 | SSPC - Seventh Edition, 1995 - Systems and Specifications |
| SSPC Painting Manual, Volume 1, 3rd Edition - Good Painting Practice |
| SSPC-AB 1 - Mineral and Slag Abrasives |
| SSPC-AB 2 - Cleanliness of Recycled Ferrous Metallic Abrasives |
| SSPC-AB 3 - Newly Manufactured or Re-Manufactured Steel Abrasives |
| SSPC-CS 23.00(I) - Interim Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel |
| SSPC-Guide 10 - Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content Requirements |
| SSPC-Guide 11 - Guide for Coating Concrete |
| SSPC-Guide 12 - Guide for Illumination of Industrial Painting Projects |
| SSPC-Guide 13 - Guide for the Identification and Use of Industrial Coating Material in Computerized Product Databases |
| SSPC-Guide 14 - Guide for the Repair of Imperfections in Galvanized or Inorganic Zinc Coated Steel Using Organic Zinc-Rich Coating |
| SSPC-Guide 6 - Guide for Containing Debris Generated During Paint Removal Operations |
| SSPC-Guide 7 - Guide for the Disposal of Lead-Contaminated Surface Preparation Debris |
| SSPC-Guide 9 - Guide for Atmospheric Testing of Coatings in the Field |
| SSPC-ME 1 - Uncontaminated Rusted Steel |
| SSPC-PA 1 - Shop, Field, and Maintenance Painting of Steel |
| SSPC-PA 2 - Measurement of Dry Coating Thickness With Magnetic Gages |
| SSPC-PA COM - Commentary on Paint Application |
| SSPC-PA Guide 3 - A Guide to Safety in Paint Application |
| SSPC-PA Guide 4 - Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems |
| SSPC-PA Guide 5 - Guide to Maintenance Painting Programs |
| SSPC-Paint 101 - Aluminum Alkyd Paint (Type I, Leafing and Type II, Non-Leafing) |
| SSPC-Paint 102 - Black Alkyd Paint |
| SSPC-Paint 103 - Black Phenolic Paint |
| SSPC-Paint 104 - White or Tinted Alkyd Paint |
| SSPC-Paint 106 - Black Vinyl Paint |
| SSPC-Paint 108 - High-Build Thixotropic Leafing Aluminum Paint |
| SSPC-Paint 11 - Red Iron Oxide, Zinc Chromate, Raw Linseed Oil, and Alkyd Primer |
| SSPC-Paint 12 - Cold-Applied Asphalt Mastic (Extra Thick Film) |
| SSPC-Paint 15 - Steel Joist Shop Primer |
| SSPC-Paint 16 - Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint |
| SSPC-Paint 17 - Chlorinated Rubber Inhibitive Primer |
| SSPC-Paint 18 - Chlorinated Rubber Intermediate Coat Paint |
| SSPC-Paint 19 - Chlorinated Rubber Topcoat Paint |
| SSPC-Paint 20 - Zinc-Rich Primers (Type I, Inorganic, and Type II, Organic) |
| SSPC-Paint 21 - White or Colored Silicone Alkyd Paint |
| SSPC-Paint 22 - Epoxy-Polyamide Paints (Primer, Intermediate, and Topcoat) |
| SSPC-Paint 23 - Latex Primer for Steel Surfaces |
| SSPC-Paint 24 - Latex Semigloss Exterior Topcoat |
| SSPC-Paint 25 - Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel, Type I and Type II |
| SSPC-Paint 25.1BCS - Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel |
| SSPC-Paint 26 - Slow Drying Linseed Oil Black Maintenance Primer, (Without Lead and Chromate Pigment) |
| SSPC-Paint 27 - Basic Zinc Chromate-Vinyl Butyral Wash Primer |
| SSPC-Paint 28 - Water-Borne Epoxy Primer for Steel Surfaces |
| SSPC-Paint 29 - Zinc Dust Sacrificial Primer, Performance-Based |
| SSPC-Paint 30 - Weld-Through Inorganic Zinc Primer |
| SSPC-Paint 31 - Single-Package Waterborne Alkyd Primer for Steel Surfaces, Performance-Based |
| SSPC-Paint 32 - Coal Tar Emulsion Coating |
| SSPC-Paint 33 - Coal Tar Mastic, Cold Applied |
| SSPC-Paint 34 - Water-Borne Epoxy Topcoat for Steel Surfaces |
| SSPC-Paint 35 - Medium Oil Alkyd Primer (Air Dry/Low Bake), Type I and Type II |
| SSPC-Paint 36 - Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-Based |
| SSPC-Paint 5 - Zinc Dust, Zinc Oxide, and Phenolic Varnish Paint |
| SSPC-Paint 8 - Aluminum Vinyl Paint |
| SSPC-Paint 9 - White (or Colored) Vinyl Paint |
| SSPC-Paint COM - Commentary on Paint Specifications |
| SSPC-PS 1.09 - Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment) |
| SSPC-PS 1.10 - Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment) |
| SSPC-PS 1.12 - Three-Coat Oil Base Zinc Chromate Painting System |
| SSPC-PS 1.13 - One-Coat Oil Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments) |
| SSPC-PS 10.01 - Hot-Applied Coal Tar Enamel Painting System |
| SSPC-PS 10.02 - Cold-Applied Coal Tar Mastic Painting System |
| SSPC-PS 11.01 - Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System |
| SSPC-PS 12.01 - One-Coat Zinc-Rich Painting System |
| SSPC-PS 13.01 - Epoxy Polyamide Painting System |
