Flowtite® FRP Pipe


Manufactured by Flowtite Pipe USA
Brand: Flowtite®

Flowtite® Fiberglass Reinforced Pipe (FRP)

Categories: 
Drainage and Sewer Works | Sanitary Sewers | Pipe
Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Relining
Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Tunnel Liners
Utility Works | Forcemains
Utility Works | Waterworks | Pipe | Composite
Utility Works | Waterworks | Repair / Rehabilitation

Certifications: PMC - Accepted for Use Durham Region Approved Products List Region of Halton Prequalified Products List

Prequalification Lists: 
Regional Municipality of Durham - 4.70.62.90 - Fiberglass Reinforced Pipe (FRP) (PDF)
Regional Municipality of Halton - 7.95.62.89 - Glass Reinforced Polymer (GRP) (PDF)
Regional Municipality of Halton - 4.70.62.89 - Glass Reinforced Polymer (GRP) (PDF)
Regional Municipality of Durham - 4.72.62.69 - Fiberglass Reinforced Pipe (FRP) (PDF)
Regional Municipality of Durham - 7.95.62.69 - Fiberglass Reinforced Pipe (FRP) (PDF)
  • American Society for Testing and Materials
    • ASTM D2321-14e1 - Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
    • ASTM D2412-11 - Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    • ASTM D2992-12 - Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    • ASTM D3262-11 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
    • ASTM D3517-14 - Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
    • ASTM D3681-12e1 - Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
    • ASTM D3754-14 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
    • ASTM D4161-14 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
    • ASTM D638-14 - Tensile Properties of Plastics
    • ASTM F477-08 - Elastomeric Seals (Gaskets) for Joining Plastic Pipe
  • Other Standards
    • AWWA C950-13 - Fiberglass Pressure Pipe
    • AWWA M45 Manual - Fiberglass Pipe Design, Third Edition
    • ISO 10467:2004 - Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
    • ISO 10639:2004 - Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
    • NSF/ANSI 61-2012 - Drinking Water System Components - Health Effects

Cal Reaume
Flowtite Pipe USA
18585 Samuels Rd.
Zachary LA 70791
USA
Cal.Reaume@iconixww.com
http://www.flowtitepipe.com
Cellular: 905-805-1014