Home
Armtec Limited
Armtec provides products & engineered solutions meeting the challenges of the civil engineering industry. Armtec products have become industry standards such as, Hel-cor pipe, guide rail, Super-Span bridges, tunnel liner plate & mineways to name a few.
Category: Manufacturer

Products
* For product details select the down arrow.
Armtec Construction Products - Engineering     

Armtec's engineered construction products are provided with detailed installation instructions and custom drawings for client-specific applications, and technical support.

Categories:  Buildings and Architecture | Earth Retainment/ Erosion Control

Catchbasin, Corrugated Steel    PMC - Accepted for Use  

Corrugated Steel Storm Sewer Catchbasin

Categories:  Drainage and Sewer Works | Maintenance Hole, Catch Basin, Ditch Inlet Units and Valve Chambers | Steel

Corrugated Steel Pipe Catch Basins and Maintenance Holes    PMC - Accepted for Use  

Corrugated steel pipe catch basins and maintenance holes for storm sewer systems

Categories:  Drainage and Sewer Works | Maintenance Hole, Catch Basin, Ditch Inlet Units and Valve Chambers | Steel

Erosion Control Blankets     

Combining geosynthetic netting with natural straw and/or coconut fibres, Erosion Control Blankets are highly effective in controlling erosion forces and promoting vegetative growth throughout a wide range of geometric and hydrogeologic conditions.

Categories:  Buildings and Architecture | Earth Retainment/ Erosion Control

Geocells (Cellular Confinement Systems)     

Geoweb?s® unique cellular design permits the use of common infill materials in demanding Load Support, Erosion Control and Earth Retention applications.

Categories:  Pavements | Soil Stabilization

Drainage and Sewer Works | Erosion Control | Vegetative | Geocells

Drainage and Sewer Works | Headwalls

Structures and Structural | Retaining Walls | Cellular
Geogrids     

Manufactured using high strength polyester fibres, Armtec geogrids are primarily used to reinforce soils in retaining wall, steepened slope and embankment stabilization applications.

Categories:  Structures and Structural | Retained Soil Systems (RSS) | Wall / Slope

General Construction | Slopes (Geogrids)

General Construction | Embankments | Geogrids
Geogrids - BXG11, BXG12     

Open mesh rigid bi-axial geogrids for use in reinforcing road base courses and stabilizing weak sub-grades.

Categories:  General Construction | Embankments | Geogrids

Pavements | Base Reinforcement | Geogrids
Geosynthetics     

Since 1983, Armtec has provided Geosynthetic solutions to the civil engineering & construction sector. Armtec's products are cost-effective solutions with a wide range of applications; from soil stabilization to geomembrane protection.

Categories:  Buildings and Architecture | Earth Retainment/ Erosion Control

General Construction | Soil Mechanics | Geotextiles

General Construction | Soil Mechanics | Geogrids

General Construction | Soil Mechanics | Geocells
Geotextiles - Armtec 140    PMC - Accepted for Use  

Geotextile, class I (light duty), non-woven, filtrat'n opening size (FOS) = 115 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class I (Light Duty) | Non-Woven

Geotextiles - Armtec 150    PMC - Accepted for Use  

Geotextile, class I (light duty), non-woven, filtrat'n opening size (FOS) = 145 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class I (Light Duty) | Non-Woven

Geotextiles - Armtec 160     

Geotextile, class I (light duty), non-woven

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Sub-Drain | Steel

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Sub-Drain | Polyethylene

General Construction | Soil Mechanics | Geotextiles | Class I (Light Duty) | Non-Woven
Geotextiles - Armtec 170    PMC - Accepted for Use  

Geotextile, class I (light duty), non-woven, filtrat'n opening size (FOS) = 100 micron

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Sub-Drain

General Construction | Soil Mechanics | Geotextiles | Class I (Light Duty) | Non-Woven
Geotextiles - Armtec 200    PMC - Accepted for Use  

Geotextile, class II (heavy duty), non-woven, filtrat'n opening size (FOS) = 90 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Non-Woven

Geotextiles - Armtec 230    PMC - Accepted for Use  

Geotextile, class II (heavy duty), non-woven, filtrat'n opening size (FOS) = 75 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Non-Woven

Geotextiles - Armtec 250    PMC - Accepted for Use  

Geotextile, class II (heavy duty), non-woven, filtrat'n opening size (FOS) = 75 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Non-Woven

Geotextiles - Armtec 300    PMC - Accepted for Use  

Geotextile, class II (heavy duty), non-woven, filtrat'n opening size (FOS) = 75 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Non-Woven

Geotextiles - Armtec 350    PMC - Accepted for Use  

Geotextile, class II (heavy duty), non-woven, filtrat'n opening size (FOS) = 70 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Non-Woven

