dioxide
- AWWA B511-10 Potassium Hydroxide
- AWWA B512-08 Sulfur Dioxide
- AWWA B550-10 Calcium Chloride
- AWWA B600-10 Powdered Activated Carbon
- AWWA B601-11 Sodium Metabisulfite
- AWWA B602-08 Copper Sulfate (Includes addendum B602a-97)
- AWWA B603-10 Potassium Permanganate
- AWWA B604-12 Granular Activated Carbon
- AWWA B605-13 Reactivation of Granulated Activated Carbon
- AWWA B701-11 Sodium Fluoride
- AWWA B702-11 Sodium Fluorosilicate
- AWWA B703-11 Fluorosilicic Acid
- AWWA C104/A21.4-08 Cement-Mortar Lining for Ductile-Iron Pipe and Fittings
- AWWA C105/A21.5-10 Polyethylene Encasement for Ductile-Iron Pipe Systems
- AWWA C110/A21.10-08 Ductile-Iron and Gray-Iron Fittings
- AWWA C110/A21.10-12 Ductile-Iron and Gray-Iron Fittings
- AWWA C111/A21.11-07 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- AWWA C111/A21.11-12 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- AWWA C115/A21.15-11 Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges
- AWWA C116/A21.16-09 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings
- AWWA C150/A21.50-08 Thickness Design of Ductile-Iron Pipe
- AWWA C151/A21.51-02 Ductile-Iron Pipe, Centrifugally Cast
- AWWA C151/A21.51-09 Ductile-Iron Pipe, Centrifugally Cast
- AWWA C153/A21.53-06 Ductile-Iron Compact Fittings
- AWWA C153/A21.53-11 Ductile-Iron Compact Fittings
- AWWA C200-05 Steel Water Pipe, 6 In. (150 mm) and Larger
- AWWA C200-12 Steel Water Pipe - 6 in. (150 mm) and Larger
- AWWA C200-17 Steel Water Pipe, 6 In. (150 mm) and Larger
- AWWA C203-08 Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied
- AWWA C205-07 Mortar Protective Lining and Coating for Steel Water Pipe 4 In. (100 mm) and Larger—Shop Applied
- AWWA C205-12 Cement-Mortar Protective Lining and Coating for Steel Water Pipe - 4 in. (100 mm) and larger for Water Service - Shop Application
- AWWA C206-03 Field Welding of Steel Water Pipe
- AWWA C206-11 Field Welding of Steel Water Pipe
- AWWA C207-13 Steel Pipe Flanges for Waterworks Service - Sizes 4 in. Through 144 in. (100 mm Through 3,600 mm)
- AWWA C208-07 Dimensions for Fabricated Steel Water Pipe Fittings
- AWWA C208-12 Dimensions for Fabricated Steel Water Pipe Fittings
- AWWA C209-13 Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipe
- AWWA C210-07 Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
- AWWA C213-07 Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
- AWWA C214-07 Tape Coating Systems for the Exterior of Steel Water Pipelines
- AWWA C215-10 Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
- AWWA C216-07 Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fitting
- AWWA C217-09 Petrolatum and Petroleum Wax Tape Coatings for the Exterior of Connections and Fittings for Steel Water Pipelines
- AWWA C218-08 Coating the Exterior of Above Ground Steel Water Pipelines and Fittings
- AWWA C219-11 Bolted, Sleeve-Type Couplings for Plain-End Pipe
- AWWA C220-12 Stainless-Steel Pipe, 1/2 In. (13 mm) and Larger
- AWWA C221-12 Fabricated Steel Mechanical Slip-Type Expansion Joints
- AWWA C222-08 Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
- AWWA C223-07 Fabricated Steel and Stainless Steel Tapping Sleeves
- AWWA C224-11 Nylon-11 Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe and Fittings
- AWWA C225-07 Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
- AWWA C226-13 Stainless Steel Fittings for Waterworks Service, Sizes 1/2 In. Through 72 In. (13 mm Through 1,800 mm)
- AWWA C227-11 Bolted, Split-Sleeve Restrained and Nonrestrained Couplings for Plain-End Pipe
- AWWA C228-08 Stainless-Steel Pipe Flanges for Water Service--Sizes 2 In. Through 72 In. (50 mm Through 1,800 mm)
