Crack Sealant - Ultraseal 3407 LM

Low modulus, rubberized asphalt, hot poured, all MTO districts, pour temp 175 - 190 deg Celsius per MTO report. Ultraseal Info .

Categories:

Pavements | Asphaltic | Crack Sealants - Hot Poured

Pavements | Concrete | Joint Sealant - Hot Poured

Certifications: PMC - Accepted for Use MTO DSM

Ontario Provincial Standards
- OPSD 3370.100 - Deck, Waterproofing Hot Applied Asphalt Membrane with Protection Board
- OPSD 3370.101 - Deck, Waterproofing Hot Applied Asphalt Membrane at Active Cracks Greater than 2 mm Wide and Construction Joints
- OPSD 508.010 - Routing and Sealing Cracks up to 20mm in Width in Asphalt Pavement
- OPSS 1212 - Hot-Poured Rubberized Asphalt Joint Sealing Compound
- OPSS 341 - Routing and Sealing Cracks in Hot Mix Asphalt Pavement
ASTM International
- ASTM D36/D36M-14e1 - Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM D5329-09 - Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

Manufacturer
- Crafco Inc.

Mike Sucee, Canada Area Manager
Crafco Inc. (ON)
784 Tauton Road East, PO Box 78045
Oshawa ON L1H 7K0
mike.sucee@crafco.com
http://www.crafco.com
Phone: 905-629-2209
Cellular: 647-405-4898
Fax: 905-629-3761

Mike Sucee, Canada Area Manager
Crafco Inc.
6165 W. Detroit St.
Chandler AZ 85226 2601
mike.sucee@crafco.com
http://www.crafco.com
Phone: 602-276-0406
Cellular: 647-405-4898
Fax: 480-961-0513

Crack Sealant - Ultraseal 3407 LM

About

Membership

Links