Geotextiles - Armtec 400    PMC - Accepted for Use  

Geotextile, class II (heavy duty), non-woven, filtrat'n opening size (FOS) = 65 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Non-Woven

Geotextiles - Armtec 825    PMC - Accepted for Use  

Geotextile, class I (light duty), woven, filtrat'n opening size (FOS) = 300 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class I (Light Duty) | Woven

Geotextiles - Armtec 835    PMC - Accepted for Use  

Geotextile, class II (heavy duty), woven, filtrat'n opening size (FOS) = 200 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Woven

Geotextiles - Armtec 855    PMC - Accepted for Use  

Geotextile, class II (heavy duty), woven, filtrat'n opening size (FOS) = 200 micron

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Woven

Geotextiles - F402, FW404, FW700     

High strength woven geotextile manufactured from polypropylene monofilament yarns for use over weak sub-grade, retaining walls and filtration

Brand Name: TC Mirafi

Categories:  Grading | Swamp Treatment

General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Woven
Geotextiles - High Strength     

High strength woven geotextile manufactured from high tenacity polyester filaments for use over weak sub-grade and retaining walls.

Categories:  General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Woven

Geotextiles - HP270, HP370, HP 465, HP 565, HP570, HP665,HP770     

High strength woven geotextiles manufactured from high tenacity polypropylene filaments for use over weak sub-grade and retaining walls

Brand Name: TC Mirafi

Categories:  Grading | Swamp Treatment

General Construction | Soil Mechanics | Geotextiles | Class II (Heavy Duty) | Woven
Pipe, HDPE, BOSS 2000    PMC - Accepted for Use  

High density polyethylene pipe for storm sewer and culvert applications, smooth inside and corrugated outside with split coupler, and Bell & Spigot coupler for sewers - flexible & rigid (rigid pipe as defined by MTO).

Brand Name: BOSS 2000

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Rigid Pipe

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Polyethylene
Pipe, HDPE, Polytite    PMC - Accepted for Use  

Flexible high density polyethylene pipe, smooth inside and corrugated outside, with Bell and Spigot coupler for sanitary sewer-flexible & rigid (rigid pipe as defined by MTO).

Brand Name: Polytite

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Rigid Pipe

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Polyethylene

Drainage and Sewer Works | Sanitary Sewers | Pipe | Polyethylene

Drainage and Sewer Works | Sanitary Sewers | Pipe Accessories | Fittings
Pipe, Polyethylene, BOSS Tubing    PMC - Accepted for Use  

Polyethylene tubing for subdrain applications, corrugated, perforated, wrapped (sock or geotextile).

Brand Name: BOSS Tubing

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Sub-Drain | Polyethylene

Pipe, Steel, Helical    PMC - Accepted for Use  

Pipe culvert, sewer and fittings, corrugated, galvanized and aluminized steel - type 2

Brand Name: Hel-Cor

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Corrugated Steel

Pipe, Steel, Smooth Inside, Armtec ULTRA FLO    PMC - Accepted for Use  

Pipe culvert, sewer and fittings, exterior ribbed, galvanized and aluminized steel - type 2 for flexible and rigid pipe applications (rigid pipe as defined by MTO).

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Rigid Pipe

Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Corrugated Steel
Pipe, Steel, Structural Plate, Armtec BRIDGE-PLATE    PMC - Accepted for Use  

Large corrugation steel plates used to construct long span soil steel structures of various shapes including arches and box culverts.

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Flexible Pipe | Corrugated Steel

Structures and Structural | Structures, Prefabricated

Structures and Structural | Structures, Modular
Pipe, Steel, Subdrain, Armtec HEL-COR    PMC - Accepted for Use  

Corrugated steel pipe subdrain and fittings

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Sub-Drain | Steel

Platon Foundation Protector    PMC - Information Only  

Air gap membrane used to protect any below grade structure from moisture.

Brand Name: System Platon

Categories:  Buildings and Architecture | Building Products

Retained Soil Systems, MTO Approved Retaining Walls (Permanent & Temporary) & Steepened Slopes    PMC - Accepted for Use  

Retaining Wall-Geoweb panels, stacked at the wall face & geosynthetic tieback. Steep Slope-Geogrid tiebacks with Geoweb(on slope face), infilled & seeded, provides Erosion Control. Wrapped face temporary retaining wall (geotextile & temporary forms)

Categories:  Structures and Structural | Retained Soil Systems (RSS) | Wall / Slope

Structures and Structural | Retaining Walls | Cellular
Retaining Wall, Armtec BIN WALL    PMC - Accepted for Use  

Gravity retaining wall of steel elements forming bins with stabilizing fill

Categories:  Structures and Structural | Retaining Walls | Cellular

S-75    PMC - Accepted for Use  

Mat of 100% agricultural straw; covered on the top side with a lightweight photodegradable polypropylene netting sewn together with degradable thread.