- AWWA C229-08 Fusion-Bonded Polyethylene Coating for the Exterior of Steel Water Pipelines
- AWWA C230-11 Stainless-Steel Full-Encirclement Repair and Service Connection Clamps
- AWWA C300-11 Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
- AWWA C301-07 Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
- AWWA C302-04 Reinforced Concrete Pressure Pipe, Noncylinder Type
- AWWA C302-11 Reinforced Concrete Pressure Pipe, Noncylinder Type
- AWWA C303-02 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
- AWWA C303-08 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
- AWWA C304-07 Design of Prestressed Concrete Cylinder Pipe
- AWWA C400-03 (Withdrawn - Nov 2008) Asbestos–Cement Pressure Pipe, 4 in. Through 16 in. (100 mm Through 400 mm) , for Water Distribution Systems
- AWWA C401-03 (Withdrawn - Nov 2008) The Selection of Asbestos–Cement Pressure Pipe, 4 in. Through 16 in. (100 mm Through 400 mm), for Water Distribution Systems
- AWWA C402-05 (Withdrawn - Nov 2008) Asbestos–Cement Transmission Pipe, 18 in. Through 42 in. (450 mm Through 1,050 mm), for Water Supply Service
- AWWA C403-05 (Withdrawn - Nov 2008) The Selection of Asbestos–Cement Transmission Pipe, Sizes 18 in. Through 42 in. (450 mm Through 1,050 mm),
- AWWA C500-09 Metal-Seated Gate Valves for Water Supply Service
- AWWA C501-87 Cast-Iron Sluice Gates
- AWWA C502-05 Dry-Barrel Fire Hydrants
- AWWA C503-05 Wet-Barrel Fire Hydrants
- AWWA C504-06 Rubber-Seated Butterfly Valves
- AWWA C504-10 Rubber-Seated Butterfly Valves, 3 In. (75 mm) through 72 In. (1,800 mm)
- AWWA C507-11 Ball Valves, 6 in. through 60 in. (150 mm through 1,500 mm)
- AWWA C508-09 Swing-Check Valves for Waterworks Service, 2 in. (50 mm) Through 24 in.( 600 mm) NPS
- AWWA C509-01 Resilient-Seated Gate Valves for Water Supply Service
- AWWA C509-09 Resilient-Seated Gate Valves for Water Supply Service
- AWWA C510-07 Double Check Valve Backflow Prevention Assembly
- AWWA C511-07 Reduced-Pressure Principle Backflow Prevention Assembly
- AWWA C512 Air Release, Air/Vacuum, and Combination Air Valves for Waterworks Service
- AWWA C513-05 (Withdrawn) Open-Channel, Fabricated-Metal Slide Gates and Open-Channel, Fabricated-Metal Weir Gates
- AWWA C515-09 Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
- AWWA C516-10 Large Diameter Rubber-Seated Butterfly Valves, Sizes 2000 mm (78 in) and larger
- AWWA C517-09 Resilient-Seated Cast-Iron Eccentric Plug Valves
- AWWA C518-13 Dual-Disc Swing-Check Valves for Waterworks Service
- AWWA C519-08 (Withdrawn) Dual-Disc Swing-Check Valves for Waterworks Service
- AWWA C520-10 Knife Gate Valve, Sizes 50 mm (2 in) through 2400 mm (92 in)
- AWWA C530-12 Pilot-Operated Control Valves
- AWWA C540-02 (Superseded) Power-Actuating Devices for Valves and Slide Gates (Superseded - Replaced by C541-08 and C542-09)
- AWWA C541-08 Hydraulic and Pneumatic Cylinder and Vane Type Actuators for Valves and Slide Gates
- AWWA C542-09 Electric Motor Actuators for Valves and Slide Gates
- AWWA C550-13 Protective Epoxy Interior Coatings for Valves and Hydrants
- AWWA C560-07 Cast-Iron Slide Gates
- AWWA C561-12 Fabricated Stainless Steel Slide Gates
- AWWA C562-12 Fabricated Aluminum Slide Gates
- AWWA C563-12 Fabricated Composite Slide Gates
- AWWA C600-10 Installation of Ductile-Iron Water Mains and Their Appurtenances
- AWWA C602-11 Cement-Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger
- AWWA C603-05 (Withdrawn - Nov 2008) Installation of Asbestos Cement Pressure Pipe
- AWWA C604-11 Installation of Steel Water Pipe--4 In. (100 mm) and Larger
- AWWA C605-05 Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water
- AWWA C606-11 Grooved and Shouldered Joints
- AWWA C620-07 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger
