CWS100

Manufactured by Concrete Waterproofing Systems Worldwide
Brand: CONCRETE WATERPROOFING SYSTEMS WORLDWIDE

CWS100 is a modified sodium silicate which is sprayed onto cured concrete. It forms a barrier inside the concrete,
which waterproofs and protects the concrete from corrosion and degradation, for the design life of the structure.
CWS100 reacts with calcium to form a water insoluble calcium silicate hydrate gel, that seals the cracks, pores and
capillaries of the concrete. It will seal cracks in the concrete up to 2.2mm and will remain reactive in the concrete to seal
future hairline cracks on contact with water

Categories:

Chemicals / Bio-Chemicals | Concrete Related Products

Structures and Structural | Concrete | Sealers, Protectants | Corrosion Inhibitor

Structures and Structural | Concrete | Sealers, Protectants | Sealer

Structures and Structural | Concrete | Sealers, Protectants | Waterproofing, Cementitious, Capilliary Crystalline Waterproofing (CCCW)

Structures and Structural | Deck Waterproofing

ASTM International
- ASTM C1202-19 - RAPID CHLORIDE PERMEABILITY TEST
- ASTM C952-12 - Bond Strength of Mortar to Masonry Units
- ASTM D1644-01(2012) - Nonvolatile Content of Varnishes
- ASTM E514/E514M-14a - Water Penetration and Leakage Through Masonry
Comité Européen de Normalisation/European Committee for Standardization/Europaisches Komitee fur Normung
- BS EN 1504-2:2004 - Definitions, requirements, quality control and evaluation of conformity. Surface protection systems for concrete
BS EN ISO
- (BS EN 1542 : 1999 - BOND STRENGTH BY PULL-OFF
- BS EN 14630:2006 (BS EN 1504-2:2004, EN 1766 ) - DETERMINATION OF CARBONATION DEPTH IN HARDENED CONCRETE BY THE PHENOLPTHALEIN METHOD (DEPTH OF PENETRATION OF CONCRETE TEST)
EN (European Standard)
- (EN 101 : 1991) - DETERMINATION OF SCRATCH HARDNESS OF SURFACE
- (EN 13036-4 : 2011) - SLIP RESISTANCE

Manufacturer
- Concrete Waterproofing Systems Worldwide

CWS100

About

Membership

Links