Categories:  Drainage and Sewer Works | Erosion Control | Vegetative | Blankets

Traffic Barrier, Box Beam    PMC - Accepted for Use  

Steel Box Beam, Steel Posts, Splice Plate, Anchor Block, Angle Mount and Fittings

Categories:  Traffic Barriers | Guide Rail, Box Beam | Beam and Fittings

Traffic Barrier, Steel Beam    PMC - Accepted for Use  

Steel Rail, Steel Channel, Steel Base, Barrier bolts, Nuts, Nut Retainers, Shims, Washers and Fittings

Categories:  Traffic Barriers | Guide Rail, Steel Beam

Tunnel Liner, Steel    PMC - Accepted for Use  

Steel tunnel liner, metric, 500 mm, L18

Categories:  Drainage and Sewer Works | Storm Sewers, Culverts and Sub-Drains | Tunnel Liners

Void Form, Steel    PMC - Accepted for Use  

Corrugated steel and galvanized spiral pipe void forms

Categories:  Structures and Structural | Decks | Void Forms


Products Distributed
CIF Composites Inc   
Pro-Eco-LiteTM Culvert Weir Headwall     
Weir headwalls will, by adding weir boards, control water levels and discharge to maintain water levels for agricultural purposes. They also aid in flood control and other water management applications. Weir boards are fabricated from recyclable plastic wood providing long life and an environmentally friendly installation.

Pro-Eco-LiteTM Headwall     
Composite headwall structure provides an efficient and economical system for flood, stream, erosion, debris safety and animal control in an environmentally friendly culvert or pipe end system. Manufactured using composite reinforced polymer concrete containing chemically resistant fire retardants, UV stabilized non-leaching and non-corrosive properties. The product has been used in environmentally sensitive fish habitats by the BC Ministry of Transportation and Highways and is on their Recognized Products List.

XPORTTM Headwall Insert     
XPORTTM two-piece construction permits quick interchanging of various pipe types and sizes within the various headwall size ranges.

Contech Construction Products Inc.   
ChamberMaxxTM     
A corrugated, open-bottom, underground polypropylene arch system, designed to economically collect, detain and/or retain and infiltrate, stormwater runoff.

Vortechs® System    PMC - Accepted for Use  
The Vortechs® System meets stormwater regulations by efficiently removing contaminated sediment, floating hydrocarbons, and debis from stormwater. This high performance system uses an effective combination of swirl-concentrator and Flow-control technologies to minimize turbulance within the system. These features provide for the physical separation and capture of sediment and oils, and work to prevent the re-suspension and release of trapped pollutants

VortSentryTM    PMC - Accepted for Use  
The VortSentryTM is an effective treatment option for tight sites, retrofits, and other projects where space is at a premium and efficiency is a must. In addition to stand alone applications, the VortSentryTM is ideally suited as a pretreatment device for other BMP's. The VortSentryTM hydrodynamic separator utilizes a combination of vortex motion and flow controls to remove sediment, oil and debris from polluted stormwater runoff. All VortSentryTM models are configured with a flow partition to prevent pollutant re-suspension and re-entrainment. The system features a round concrete manhole structure for easy installation, and unobstructed maintenance access.

Demtec Enterprises Inc.   
Wood Stakes for Silt Fence     
Wooden kiln dried spruce stakes 50 mm x 50 mm x 1.2 m pointed at one end with a 4 sided point per OPSS 577. Silt fence with 14 stakes spaced 2.2 m in pre-assembled 30.48 m (100 foot) rolls using pre-qualified woven geotextiles for light duty silt fence.

Presto Products Company   
Geoweb Cellular Confinement System - Perforated and Non-perforated     
Honeycomb-like heavy duty polyethylene sections forming a grid, confining native/imported soils and granulars, in single, multiple, horizontal, slope and tiered configurations. Presto Info

Associations
Corrugated Polyethylene Pipe Association (CPPA)
Corrugated Steel Pipe Institute (CSPI)
National Corrugated Steel Pipe Association (NCSPA)
Ontario Good Roads Association (OGRA)
Ontario Road Builders Association (ORBA)
Contacts

Ken MacDougall
Canadian Sales Manager - Building Trades
Armtec Limited
33 Centennial Road
Orangeville, ON    L9W 1R1
Phone: 800-265-7622
Fax: 877-571-9829
Toll Free: 800-265-7622
Email: kmacdougall@armtec.com
Web: http://www.systemplaton.com
 

Doug Lowry, P.Eng.
Region Engineer
Armtec Limited
116 Corstate Rd
Concord, ON    L4K 4X2
Phone: 905-738-3173
Fax: 905-738-5039
Cellular: 905-577-3728
Email: dlowry@armtec.com
Web: http://www.armtec.com