The Road Authority

DriscoPlex®, 4100

Manufactured by Performance Pipe
Brand: DriscoPlex® PE 3408 HDPE

Municipal & industrial, water distribution - 4100 pipe (IPS sizing, black is std, blue stripes or shell on special order, 4" and larger IPS meet ASTM F714, AWWA C906, and NSF 61.

Sanitary sewer & trenchless rehabilitation - 4200 pipe (IPS, 4 equally spaced green colour stripes are std or green coloured shell on special order) & 4300 pipe (DIPS, 3 equally spaced green colour stripes are std or green coloured shell on special order).

Industrial sewer, municipal sewer, sliplining & trenchless rehabilitation - 4600 (solid light gray), 4700 (green colour stripes) & 1200 (light gray lining extruded into pipe ID).

Categories: 
Drainage and Sewer Works | Sanitary Sewers | Pipe | Polyethylene (HDPE)
Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Polyethylene
Utility Works | Waterworks | Pipe | Polyethylene (PE)
Prequalification Lists: 
Regional Municipality of Halton - 4.70.62.64 - Polyethylene (HDPE) (PDF)
  • ASTM International
    • ASTM D1238-10 - Flow Rates of Thermoplastics by Extrusion Plastometer
    • ASTM D1505-10 - Density of Plastics by the Density-Gradient Technique
    • ASTM D2240-05(2010) - Rubber Property-Durometer Hardness
    • ASTM D2837-13e1 - Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
    • ASTM D3350-14 - Polyethylene Plastics Pipe and Fittings Materials
    • ASTM D638-14 - Tensile Properties of Plastics
    • ASTM D696-08e1 - Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C
    • ASTM D746-14 - Brittleness Temperature of Plastics and Elastomers by Impact
    • ASTM D790-10 - Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
    • ASTM F1473-13 - Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
    • ASTM F412-12 - Plastic Piping Systems
    • ASTM F714-13 - Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • Other Standards
    • AWWA C906-07 - Polyethylene (PE) Pressure Pipe and Fittings, 4 in. (100 mm) Through 63 in. (1,600 mm), for Water Distribution and Transmission
    • NSF/ANSI 61-2012 - Drinking Water System Components - Health Effects
  • Manufacturer
    • Performance Pipe

© 1997 - 2024. The Road Authority. All rights reserved.

Terms of use | Privacy policy