- AWWA C651-05 Disinfecting Water Mains
- AWWA C652-11 Disinfection of Water-Storage Facilities
- AWWA C653-03 Disinfection of Water Treatment Plants
- AWWA C654-13 Disinfection of Wells
- AWWA C655-09 Field Dechlorination
- AWWA C670-09 Online Chlorine Analyzer Operation and Maintenance
- AWWA C700-09 Cold-Water Meters - Displacement Type, Bronze Main Case
- AWWA C701-12 Cold-Water Meters - Turbine Type, for Customer Service
- AWWA C702-10 Cold-Water Meters - Compound Type
- AWWA C703-11 Cold-Water Meters - Fire Service Type
- AWWA C704-12 Propeller-Type Meters for Waterworks Applications
- AWWA C706-10 Direct-Reading, Remote-Registration Systems for Cold-Water Meters
- AWWA C707-10 Encoder-Type Remote-Registration Systems for Cold-Water Meters
- AWWA C708-11 Cold-Water Meters - Multijet Type (Includes addendum C708a-98)
- AWWA C710-09 Cold-Water Meters - Displacement Type, Plastic Main Case
- AWWA C712-10 Cold-Water Meter--Singlejet Type
- AWWA C713-10 Cold-Water Meters: Fluidic-Oscillator Type
- AWWA C750-10 Transit-Time Flowmeters in Full Closed Conduits
- AWWA C800-05 Underground Service Line Valves & Fittings
- AWWA C800-12 Underground Service Line Valves and Fittings (Also Included: Collected Standards for Service Line Materials)
- AWWA C800-21 Underground Service Line Valves and Fittings
- AWWA C900-07 Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 in. - 12 in. (100 mm - 300 mm), for Water Transmission and Distribution
- AWWA C900-16 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through 1,500 mm)
- AWWA C901-02 Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service
- AWWA C901-08 Polyethylene (PE) Pressure Pipe and Tubing, ½ in. (13 mm) Through 3 in. (76 mm), for Water Service
- AWWA C903-05 Polyethylene-Aluminum- Polyethylene & Cross-linked Polyethylene-Aluminum- Cross-linked Polyethylene Composite Pressure Pipes, 1/2 In. (12 mm) through 2 In. (50 mm), for Water Service
- AWWA C904-06 Cross-Linked Polyethelyene (PEX) Pressure Pipe, ½ In. (12mm) Through 3 In. (76mm), for Water Service
- AWWA C905-10 Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 350 mm Through 1,200 mm (14 in. Through 48 in.) for Water Transmission and Distribution
- AWWA C906-07 Polyethylene (PE) Pressure Pipe and Fittings, 4 in. (100 mm) Through 63 in. (1,600 mm), for Water Distribution and Transmission
- AWWA C907-12 Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 in. Through 12 in. (100 mm Through 300 mm), for Water Distribution
- AWWA C908-01 (Withdrawn) PVC Self-Tapping Saddle Tees for Use on PVC Pipe
- AWWA C909-09 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. through 24 In. (100 mm through 600 mm) for Water, Wastewater, and Reclaimed Water Service
- AWWA C950-13 Fiberglass Pressure Pipe
- AWWA D100-11 Welded Carbon Steel Tanks for Water Storage
- AWWA D102-11 Coating Steel Water-Storage Tanks
- AWWA D103-09 Factory-Coated Bolted Steel Tanks for Water Storage
- AWWA D104-11 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks
- AWWA D106-10 Sacrificial Anode Cathodic Protection Systems for the Interior Submerged Surfaces of Steel Water Tanks
- AWWA D107-10 Composite Elevated Tanks for Water Storage
- AWWA D108-10 Aluminum Dome Roofs for Water Storage Facilities
- AWWA D110-04 Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks
- AWWA D115-06 Tendon-Prestressed Concrete Water Tanks
- AWWA D120-09 Thermosetting Fiberglass-Reinforced Plastic Tanks
- AWWA D121-12 Bolted Above Ground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks for Water Storage
- AWWA D130-11 Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage
- AWWA E102-06 Submersible Vertical Turbine Pumps