| SSPC-PS 14.01 - Steel Joist Shop Painting System |
| SSPC-PS 15.01 - Chlorinated Rubber Painting System for Salt Water Immersion |
| SSPC-PS 15.02 - Chlorinated Rubber Painting System for Fresh Water Immersion |
| SSPC-PS 15.03 - Chlorinated Rubber Painting System for Marine and Industrial Environments |
| SSPC-PS 15.04 - Chlorinated Rubber Painting System for Field Application Over a Shop-Applied Solvent Base Inorganic Zinc-Rich Primer |
| SSPC-PS 16.01 - Silicone Alkyd Painting System for New Steel |
| SSPC-PS 18.01 - Three-Coat Latex Painting System |
| SSPC-PS 24.00 - Latex Painting System for Industrial and Marine Atmospheres, Performance-Based |
| SSPC-PS 26.00 - Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based Type I, for Use over Blast Cleaned Steel Type II, for Use over Hand Cleaned Steel |
| SSPC-PS 27.00 - Alkyd Coating System Materials Specification, Performance-Based |
| SSPC-PS 4.02 - Four-Coat Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres) |
| SSPC-PS 4.04 - Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres) |
| SSPC-PS 9.01 - Cold-Applied Asphalt Mastic Painting System with Extra-Thick Film |
| SSPC-PS COM - Commentary on Painting Systems |
| SSPC-PS Guide 1.00 - Guide for Selecting Oil Base Painting Systems |
| SSPC-PS Guide 12.00 - Guide to Selecting Zinc-Rich Coating Systems |
| SSPC-PS Guide 15.00 - Guide for Selecting Chlorinated Rubber Painting Systems |
| SSPC-PS Guide 17.00 - Guide for Selecting Urethane Painting Systems |
| SSPC-PS Guide 19.00 - Guide for Selecting Painting Systems for Ship Bottoms |
| SSPC-PS Guide 2.00 - Guide for Selecting Alkyd Painting Systems |
| SSPC-PS Guide 20.00 - Guide for Selecting Painting Systems for Boottoppings |
| SSPC-PS Guide 21.00 - Guide for Selecting Painting Systems for Topsides |
| SSPC-PS Guide 22.00 - Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems |
| SSPC-PS Guide 3.00 - Guide for Selecting Phenolic Painting Systems |
| SSPC-PS Guide 4.00 - Guide for Selecting Vinyl Painting Systems |
| SSPC-PS Guide 7.00 - Guide for Selecting One-Coat Shop Painting Systems |
| SSPC-PS Guide 8.00 - Guide to Topcoating Zinc-Rich Primers |
| SSPC-QP 1 - Standard Procedure for Evaluating Painting Contractors (Field Application to Complex Industrial Structures) |
| SSPC-QP 2 - Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures) |
| SSPC-QP 3 - Standard Procedure for Evaluating Qualifications of Shop Painting Applicators |
| SSPC-QP 4 - Standard Procedure for Evaluating the Qualifications of Contractors Disturbing Hazardous Coatings During Demolition and Repair Work |
| SSPC-QP 5 - Standard Procedure for Evaluating Qualifications of Coating and Lining Inspection Companies |
| SSPC-QP COM - Commentary on Qualification Procedures |
| SSPC-SP 1 - Solvent Cleaning |
| SSPC-SP 10/NACE No. 2 - Near-White Blast Cleaning |
| SSPC-SP 11 - Power Tool Cleaning to Bare Metal |
| SSPC-SP 12/NACE No. 5 - Surface Preparation and Cleaning of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to Recoating |
| SSPC-SP 13/NACE No. 6 - Surface Preparation of Concrete |
| SSPC-SP 14/NACE No. 8 - Industrial Blast Cleaning |
| SSPC-SP 2 - Hand Tool Cleaning |
| SSPC-SP 3 - Power Tool Cleaning |
| SSPC-SP 5/NACE No. 1 - White Metal Blast Cleaning |
| SSPC-SP 6/NACE No. 3 - Commercial Blast Cleaning |
| SSPC-SP 7/NACE No. 4 - Brush-Off Blast Cleaning |
| SSPC-SP 8 - Pickling |
| SSPC-SP COM - Surface Preparation Commentary for Steel and Concrete Substrates |
| SSPC-TR 1/NACE 6G194 - Thermal Pre-Cleaning |
| SSPC-TR 2/NACE 6G198 - Wet Abrasive Blast Cleaning |
| SSPC-TU 1 - Surface-Tolerant Coatings for Steel |
| SSPC-TU 2/NACE 6G197 - Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment |
| SSPC-TU 3 - Overcoating |
| SSPC-TU 4 - Field Methods for Retrieval and Analysis of Soluble Salts on Substrates |
| SSPC-TU 5 - Accelerated Testing of Industrial Protective Coatings |
| SSPC-TU 6 - Chemical Stripping of Organic Coatings From Steel Structures |
| SSPC-TU 7 - Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance Activities |
| SSPC-VIS 1-89 - Visual Standard for Abrasive Blast Cleaned Steel |
| SSPC-VIS 2 - Standard Method for Evaluating Degree of Rusting on Painted Steel Surfaces |
| SSPC-VIS 3 - Visual Standard for Power- and Hand-Tool Cleaned Steel |
| SSPC-VIS 4(I)/NACE No. 7 - Interim Guide and Visual Reference Photographs for Steel Cleaned by Waterjetting |