- AWWA E103-07 Horizontal and Vertical Line-Shaft Pumps
- AWWA F101-13 Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders
- AWWA F102-13 Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets
- AWWA F110-12 Ultraviolet Disinfection Systems for Drinking Water
- AWWA G100-11 Water Treatment Plant Operation and Management
- AWWA G200-09 Distribution Systems Operation and Management
- AWWA G300-07 Source Water Protection
- AWWA G400-09 Utility Management System
- AWWA G410-09 Business Practices for Operation and Management
- AWWA G420-09 Communications and Customer Relations
- AWWA G430-09 Security Practices for Operation and Management
- AWWA G440-11 Emergency Preparedness Practices
- AWWA J100-10 Risk and Resilience Management of Water and Waste Water Systems
- AWWA M11 Manual Steel Pipe: Guide for Design and Installation, Fourth Edition
- AWWA M14 Manual Recommended Practice for Backflow Prevention and Cross-Connection Control, Third Edition
- AWWA M17 Manual Installation, Field Testing, and Maintenance of Fire Hydrants, Fourth Edition
- AWWA M23 Manual PVC Pipe - Design and Installation, Second Edition
- AWWA M24 Manual Dual Water Systems (M24), Third Edition
- AWWA M25 Manual Flexible-Membrane Covers and Linings for Potable-Water Reservoirs, Third Edition
- AWWA M27 Manual External Corrosion: Introduction to Chemistry and Control, Second Edition
- AWWA M28 Manual Rehabilitation of Water Mains
- AWWA M31 Manual Distribution System Requirements for Fire Protection (M31), Fourth Edition
- AWWA M32 Manual Computer Modeling of Water Distribution Systems (M32), Third Edition
- AWWA M33 Manual Flowmeters in Water Supply, Second Edition
- AWWA M41 Manual Ductile-Iron Pipe and Fittings, Third Edition
- AWWA M44 Manual Distribution Valves: Selection, Installation, Field Testing, and Maintenance, Second Edition
- AWWA M45 Manual Fiberglass Pipe Design, Third Edition
- AWWA M47 Manual Capital Project Delivery, Second Edition
- AWWA M49 Manual Butterfly Valves: Torque, Head Loss, and Cavitation Analysis, Second Edition
- AWWA M51 Manual Air-Release, Air/Vacuum, and Combination Air Valves, First Edition
- AWWA M54 Manual Developing Rates for Small Systems, First Edition
- AWWA M55 Manual PE Pipe - Design and Installation, First Edition
- AWWA M6 Manual Water Meters - Selection, Installation, Testing, and Maintenance, Fifth Edition
- AWWA M9 Manual Concrete Pressure Pipe, Third Edition
- AWWA Reference Book - Edition 1998 Standard Methods for the Examination of Water and Wastewater, 20th Edition
- Bureau de Normalisation du Québec
- Canadian Council of Independent Laboratories
- Comité Européen de Normalisation/European Committee for Standardization/Europaisches Komitee fur Normung
- Canadian General Standards Board
- Canadian Acts and Regulations
- Factory Mutual
- Goods and Services Identification Number
- International Concrete Repair Institute
- Institute of Electrical and Electronics Engineers
- International Organization for Standardization
- International Slurry Surfacing Association
- Manufacturers Standard Society
- National Council Highway Research Program
- National Master Specification
- Standards of accredited organizations or other agencies
- Strategic Highway Research Program
- Society for Protective Coatings
- Transportation Association of Canada
- Underwriters Laboratory Inc.
- Underwriters' Laboratories of Canada
Other Standards
>
American Water Works Association
>
AWWA C517-09 - Resilient-Seated Cast-Iron Eccentric Plug Valves
AWWA C517-09
| Name: | Resilient-Seated Cast-Iron Eccentric Plug Valves |
| Code: | AWWA C517-09 |
| Description: | |
| Type: | Specification |
| Version: | |
| External References: |
Link to Document |